Installing AutoCAD Mechanical 2008 from Inventor Series 2008 CD on Windows 10, Windows 7, Windows 8 and Windows 8.1
NOTE: This solution only works with an Autodesk Inventor Series 2008 installation media.
Installing Mechanical 2008 from Inventor Series 2008 CD on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…
NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.
Copy your Inventor Series 2008 CD to your hard drive, to a folder path c:\Autodesk\CDs\InventorSeries2008
IMPORTANT: If you have more than one CD, copy them all to the same c:\Autodesk\CDs\InventorSeries2008 folder – overwriting any existing files and folders.
Start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\CDs\InventorSeries2008folder.
The Converter will say that the media is not fully supported; simply click the Tools->Manual MSI Correction menu option
Once the conversion process is completed, click the “Run Setup/Install AutoCAD…” button to bring up your Inventor 2008 setup program as normal.
Un-check all install options except AutoCAD Mechanical 2008
Install as normal
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\MDT 2008 folder, then click “Fix“
Now you can happily run your AutoCAD Mechanical 2008 on Windows 10, Windows 7 or Windows 8.
Troubleshooting:
– If you are unable to activate your product, or the activation process crashes:
I just joined the Longbow Software team as a Software Engineer, and I have gladly offered to post some informative blogs for you all to read. Check on the left there, for all my blog entries...
Follow these instructions to solve issues around installing/running your legacy AutoCAD Mechanical 2000i on Windows 11 Ransomware Protection Windows 11 and…