Copy your Mathcad 2000 CD to your hard drive, to a folder path c:\InstallCDs\Mathcad2000
Start the Longbow Reviver tool
select the 1st tab named “Old Installer Reviver”
using the ‘…’ button, select folder c:\InstallCDs\Mathcad2000\Mathcad. At this point, the Reviver tool should display a message telling you that setup.exe was found, if so…
Click the “Fix and Run Old Installer” button
Read and understand all the prompts that appear, then continue by clicking OK.
Now, I know it’s unheard of these days, but at this point expect to wait up to 45 minutes for your full Mathcad 2000 setup.exe program to appear….
Be patient, grab lunch maybe… 🙂
Once the Mathcad 2000 Professional setup application finally displays all in Blue stop and read the next step…
In the setup program click through setup as normal, except when you get to the path for the installation – make sure you update the entry from c:\…\Mathcad 2000 Professional to c:\Mathcad2000
Now carry on with the install
Do not reboot if prompted to do so
Note, we did not Register when testing this install
Once Mathcad 2000 Professional is installed
Be sure to fully quit the setup
go back to the Reviver tool
select the 2nd tab named “Old Program Reviver”
Using the ‘…’ button, pick the newly installed c:\Mathcad2000 folder
click “Fix Old Program”
Say “Yes” if the Reviver tool asks if you want to re-register…
Now you can happily run your Mathcad 2000 Professional on Windows 7, Windows 8 or Windows 10
MathCAD 2000 Pro Update
There is an update for MathCAD Pro 2000, here’s how to install it
using the ‘…’ button, select folder c:\InstallCDs\MathCAD2000sp. At this point, the Reviver tool should display a message telling you that setup.exe was found, if so…
Click the “Fix and Run Old Installer” button
Read and understand all the prompts that appear, then continue by clicking OK.
Wait up to 45 minutes for your full Mathcad 2000 setup.exe program to appear, then install as normal
I just joined the Longbow Software team as a Software Engineer, and I have gladly offered to post some informative blogs for you all to read. Check on the left there, for all my blog entries...
Hello, just purchased SW to install Mathcad. Having proceeded as per the instructions, I get the message that this SW is AutoCAD and needs the Longbow Converter tool.
But the files are definitely from my original Mathcad 200 Pro CD. Naturally, on this CD is also a AutoCAD Viewer. But I have deleted all other folder files than Mathcad. Please advise me what to do. Thank you.
Simonbooth, thank you for the link. Waiting für their comments!
BR Tom
I just purchased your software, and I have tried to install MathCad 2000 Professional three times. I get as far as the Mathcad 2000 install screen, and then nothing. The message on the Longbow window alternates between "Your setup is starting up, please wait...." and "Waiting for your installation to finish..."
What gives...besides me buying your software?!
If the setup doesn't start, try rebooting your Windows into Safe Mode then try the steps above again.
This works great- Loaded Mathcad2000 without any issues - I also have the Mathcad 2000 treasure CD that loads separately just follow the same directions except copy CD to InstallCDs\MC2000Treasurey and when the install comes up select to install on Hard disk and it will copy all the files to the hard disk and automatically put them on the C:\Mathcad2000 directory under HANDBOOK.
Calls directory from Mathcad2000 under help pulldown.
Thanks for this program.
I am customer of Longbowsoftware since 2017. The reviver app has helped me to re-install older Windows programs such as MathCAD2000, Photpshop 6, Corel Printhouse and others. 2019, when re-installing a new Windows 10 version 1903 on my PC, Longbowsoftware staff was very helpful in providing the latest version of reviver app to me free and it worked just fine!! This year I purchased a new machine for my wife which is now Windows 10 version 2004. There were several issues with new programs to install on this Windows version.
After contacting Longbowsoftware this February 2021 again, they sent me the newest reviver app once mor for free. Installing Photoshop 6 ended in a problem that the program installed but aborted on runing with an error message. A service call from a Longbowsoftware technician via Teamviewer solved the problem. On this Windows 10 version 2004 Photoshop 6 runs only in Windows 98 mode. Thats fine for me. Thanks to the great help of Longbowsoftware!! This reviver ist the only product on the market that really solves installing problems of older programms under new Windows 10.
View Comments
Hello, just purchased SW to install Mathcad. Having proceeded as per the instructions, I get the message that this SW is AutoCAD and needs the Longbow Converter tool.
But the files are definitely from my original Mathcad 200 Pro CD. Naturally, on this CD is also a AutoCAD Viewer. But I have deleted all other folder files than Mathcad. Please advise me what to do. Thank you.
Can you contact Longbow SOftware Support directly please? They can help you with this - https://shop.longbowsoftware.com/contact-send.sc
Simonbooth, thank you for the link. Waiting für their comments!
BR Tom
I just purchased your software, and I have tried to install MathCad 2000 Professional three times. I get as far as the Mathcad 2000 install screen, and then nothing. The message on the Longbow window alternates between "Your setup is starting up, please wait...." and "Waiting for your installation to finish..."
What gives...besides me buying your software?!
If the setup doesn't start, try rebooting your Windows into Safe Mode then try the steps above again.
This works great- Loaded Mathcad2000 without any issues - I also have the Mathcad 2000 treasure CD that loads separately just follow the same directions except copy CD to InstallCDs\MC2000Treasurey and when the install comes up select to install on Hard disk and it will copy all the files to the hard disk and automatically put them on the C:\Mathcad2000 directory under HANDBOOK.
Calls directory from Mathcad2000 under help pulldown.
Thanks for this program.
I am customer of Longbowsoftware since 2017. The reviver app has helped me to re-install older Windows programs such as MathCAD2000, Photpshop 6, Corel Printhouse and others. 2019, when re-installing a new Windows 10 version 1903 on my PC, Longbowsoftware staff was very helpful in providing the latest version of reviver app to me free and it worked just fine!! This year I purchased a new machine for my wife which is now Windows 10 version 2004. There were several issues with new programs to install on this Windows version.
After contacting Longbowsoftware this February 2021 again, they sent me the newest reviver app once mor for free. Installing Photoshop 6 ended in a problem that the program installed but aborted on runing with an error message. A service call from a Longbowsoftware technician via Teamviewer solved the problem. On this Windows 10 version 2004 Photoshop 6 runs only in Windows 98 mode. Thats fine for me. Thanks to the great help of Longbowsoftware!! This reviver ist the only product on the market that really solves installing problems of older programms under new Windows 10.