Tag Archives: Inventor Series 2008

Installing AutoCAD Mechanical 2008 from Inventor Series 2008 CD on Windows 10, Windows 7, Windows 8 and Windows 8.1

Posted on by

NOTE: This solution only works with an Autodesk Inventor Series 2008 installation media.

Installing Mechanical 2008 from Inventor Series 2008 CD on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…
NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.
  1. Obtain your copy of the Longbow Converter here
  2. Copy your Inventor Series 2008 CD to your hard drive, to a folder path c:\Autodesk\CDs\InventorSeries2008 
    1. IMPORTANT: If you have more than one CD, copy them all to the same c:\Autodesk\CDs\InventorSeries2008 folder – overwriting any existing files and folders.
  3. Start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\CDs\InventorSeries2008 folder.
  4. The Converter will say that the media is not fully supported; simply click the Tools->Manual MSI Correction menu option
  5. Once the conversion process is completed, click the “Run Setup/Install AutoCAD…” button to bring up your Inventor 2008 setup program as normal.
    1. Un-check all install options except AutoCAD Mechanical 2008
    2. Install as normal
  6. Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\MDT 2008 folder, then click “Fix“
  7. Now you can happily run your AutoCAD Mechanical 2008 on Windows 10, Windows 7 or Windows 8.

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs please read this blog entry on the File->Open or File->Save Crash in Autodesk Products

Copyright 2016 (c) Longbow Software