Categories: AutoCAD 2009

Install 32bit AutoCAD Electrical 2009 on Windows 7, Windows 8 and Windows 10

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Electrical® 2009”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Electrical® 2009. It cannot be installed on 64-bit Windows”

…Also, hung “Merging content…” message while installing…

Installing 32bit AutoCAD Electrical 2009 on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

First of all, you need V9.20 of the Longbow Converter (or newer) – obtain the latest version of the Longbow Converter here
If you have CDs (if not skip to step 3 below) you must copy ALL CDs to your hard drive using the following instructions…
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Electrical 2009 CD to your hard drive, to a folder path c:\Autodesk\AutoCADE2009
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADE2009 folder
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder name created for later use (we’ll refer to it from here as c:\Autodesk\AutoCADE2009), now click OK.
2. Wait until all of the files have extracted, when they do, the AutoCAD Electrical 2009 setup will automatically launch – simply close it and move to the next step.
Next start the Longbow Converter tool (V9.20 or newer)
1. select the 1st tab named “AutoCAD 32bit Installer Converter“
2. Pick the c:\Autodesk\AutoCADE2009 folder (where you copied the CDs to)
3. then click the “Convert…“ button
Once the conversion process is complete
1. click Install/Run Setup to start setup.
2. Install as normal, EXCEPT – you must install to “c:\AcadE2009” (<<< the exact text, anything else will fail!) instead of c:\Program Files (x86)\AutoCAD Electrical.
3. NOTE: Be sure to download any updates that the setup offers you.
Windows 8 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\Acade 2009 folder, then click Fix Old Program
Now you can happily run your AutoCAD 2009 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10.

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Tags: ...Also32bit64bit64bit WindowsAutoCAD Electrical 2009hung "Merging content..." while installing...InstallMerging content freezeMerging content hangThis is a 32-bit AutoCAD 'version'. It cannot be installed on 64-bit WindowsThis is a 32-bit AutoCAD® Electrical® 2009. It cannot be installed on 64-bit WindowsThis operating system is not supported by AutoCADWindows 10Windows 7Windows 8Windows 8.1You are attempting to use a 32-bit installer on a 64-bit operating systemYou cannot install this product on the current operating system

10 years ago

simonbooth

I just joined the Longbow Software team as a Software Engineer, and I have gladly offered to post some informative blogs for you all to read. Check on the left there, for all my blog entries...