Installing 64bit AutoCAD 2015 on Windows 10 64bit

Your 64bit AutoCAD 2015 was never designed to run in Windows 10 (this version of Windows is newer than AutoCAD 2015). In order for your AutoCAD 2015 to run as it did in previous versions of Windows, you need to follow these easy steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter
    2. Using your mouse, right click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter
    3. Next, using the “…” button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  3. Once you have completed the AutoCAD installation process…
    1. close the setup program then start the Converter software
    2. Select the 3rd tab “Old AutoCAD Program Reviver
      1. Using the “…” button, pick the newly installed C:\Program Files\Autodesk\AutoCAD 2015 folder
      2. then click “Fix Old Program
  4. Now you can happily run your AutoCAD 2015 64bit on Windows 10 (even on Windows 10 Creators Update 1703)

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2017 (c) Longbow Software

Installing 64bit AutoCAD 2014 on Windows 10 64bit

Your 64bit AutoCAD 2014 was never designed to run in Windows 10 (this version of Windows is newer than AutoCAD 2014). In order for your AutoCAD 2014 to run as it did in previous versions of Windows, you need to follow these easy steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter
    2. Using your mouse, right click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter
    3. Next, using the “…” button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  3. Once you have completed the AutoCAD installation process…
    1. close the setup program then start the Converter software
    2. Select the 3rd tab “Old AutoCAD Program Reviver
      1. Using the “…” button, pick the newly installed C:\Program Files\Autodesk\AutoCAD 2014 folder
      2. then click “Fix Old Program
  4. Now you can happily run your AutoCAD 2014 64bit on Windows 10 (even on Windows 10 Creators Update 1703)

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2017 (c) Longbow Software

Making the Calcomp Digitizer work in old versions of AutoCAD

Some users have experienced issues where their Calcomp Digitizer works just fine in new versions of AutoCAD (like AutoCAD 2009, but doesn’t work on older versions of AutoCAD (like AutoCAD 2000) even though both versions are installed on the same computer.

We have reports that simply disabling the Windows User Access Control  (UAC) seems to fix this issue!

Before you disable UAC – read all about UAC here

Click here to Disable UAC

Copyright 2017 (c) Longbow Software

 

Visual Basic Applications run very slow in AutoCAD 64bit

If you use VBA inside of 32bit AutoCAD you will have noticed that it is around 1000x times slower when running the same VBA code inside of 64bit AutoCAD.

This is because AutoCAD 64bit ships with the 32bit VBA DLL in a separate out-of-process executable rather than loading the VBA DLL inside of AutoCAD itself. Therefore, a lot of marshaling is incurred communicating between the out-of-process VBA executable and 64bit AutoCAD.

Other issues you may be seeing: Run-time error ‘429’: ActiveX component can’t create object

The Solution:

The best solution is to install 32bit AutoCAD on 64bit Windows, here are the affected versions along with their solution text…

Copyright 2017 (c) Longbow Software

Run Adobe Acrobat X plugin in 32bit AutoCAD on Windows 7, Windows 8 and Windows 10 64bit

The Adobe Acrobat X plugin for AutoCAD only runs on 32bit AutoCAD, and 32bit AutoCAD only runs on 32bit Windows. This means that you will be stuck if you require the Adobe Acrobat X plugin for AutoCAD and move to newer hardware with 64bit Windows.

The Solution:  

Click on one of the links below to see how to install 32bit AutoCAD on 64bit Windows and then be able to install Adobe Acrobat X plugin.

Copyright 2017 (c) Longbow Software