Authorization/Activation problems with AutoCAD 2006 and AutoCAD 2007

After you activate and then restart your Autodesk 2006 or 2007 product, you receive error 0.1.0011 or 11.1.6011 and are required to reactivate.

This problem can occur for Autodesk’s 2006/2007-based products on computers with SATA Raid controllers.

Note: This update must be applied to all computers that share a license. Therefore, if you apply this update to one computer and then want to use the Portable License Utility to transfer the license to another computer, be sure to install the update on that computer, too.

If this update is applied to a computer that does not have a SATA Raid controller, the license on that computer will be broken. You will need to reactivate the product to repair the license.

Affected Products

  • AutoCAD 2006/2007
  • AutoCAD Electrical 2006/2007
  • AutoCAD LT 2006/2007
  • AutoCAD Mechanical 2006/2007
  • Autodesk 3ds Max 8/9
  • Autodesk Architectural Desktop 2006/2007
  • Autodesk Building Systems 2006/2007
  • Autodesk Civil 3D 2006/2007
  • Autodesk Inventor Professional 10/11
  • Autodesk Inventor Series 10/11
  • Autodesk Land Desktop 2006/2007
  • Autodesk Map 3D 2006/2007
  • Autodesk Raster Design 2006/2007
  • Autodesk AutoCAD Revit Series 8.0 / Autodesk Revit Building 8.0
  • Autodesk AutoCAD Revit Series 8.1 / Autodesk Revit Building 8.1
  • Autodesk Revit Structure 1.0
  • Autodesk Survey 2006/2007
  • Autodesk Utility Design 2006/2007
  • Autodesk Viz 2006/2007

Installation Instructions

Autodesk 2006 products

  1. Close all applications and log in as Administrator.
  2. Download the AdskBindHotfix.zip file to a location on your local computer.
  3. On your local computer, unzip the AdskBindHotfix.zip and double-click the AdskBindHotfix.exe inside.

    A message will indicate when your product(s) have been successfully updated.

Autodesk 2007 products

  1. Close all applications and log in as Administrator.
  2. Download the BindHotfix_2007.zip file to a location on your local computer.
  3. On your local computer, unzip the BindHotfix_2007.zip and double click both of the .reg files within.
    1. Click Yes when prompted, “Are you sure you want to add this information…” for both .reg files.

 

Copyright 2015 (c) Longbow Software

Leave a Reply

Your email address will not be published. Required fields are marked *