Installing AutoCAD Mechanical Desktop 5 on Windows 7, Windows 8 and Windows 10

Installing AutoCAD Mechanical Desktop 5 (MDT R5) on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

I recommend that you follow these steps precisely so to eliminate the risk of something going wrong with the install…
  1. Obtain your copy of the Longbow Converter here
  2. Insert your MDT 5 CD into your computer
  3. Start the Longbow Converter tool
    1. Select the 2nd tab named “Old AutoCAD Installer Reviver”
    2. Using the “..” button, pick your MDT 5 CD, and click Run and follow the Converter’s instructions.
    3. Once the MDT 5 setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\mdt2000i (not Program Files (x86)\Mechanical Desktop 5 as usually prompted by default)**
  5. Once installed, go back to the Converter tool
    1. select the 3rd tab named “Old AutoCAD Program Reviver”
    2. pick the newly installed c:\mdt2000i folder and click Fix.
  6. Now, you can happily run your MDT 5 on Windows 10, Windows 7 and Windows 8.
Troubleshooting:
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
Copyright 2017 (c) Longbow Software

Installing 64bit AutoCAD Architecture 2014 on Windows 10 64bit

Your 64bit AutoCAD Architecture 2014 (ADT 2014) was never designed to run in Windows 10 (this version of Windows is newer than AutoCAD 2014). In order for your AutoCAD Architecture 2014 to run as it did in previous versions of Windows, you need to follow these easy steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Make sure all previous installed versions of AutoCAD 2014 are uninstalled first.
  2. Obtain your copy of the Longbow Converter here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter
    2. Using your mouse, right click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter
    3. Next, using the “…” button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once you have completed the AutoCAD installation process…
    1. close the setup program then start the Converter software
    2. Select the 3rd tab “Old AutoCAD Program Reviver
      1. Using the “…” button, pick the newly installed C:\Program Files\Autodesk\AutoCAD Architecture 2014 folder
      2. then click “Fix Old Program
  5. Next install the AutoCAD Architecture 2014 sp1 from here
  6. Now you can happily run your AutoCAD Architecture 2014 64bit on Windows 10

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2017 (c) Longbow Software