Are you a software developer who wants the best way to reduce anxiety after a stressful day at work? Consider CBD gummies for anxiety. Observer has a list of the best CBD gummies for those interested.

Install 32bit AutoCAD 2018 on Windows 11

Posted on August 27, 2024 by simonbooth

These instructions solve issues around installing/running your 32bit AutoCAD 2018 on 64bit Windows 11. Some common issues are error messages like these

“This operating system is not supported by AutoCAD® 2018”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® 2018. It cannot be installed on 64-bit Windows”

You can solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2018 installation so that you can be up and running again… Follow these instructions:

Ransomware Protection Windows 11 and AutoCAD

Just before we start note that Windows 11 comes with a Ransomware Protection which includes Controlled Folder Access. Controlled folder access blocks applications from writing to your Documents, Pictures, Videos, Music, Public and Favorites folders. AutoCAD versions all the way to AutoCAD 2021 write to certain user Public folders and are therefore blocked by this feature. This can cause issues with all sorts of things including activating your AutoCAD license and even running AutoCAD. Ransomware Protection is an important feature of Windows 11 but it will affect your AutoCAD unless you allow AutoCAD and its dependent applications access to the controlled folders.

How to install AutoCAD LT 2018

If you don’t yet have a copy of the Longbow Converter App you can purchase it here or click on the download link we sent you via email in order to download the Converter App to your PC.
Before installing the Converter App, make sure the files downloaded from our site are not blocked by Windows SmartScreen… Windows 11 is finicky, click the TLC zip first to make sure it’s fully selected then Right+click the file and select Properties. Be sure to check the Unblock checkbox as shown below and Click OK…
Double click the zip file to open it and install the TLC application as normal. By the way, TLC stands for The Longbow Converter
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Back in the Converter app and make sure it has completed the final stage of processing using the “Old AutoCAD Program Reviver” tab – it should be green stating “SUCCESS”
Now run your AutoCAD as normal

Troubleshooting

If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD 2019 on Windows 11

Posted on January 27, 2024 by simonbooth

These instructions solve issues around installing/running your 32bit AutoCAD 2019 on 64bit Windows 11. Some common issues are error messages like these

“This operating system is not supported by AutoCAD® 2019”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® 2019. It cannot be installed on 64-bit Windows”

You can solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2019 installation so that you can be up and running again… Follow these instructions:

Ransomware Protection Windows 11 and AutoCAD

How to install AutoCAD LT 2019

If you don’t yet have a copy of the Longbow Converter App you can purchase it here or click on the download link we sent you via email in order to download the Converter App to your PC.
Before installing the Converter App, make sure the files downloaded from our site are not blocked by Windows SmartScreen… Windows 11 is finicky, click the TLC zip first to make sure it’s fully selected then Right+click the file and select Properties. Be sure to check the Unblock checkbox as shown below and Click OK…
Double click the zip file to open it and install the TLC application as normal. By the way, TLC stands for The Longbow Converter
Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Back in the Converter app and make sure it has completed the final stage of processing using the “Old AutoCAD Program Reviver” tab – it should be green stating “SUCCESS”
Now run your AutoCAD as normal

Troubleshooting

If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD Electrical 2012 on Windows 7, Windows 8 and Windows 10

Posted on October 16, 2019 by simonbooth

These instructions solve issues around installing/running your old AutoCAD Electrical 2012 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these

“This operating system is not supported by AutoCAD® Electrical 2012”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Electrical 2012. It cannot be installed on 64-bit Windows”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD Electrical 2012 installation so that you can be up and running again… Follow these instructions:

How to install AutoCAD Electrical 2012

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, then…
  1. Close the setup program when the installation is complete.
  2. Now switch back in the Converter App and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

Installing AutoCAD Electrical 2012 Service Packs

We recommend that you download and install the latest Service Packs from Autodesk which can be found here

AutoCAD Electrical 32bit 2012 sp1 – install as normal
Install the 2012 Ribbon Hotfix – install as normal

Troubleshooting

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD 2019 on Windows 7, Windows 8 and Windows 10

Posted on July 11, 2019 by simonbooth

These instructions solve issues around installing/running 32bit AutoCAD 2019 on 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

“This operating system is not supported by AutoCAD® 2019”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® 2019. It cannot be installed on 64-bit Windows”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2019 installation so that you can be up and running again… Follow these instructions:

How to install AutoCAD 2019

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow the instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Do not reboot if prompted to do so.
  3. Back in the Converter app and make sure it has completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

Troubleshooting

No issues at this time

Install 32bit AutoCAD 2018 on Windows 7, Windows 8 and Windows 10

Posted on July 11, 2019 by simonbooth

These instructions solve issues around installing/running 32bit AutoCAD 2018 on 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

“This operating system is not supported by AutoCAD® 2018”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® 2018. It cannot be installed on 64-bit Windows”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2018 installation so that you can be up and running again… Follow these instructions:

How to install AutoCAD 2018

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow the instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Do not reboot if prompted to do so.
  3. Back in the Converter app and make sure it has completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

Troubleshooting

No issues at this time

Installing 32bit AutoCAD Mechanical 2010 on Windows 7, Windows 8 and Windows 10 64bit

Posted on January 12, 2018 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD Mechanical® 2010”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD Mechanical® 2010. It cannot be installed on 64-bit Windows”

Installing AutoCAD Mechanical 2010 (MDT 2010) 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Insert your AutoCAD MDT 2010 CD into your CDRom drive, cancel setup if it starts
2. Next, start the Converter App
3. Select the 1st tab in the Converter tool named “32bit AutoCAD Installer Converter“
4. Using the “…” button pick the path to your AutoCAD MDT 2013 CD
5. Now click the “Convert” button and follow the instructions.
6. (Skip to step 4)
If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Mech_2010_English_Win_32bit.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\MDT2010), now click OK.
2. Wait until all of the files have extracted, when they do, the AutoCAD MDT 2013 setup will automatically launch – simply close it and move to the next step.
3. Now, start the Longbow Converter tool
4. select the 1st tab titled “AutoCAD 32bit Installer Converter“
5. pick the c:\Autodesk\MDT2010 folder
6. and click the “Convert…” button.
Once the conversion process is complete, click the “Install/Run Setup” button to start setup.
1. Install as normal!
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter
1. select the 3rd tab named “Old AutoCAD Program Reviver“
2. pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Mechanical 2010 folder
3. then click “Fix Old Program”
Now you can happily run your AutoCAD MDT 2010 32bit on Windows 7, Windows 8 and Windows 10!

Installing AutoCAD MDT 2010 Service Pack 2

Here’s sp2 – AutoCAD Mechanical 2010 sp2 – install as normal

Troubleshooting:

If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
If your AutoCAD crashes while interacting with the Ribbon click here
If you are unable to activate your product, or the activation process crashes:
1. Try uninstalling the July 2014 Microsoft security update
2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
If your Windows hangs on startup after installing please refer to this help blog

Installing 32bit AutoCAD Mechanical 2009 on Windows 7, Windows 8 and Windows 10 64bit

Posted on October 17, 2017 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD Mechanical® 2009”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD Mechanical® 2009. It cannot be installed on 64-bit Windows”

Installing AutoCAD Mechanical 2009 (MDT 2009) 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Insert your AutoCAD MDT 2009 CD into your CDRom drive, cancel setup if it starts
2. Next, start the Converter App
3. Select the 1st tab in the Converter tool named “32bit AutoCAD Installer Converter“
4. Using the “…” button pick the path to your AutoCAD MDT 2013 CD
5. Now click the “Convert” button and follow the instructions.
6. (Skip to step 4)
If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Mech_2009_English_Win_32bit.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\MDT2009), now click OK.
2. Wait until all of the files have extracted, when they do, the AutoCAD MDT 2013 setup will automatically launch – simply close it and move to the next step.
3. Now, start the Longbow Converter tool
4. select the 1st tab titled “AutoCAD 32bit Installer Converter“
5. pick the c:\Autodesk\MDT2009 folder
6. and click the “Convert…” button.
Once the conversion process is complete, click the “Install/Run Setup” button to start setup.
1. Install as normal!
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter
1. select the 3rd tab named “Old AutoCAD Program Reviver“
2. pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Mechanical 2009 folder
3. then click “Fix Old Program”
Now you can happily run your AutoCAD MDT 2009 32bit on Windows 7, Windows 8 and Windows 10!

Installing AutoCAD MDT 2009 Service Pack 3

Here’s sp3 – AutoCAD Mechanical 2009 sp3 – install as normal

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Run Adobe Acrobat X plugin in 32bit AutoCAD on Windows 7, Windows 8 and Windows 10 64bit

Posted on September 11, 2017 by simonbooth

The Adobe Acrobat X plugin for AutoCAD only runs on 32bit AutoCAD, and 32bit AutoCAD only runs on 32bit Windows. This means that you will be stuck if you require the Adobe Acrobat X plugin for AutoCAD and move to newer hardware with 64bit Windows.

The Solution:

Click on one of the links below to see how to install 32bit AutoCAD on 64bit Windows and then be able to install Adobe Acrobat X plugin.

Installing 32bit AutoCAD Architecture 2013 on Windows 7, Windows 8 and Windows 10

Posted on April 20, 2017 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Architecture® 2013”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Architecture® 2013. It cannot be installed on 64-bit Windows”

Installing AutoCAD Architecture 2013 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Make sure all previous installed versions of AutoCAD 2013 are uninstalled first.
Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, backup/copy Disk 1 of your ADT 2013 CD to your hard drive, to a folder path c:\Autodesk\ADT2013
2. If you have more CD’s, backup/copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\ADT2013 folder
If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Arch_2013_English_Win_32bit.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\ADT2013), now click OK. Wait until all of the files have extracted, when they do, the ADT 2013 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool
1. select the 1st tab titled “AutoCAD 32bit Installer Converter“
2. pick the c:\Autodesk\ADT2013 folder
3. and click the “Convert…” button..
  1. Simply install as normal.Once the conversion process is complete, click the “Install/Run Setup” button to start setup.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter
1. select the 3rd tab named “Old AutoCAD Program Reviver“
2. pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Architecture 2013 folder
3. then click “Fix Old Program”
Now you can happily run your AutoCAD Architecture 2013 32bit on Windows 7, Windows 8 and Windows 10!

Installing ADT 2013 Service Packs

There are 2 sp’s for AutoCAD Architecture 2013, these are the the 32bit versions of the sp’s

Here’s sp1 – AutoCAD Architecture 2013 sp1 – install as normal
Here’s sp2 – AutoCAD Architecture 2013 sp2 – install as normal

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD 2013 on Windows 7, Windows 8 and Windows 10

Posted on November 3, 2016 by simonbooth

These instructions solve issues around installing/running your old AutoCAD 2013 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

“This operating system is not supported by AutoCAD® 2013”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® 2013. It cannot be installed on 64-bit Windows”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2013 installation so that you can be up and running again… Follow these instructions:

How to install AutoCAD 2013

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

Installing AutoCAD 2013 Service Packs

There are 2 sp’s for AutoCAD 2013, these are the the 32bit versions of the sp’s

Here’s sp1 –AutoCAD 2013 sp1 – install as normal
Here’s sp2 – AutoCAD 2013 sp2 – install as normal

Troubleshooting

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD Architecture 2014 on Windows 7, Windows 8 and Windows 10

Posted on October 30, 2016 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Architecture® 2014”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Architecture® 2014. It cannot be installed on 64-bit Windows”

Installing AutoCAD Architecture 2014 (ADT 2014) 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Architecture 2014 CD to your hard drive, to a folder path c:\Autodesk\ADT2014
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\ADT2014 folder
If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Arch_2014_English_Win_32_64bit_en-us_Setup.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\ADT2014), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD Architecture 2014 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\ADT2014 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
1. Once installed, we recommend you disable the AutoCAD Communication Center/InfoCenter toolbar as it uses a lot of memory, causes slow startup and most people don’t use it anyway!
Now you can happily run your AutoCAD Architecture 2014 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10!

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

Try uninstalling the July 2014 Microsoft security update

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD LT 2014 on Windows 7, Windows 8 and Windows 10

Posted on October 10, 2016 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD LT®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD LT® 2014. It cannot be installed on 64-bit Windows”

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Installing AutoCAD LT 2014 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD LT 2014 CD to your hard drive, to a folder path c:\Autodesk\AutoCADLT2014
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADLT2014 folder
If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_LT_2014_English_Win_32bit.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\AutoCADLT2014), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD LT 2014 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab named ‘AutoCAD 32bit Installer Converter‘
1. pick the c:\Autodesk\AutoCADLT2014 folder
2. click the ‘Convert‘ button.
Once the conversion process is complete
1. Click ‘Install/Run Setup‘ to start setup
2. Install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete…
1. go back to the Converter, select the 3rd tab named ‘Old AutoCAD Program Reviver‘
2. Pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD LT 2014 folder
3. Click ‘Fix Old Program‘.
Now you can happily run your AutoCAD LT 2014 32bit on Windows 7, Windows 8 and Windows 10!

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD Electrical 2010 on Windows 7, Windows 8 and Windows 10

Posted on October 10, 2016 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Electrical® 2010”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Electrical® 2010. It cannot be installed on 64-bit Windows”

…Also, hung “Merging content…” message while installing…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Installing 32bit AutoCAD Electrical 2010 on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps.

First of all, you need V9.20 of the Longbow Converter (or newer) – obtain the latest version of the Longbow Converter here
If you have CDs (if not skip to step 3 below) you must copy ALL CDs to your hard drive using the following instructions…
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Electrical 2010 CD to your hard drive, to a folder path c:\Autodesk\AutoCADE2010
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADE2010 folder
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder name created for later use (we’ll refer to it from here as c:\Autodesk\AutoCADE2010), now click OK.
2. Wait until all of the files have extracted, when they do, the AutoCAD Electrical 2010 setup will automatically launch – simply close it and move to the next step.
Next start the Longbow Converter tool (V9.20 or newer)
1. select the 1st tab named “AutoCAD 32bit Installer Converter“
2. Pick the c:\Autodesk\AutoCADE2010 folder (where you copied the CDs to)
3. then click the “Convert…“ button
Once the conversion process is complete
1. click Install/Run Setup to start setup.
2. Install as normal, EXCEPT – you must install to “c:\AcadE2010” (<<< the exact text, anything else will fail!) instead of c:\Program Files (x86)\AutoCAD Electrical.
3. NOTE: Be sure to download any updates that the setup offers you.
Windows 8 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\Acade 2010 folder, then click Fix Old Program
Now you can happily run your AutoCAD 2010 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10.

Troubleshooting:

If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
If your AutoCAD crashes while interacting with the Ribbon click here
If you are unable to activate your product, or the activation process crashes:
1. Try uninstalling the July 2014 Microsoft security update
2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
If your Windows hangs on startup after installing please refer to this help blog

Install 32bit AutoCAD Electrical 2008 on Windows 7, Windows 8 and Windows 10

Posted on February 25, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Electrical® 2008”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Electrical® 2008. It cannot be installed on 64-bit Windows”

…Also, hung “Merging content…” message while installing…

Installing 32bit AutoCAD Electrical 2008 on Windows 7, Windows 8, Windows 8.1 and Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

First of all, you need V7.37 of the Longbow Converter (or newer) – obtain the latest version of the Longbow Converter here
If you have CDs (if not skip to step 3 below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Electrical 2008 CD to your hard drive, to a folder path c:\Autodesk\AutoCADE2008
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADE2008 folder
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder name created for later use (we’ll refer to it from here as c:\Autodesk\AutoCADE2008), now click OK.
2. Wait until all of the files have extracted, when they do, the AutoCAD Electrical 2008 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool (V7.37 or newer), select the 1st tab, pick the c:\Autodesk\AutoCADE2008 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\Acade 2008 folder, then click Fix Old Program
Now you can happily run your AutoCAD 2008 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD Electrical 2009 on Windows 7, Windows 8 and Windows 10

Posted on February 20, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Electrical® 2009”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Electrical® 2009. It cannot be installed on 64-bit Windows”

…Also, hung “Merging content…” message while installing…

Installing 32bit AutoCAD Electrical 2009 on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

First of all, you need V9.20 of the Longbow Converter (or newer) – obtain the latest version of the Longbow Converter here
If you have CDs (if not skip to step 3 below) you must copy ALL CDs to your hard drive using the following instructions…
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Electrical 2009 CD to your hard drive, to a folder path c:\Autodesk\AutoCADE2009
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADE2009 folder
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder name created for later use (we’ll refer to it from here as c:\Autodesk\AutoCADE2009), now click OK.
2. Wait until all of the files have extracted, when they do, the AutoCAD Electrical 2009 setup will automatically launch – simply close it and move to the next step.
Next start the Longbow Converter tool (V9.20 or newer)
1. select the 1st tab named “AutoCAD 32bit Installer Converter“
2. Pick the c:\Autodesk\AutoCADE2009 folder (where you copied the CDs to)
3. then click the “Convert…“ button
Once the conversion process is complete
1. click Install/Run Setup to start setup.
2. Install as normal, EXCEPT – you must install to “c:\AcadE2009” (<<< the exact text, anything else will fail!) instead of c:\Program Files (x86)\AutoCAD Electrical.
3. NOTE: Be sure to download any updates that the setup offers you.
Windows 8 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\Acade 2009 folder, then click Fix Old Program
Now you can happily run your AutoCAD 2009 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10.

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD 2015 on Windows 7, Windows 8 and Windows 10

Posted on September 29, 2014 by simonbooth

These instructions solve issues around installing/running your old AutoCAD 2015 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

“This operating system is not supported by AutoCAD® 2015”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® 2015. It cannot be installed on 64-bit Windows”

How to install AutoCAD 2015

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

Troubleshooting

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing AutoCAD 2010 32bit on Windows 7, Windows 8 and Windows 10

Posted on September 29, 2014 by simonbooth

These instructions solve issues around installing/running your old AutoCAD 2010 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

“This operating system is not supported by AutoCAD 2010”

“Checking License…”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2010 installation so that you can be up and running again… Follow these instructions:

How to install AutoCAD 2010

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

Installing AutoCAD 2010 Service Packs

AutoCAD 2010 has 2 service packs, instead of calling them sp1 and sp2 they decided to call them Update1 and Update2. You only need to install Update2 because it already includes Update1.

Download the AutoCAD 2010 Update 2 (sp2)
Unzip and simply run the autocad2010update2.exe to install the update

Troubleshooting

If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
If your AutoCAD crashes while interacting with the Ribbon click here
If you are unable to activate your product, or the activation process crashes:
1. Try uninstalling the July 2014 Microsoft security update
2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
If your Windows hangs on startup after installing please refer to this help blog

by Simon Booth

Ransomware Protection Windows 11 and AutoCAD

How to install AutoCAD LT 2018

Troubleshooting

Ransomware Protection Windows 11 and AutoCAD

How to install AutoCAD LT 2019

Troubleshooting

How to install AutoCAD Electrical 2012

Installing AutoCAD Electrical 2012 Service Packs

Troubleshooting

How to install AutoCAD 2019

Troubleshooting

How to install AutoCAD 2018

Troubleshooting

How to install AutoCAD 2013

Installing AutoCAD 2013 Service Packs

Troubleshooting

How to install AutoCAD 2015

Troubleshooting

How to install AutoCAD 2010

Installing AutoCAD 2010 Service Packs

Troubleshooting