Tag Archives: AutoCAD 2000i

Installing AutoCAD Land Development Desktop R2i on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD Land Development Desktop R2i (LDDT R2i) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…
  1. Obtain your copy of the Longbow Converter here – you will need version 8.56 or newer
  2. Using Windows Explorer, copy your entire LDDT R2i 2000i installation CD to your hard drive, specifically to a folder path of c:\Autodesk\CD\ldtr2000i
  3. Start the Longbow Converter tool, select the 2nd tab “Old AutoCAD Installer Reviver”, pick the c:\Autodesk\CD\ldtr2000i folder, and click Run. Read and understand any/all the prompts the Converter pops up before pressing OK.
  4. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\ldt2000i (not C:\Program Files (x86)\Land Desktop R2\ as usually prompted)**
    1. Install as normal
    2. If you see the “AutoCAD Land Development Desktop 2i Migration assistant” dialog appear, say “No” – we did not test that installation path.
    3. Do not reboot if prompted to do so
  5. Make sure the setup is completely closed down, next, go back to the Converter tool, select the 3rd tab “Old AutoCAD Program Reviver”, pick the newly installed c:\ldt2000i folder and click “Fix“
  6. Now you can run your Land Desktop R2i on Windows 7, Windows 8, and Windows 10, but be sure to read the Troubleshooting guide below…

Installing Autodesk Civil Design 2i

Once you have installed AutoCAD Land Development Desktop R2i using the above instructions, you can now install Civil. Here’s how:

  1. Using Windows Explorer, copy your Autodesk Civil Design 2i installation CD to your hard drive, specifically to a folder path of c:\Autodesk\CD\CivilDesign2000i
  2. Start the Converter again, select the 2nd tab “Old AutoCAD Installer Reviver”, pick the c:\Autodesk\CD\CivilDesign2000i folder, and click “Run“.
    1. If the Converter asks you “What type of installer is this? – Is this a service pack , update or plug-in/app…?” – say “Yes”.
    2. Read and understand any/all the prompts the Converter pops up before pressing OK
  3. Install as normal.
    1. If you cannot find your menu items, you may need to MENULOAD c:\ldt2000i\Support\Civil.mnu

Installing Autodesk Survey 2i

Once you have installed AutoCAD Land Development Desktop R2i using the above instructions, you can now install Survey. Here’s how:

  1. Using Windows Explorer, copy your Autodesk Survey 2i installation CD to your hard drive, specifically to a folder path of c:\Autodesk\CD\Survey2000i
  2. Start the Converter again, select the 2nd tab “Old AutoCAD Installer Reviver”, pick the c:\Autodesk\CD\Survey2000i folder, and click “Run“.
    1. If the Converter asks you “What type of installer is this? – Is this a service pack , update or plug-in/app…?” – say “Yes”.
    2. Read and understand any/all the prompts the Converter pops up before pressing OK
  3. Install as normal.
    1. If you cannot find your menu items, you may need to MENULOAD c:\ldt2000i\Support\Survey.mnu

The LDT R2i Service Pack

  1. First download the Land Desktop 2i Civil Design 2i Service Pack 2 (stand-alone and network) from here and save to c:\Autodesk\sp
  2. Next, start the Converter, select the 3rd tab “Old AutoCAD Program Reviver” select the c:\Autodesk\sp folder, then click Fix.
    1. If asked if this is a service pack by the Converter tool, say yes.
  3. Now run the ld2i_sp2_ul.exe as normal from Windows Explorer.

Troubleshooting:

Copyright 2015 (c) Longbow Software

Installing AutoCAD 2000i on Windows 7, Windows 8 and Windows 10

Posted on by

AutoCAD 2000i users are very used to the software package and cannot do without it. With the latest hardware and required move to new Windows versions, you will run into multiple problems trying to get your AutoCAD running again. Follow these steps to get your AutoCAD running again on new versions of Windows…

NOTE: Be sure to follow the instructions precisely as documented including using the exact same folder names and paths. These are vital for the process to complete successfully.

How to install AutoCAD 2000i

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start In the Converter App and note the user interface
  3. Insert your AutoCAD 2000i CD into your computer
  4. Start the Longbow Converter tool
    1. Select the 2nd tab named “Old AutoCAD Installer Reviver“
    2. Using the “…” button pick your AutoCAD 2000i CD
    3. Click “Run Old Installer” and follow the Converter’s instructions.
    4. Once the AutoCAD 2000i setup starts, stop and read the next step…
  5. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acad2000i (not Program Files (x86)\AutoCAD 2000i as usually prompted by default)**
  6. Once setup has completed…
    1. Make sure to fully close the AutoCAD setup program 
    2. Back in the Converter app, make sure it has completed the final stage of processing using the “Old AutoCAD Program Reviver” tab – it should display “SUCCESS” in green…
    3. Now Reboot your PC
  7. Your AutoCAD 2000i is ready to run! Simply use Windows Explorer, navigate to c:\acad2000i and double click acad.exe (if you want a shortcut on the Desktop you will have to manually create it). 

Installing the AutoCAD 2000i sp2 service pack

  1. download the locked AutoCAD 2000i sp2 from here or download the unlocked AutoCAD 2000i sp2 from here
  2. Next, unzip and save the service pack file to c:\Autodesk\sp – do not install yet
  3. Go back into the Converter, select the 3rd tab, select the c:\Autodesk\sp folder and click Fix.
  4. Install the 2000i sp2 by running either the c:\Autodesk\sp\u090_u181p.exe for unlocked or c:\Autodesk\sp\u090_u181p_swl.exe for locked
  5. Once your sp is installed, start the Longbow Converter tool again; we are going to repeat some of the steps from the original installation before. Select the 2nd tab, pick the copy of your AutoCAD 2000i CD on your hard drive which last time was in c:\Autodesk\acad2000i folder, now select the 3rd tab, select the install folder c:\acad2000i now click Fix.
  6. Now, you can happily run your AutoCAD 2000i with sp2 on Windows 10, Windows 7 and Windows 8.


Troubleshooting

 
Copyright 2021 (c) Longbow Software

Installing AutoCAD LT 2000i on Windows 7, Windows 8 and Windows 10

Posted on by

AutoCAD LT 2000i users are very used to the software package and cannot do without it. With the latest hardware and required move to new Windows versions, you will run into multiple problems trying to get your AutoCAD running again. Follow these steps to get your AutoCAD running again on new versions of Windows…

NOTE: Be sure to follow the instructions precisely as documented including using the exact same folder names and paths. These are vital for the process to complete successfully.

How to install AutoCAD LT 2000i

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start In the Converter App and note the user interface
  3. Insert your AutoCAD LT 2000i CD into your computer
  4. Start the Longbow Converter tool
    1. Select the 2nd tab named “Old AutoCAD Installer Reviver“
    2. Using the “…” button pick your CD Rom with the AutoCAD CD inside
    3. Click “Run Old Installer” and follow the Converter’s instructions.
    4. Once the AutoCAD LT 2000i setup starts, stop and read the next step…
  5. In the setup program
    1. navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acadlt2000i (not Program Files (x86)\AutoCAD  LT 2000i as usually prompted by default)**
    2. If you see an error message about “Windows Netmeeting 3.01: Command line option syntax error“, you can ignore this error by simply clicking OK
  6. Once setup has completed…
    1. Make sure to fully close the AutoCAD setup program
    2. Back in the Converter app, make sure it has completed the final stage of processing using the “Old AutoCAD Program Reviver” tab – it should display “SUCCESS” in green…
    3. Now Reboot your PC
  7. Your AutoCAD LT 2000 is ready to run! Simply use Windows Explorer, navigate to c:\acadlt2000i and double click aclt.exe (if you want a shortcut on the Desktop you will have to manually create it).

Installing the AutoCAD LT 2000i sp2 service pack

 
  1. download the locked AutoCAD LT 2000i sp2 from here or download the unlocked AutoCAD 2000i LT sp2 from here
  2. Next, unzip and save the service pack file to c:\Autodesk\sp – do not install yet
  3. Go back into the Converter, select the 3rd tab, select the c:\Autodesk\sp folder and click Fix.
  4. Install the LT 2000i sp2 by running either the c:\Autodesk\sp\u090_u181p.exe for unlocked or c:\Autodesk\sp\u090_u181p_swl.exe for locked
  5. Once your sp is installed, start the Longbow Converter tool again; we are going to repeat some of the steps from the original installation before. Select the 2nd tab, pick the copy of your AutoCAD LT 2000i CD on your hard drive which last time was in c:\Autodesk\acadlt2000i folder, now select the 3rd tab, select the install folder c:\acadlt2000i now click Fix.
  6. Now, you can happily run your AutoCAD LT 2000i with sp2 on Windows 10, Windows 7 and Windows 8.

Troubleshooting

Copyright 2021 (c) Longbow Software