Installing Autodesk Mechanical Desktop 4 on Windows 11

Installing Autodesk Mechanical Desktop R4 on Windows 11 is not normally possible, you will run into lots of problems including the error message shown below…

Windows 16bit setup error - This app can't run on your PC

Windows 16bit setup error – This app can’t run on your PC

The following document will walk you through how to install your Autodesk Mechanical Desktop R4 (otherwise known as MDT 4 and built on the AutoCAD 2000 platform) on Windows 11 32bit or 64bit…

Ransomware Protection Windows 11 and AutoCAD

Windows 11 comes with a Ransomware Protection which includes Controlled Folder Access. Controlled folder access blocks applications from writing to your Documents, Pictures, Videos, Music, Public and Favorites folders. AutoCAD versions all the way to AutoCAD 2021 write to certain user Public folders and are therefore blocked by this feature. This can cause issues with all sorts of things including activating your AutoCAD license and even running AutoCAD. Ransomware Protection is an important feature of Windows 11 but it will affect your AutoCAD unless you allow AutoCAD and its dependent applications access to the controlled folders.

How to install AutoCAD MDT R4 (2000)

A quick word of advice: please follow the instructions below precisely as documented including using the same folder names and paths. This will significantly reduce the risk of having any problems…

  1. If you don’t yet have a copy of the Longbow Converter App you can purchase it here or click on the download link we sent you via email in order to download the Converter App to your PC.
  2. Before installing the Converter App, make sure the files downloaded from our site are not blocked by Windows SmartScreen… Windows 11 is finicky, click the TLC zip first to make sure it’s fully selected then Right+click the file and select Properties. Be sure to check the Unblock checkbox as shown below and Click OK…
  3. Double click the zip file to open it and install the TLC application as normal. By the way, TLC stands for The Longbow Converter
  4. Start the Longbow Converter tool
    1. Insert your AutoCAD CD into your CDRom drive
    2. Select the 2nd tab named “Old AutoCAD Installer Reviver
    3. Using the “…” button, pick your AutoCAD CD
    4. Click “Run Old Installer
      1. Read and follow all the prompts
      2. Once the AutoCAD setup starts, stop and read the next step…
  5. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\mdt2000 (not .\MDT as usually prompted)**

    MDT 4 select the Browse button

    MDT 4 select the Browse button and update path to c:\mdt2000   MDT 4 Select Install path to c:\mdt2000

     

  6. Now carry on with the install, please read all of the following tips while your installation is running so that you are prepared…
    1. Do not reboot once the install is complete.
    2. Ignore any errors related to not being able to create the shortcut folder “Mechanical Desktop 4”, you will have to create a shortcut on your computer Desktop pointing to your c:\mdt2000\acad.exe by hand.
    3. If you see errors stating errors with objectdbx.z or dao2535.tlb – please reboot your machine and re-do all of the steps above.
    4. Once you click “OK” to setup not being able to create your shortcut folder “Mechanical Desktop 4” – setup may now try to install Acrobat Reader 3.01. If this happens, you will see a blue Mechanical Desktop 4 screen with nothing on it, it will sit there for maybe 60 minutes, just let it do its thing and be patient. Eventually, you will see the Acrobat setup appear, install accepting all defaults.
    5. When the MDT 4 setup asks if you want to “Install the Mechanical Desktop Migration Assistant” say
  7. Once the setup has completed…
      1. Do not reboot if asked to do so
      2. Make sure to fully close the setup program when the installation is complete.
      3. Back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab and that SUCCESS!! is displayed
  8. Finally, reboot your PC.
    1. Now you are ready to run your AutoCAD, simply run c:\mdt2000\acad.exe using Windows Explorer.
  9. If you find that you are running in raw AutoCAD mode, to enable your Mechanical Desktop features, carry out these next steps, either…
    1. Add a shortcut (recommended) to c:\mdt2000\acad.exe making sure that the Target Property of the shortcut is set to (including quotes) “C:\mdt2000\acad.exe”  /p “C:\mdt2000\desktop\desktop.arg” and the Start In Property is set to the same path as the .arg file e.g.
      Creating a shortcut to Mechanical R4

      Creating a shortcut to Mechanical R4 making sure the Startin property points to where the .arg file resides

      1. For the Power Packs use a new shortcut with the Target set to either
        1. “C:\mdt2000\acad.exe”  /p “C:\mdt2000\acadm\mdtpp.arg”
        2. “C:\mdt2000\acad.exe”  /p “C:\mdt2000\acadm\acadmpp.arg”
          …with both Shortcut Start In: properties set to and the C:\mdt2000\acadm
    2. or update your AutoCAD support path by hand…
      1. At the AutoCAD Command line, type the command ‘Preferences’, add new Support path folders c:\mdt2000\acadm and then also c:\mdt2000\acadm\support, now click ‘Apply’ and then ‘OK’ out of the dialog.
      2. Next, restart AutoCAD.
      3. When you are back in AutoCAD, type ‘Menuload’ at the command line, click browse, then navigate to C:\mdt2000\acadm\support, change the file filter at the bottom to *.mnu, then open acadm.mnu, finally click Load, then pick Close.
      4. Now restart AutoCAD
  10. Now you can happily run your Autodesk Mechanical Desktop 4 – but we do recommend you install the following Service Packs…

Installing AutoCAD 2000 Service Pack 1

  1. Obtain AutoCAD 2000 sp1
  2. Unzip your newly downloaded sp to folder path c:\Autodesk\sp
  3. Start the Converter, select the 2nd tab named “Old AutoCAD Installer Reviver“,
    1. pick the c:\Autodesk\sp\AutoCAD 2000 sp1 folder and click ‘Run Old Installer
  4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal

Installing AutoCAD 2000 Service Pack 2

  1. Obtain AutoCAD 2000 sp2
  2. Unzip your newly downloaded sp to folder path c:\Autodesk\sp
  3. Start the Converter, select the 2nd tab named “Old AutoCAD Installer Reviver“,
    1. pick the c:\Autodesk\sp\AutoCAD 2000 sp2 folder and click ‘Run Old Installer
  4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal.

Installing AutoCAD 2000 Service Pack 3

  1. Obtain the AutoCAD MDT R4 sp 3
  2. Unzip your newly downloaded sp to folder path c:\Autodesk\sp
  3. Start the Converter, select the 2nd tab named “Old AutoCAD Installer Reviver“,
    1. pick the c:\Autodesk\sp\AutoCAD 2000 sp3 folder and click ‘Run Old Installer
  4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal.

Installing AutoCAD 2000 Service Pack 4a

  1. Obtain the AutoCAD MDT R4 sp 4a
  2. Unzip your newly downloaded sp to folder path c:\Autodesk\sp
  3. Start the Converter, select the 2nd tab named “Old AutoCAD Installer Reviver“,
    1. pick the c:\Autodesk\sp\AutoCAD 2000 sp4 folder and click ‘Run Old Installer
  4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal.

Troubleshooting

Copyright 2024 (c) Longbow Software

Install AutoCAD 2002 on Windows 11

Follow these instructions to solve issues around installing/running your legacy AutoCAD 2002 on Windows 11

Ransomware Protection Windows 11 and AutoCAD

Windows 11 comes with a Ransomware Protection which includes Controlled Folder Access. Controlled folder access blocks applications from writing to your Documents, Pictures, Videos, Music, Public and Favorites folders. AutoCAD versions all the way to AutoCAD 2021 write to certain user Public folders and are therefore blocked by this feature. This can cause issues with all sorts of things including activating your AutoCAD license and even running AutoCAD. Ransomware Protection is an important feature of Windows 11 but it will affect your AutoCAD unless you allow AutoCAD and its dependent applications access to the controlled folders.

How to install AutoCAD 2002

A quick word of advice: please follow the instructions below precisely as documented including using the same folder names and paths. This will significantly reduce the risk of having any problems…
  1. If you don’t yet have a copy of the Longbow Converter App you can purchase it here or click on the download link we sent you via email in order to download the Converter App to your PC.
  2. Before installing the Converter App, make sure the files downloaded from our site are not blocked by Windows SmartScreen… Windows 11 is finicky, click the TLC zip first to make sure it’s fully selected then Right+click the file and select Properties. Be sure to check the Unblock checkbox as shown below and Click OK…
  3. Double click the zip file to open it and install the TLC application as normal. By the way, TLC stands for The Longbow Converter
  4. Start the Longbow Converter tool
    1. Insert your AutoCAD 2002 CD into your CDRom drive
    2. Select the 2nd tab named “Old AutoCAD Installer Reviver
    3. Using the “…” button, pick your AutoCAD CD
    4. Click “Run Old Installer
      1. Read and follow all the prompts
      2. Once the AutoCAD setup starts, stop and read the next step…
  5. In the AutoCAD setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you arrive at the installation folder path setup dialog…
      1. **it’s vitally important to make sure you install to c:\acad2002 (not Program Files (x86)\AutoCAD  2002 which is normally default)**
      2. Once setup completes…
        1. Do not reboot if asked to do so
        2. Make sure to fully close the setup program when the installation is complete.
  6. Back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab, it should say SUCCESS!
  7. Finally, reboot your PC and run your AutoCAD and once registered, exit AutoCAD and continue to the next step.
  8. Next, obtain the AutoCAD 2002 sp1 from here unzip and save to c:\Autodesk\spdo not install yet
    1. Go back into the Converter
    2. Select the 3rd tab again
    3. titled “Old AutoCAD Program Reviver
    4. Using the ‘…’ button, select the c:\Autodesk\sp folder
    5. click “Fix Old Program
    6. Finally, install the AutoCAD 2002 sp1 by running the c:\Autodesk\sp\acad2002sp1.exe 
  9. Now, you can happily run your AutoCAD 2002 on Windows 11

Troubleshooting

  • If your AutoCAD 2002 setup stuck at very end, check out this blog
  • If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD 
Copyright 2023 (c) Longbow Software

Installing AutoCAD LT98 on Windows 11

AutoCAD LT98 users are very used to the software package and cannot do without it. With the latest hardware and required move to new Windows versions, trying to install your AutoCAD LT98 gives an error like this one…

Windows 16bit setup error - This app can't run on your PC

 

“This app can’t run on your PC”

or this one…

Setup Halted System requirements error Wrong OS, AutoCAD supports Windows NT 4.0, Windows NT 5.0, Windows 95 and Windows 98
“Wrong OS, AutoCAD supports Windows NT 4.0, Windows NT 5.0, Windows 95 and Windows 98”

 

…all is not lost, follow these instructions to install your AutoCAD LT98 on Windows 11…

Ransomware Protection Windows 11 and AutoCAD

Just before we start note that Windows 11 comes with a Ransomware Protection which includes Controlled Folder Access. Controlled folder access blocks applications from writing to your Documents, Pictures, Videos, Music, Public and Favorites folders. AutoCAD versions all the way to AutoCAD 2021 write to certain user Public folders and are therefore blocked by this feature. This can cause issues with all sorts of things including activating your AutoCAD license and even running AutoCAD. Ransomware Protection is an important feature of Windows 11 but it will affect your AutoCAD unless you allow AutoCAD and its dependent applications access to the controlled folders.

How to install AutoCAD LT 98

A quick word of advice: please follow the instructions below precisely as documented including using the same folder names and paths. This will significantly reduce the risk of having any

problems…

  1. If you don’t yet have a copy of the Longbow Converter App you can purchase it here or click on the download link we sent you via email in order to download the Converter App to your PC.
  2. Before installing the Converter App, make sure the files downloaded from our site are not blocked by Windows SmartScreen… Windows 11 is finicky, click the TLC zip first to make sure it’s fully selected then Right+click the file and select Properties. Be sure to check the Unblock checkbox as shown below and Click OK…
  1. Double click the zip file to open it and install the TLC application as normal. By the way, TLC stands for The Longbow Converter
  2. Once installed, start the Longbow Converter App…
    1. Now place your AutoCAD LT98 CD in the CDRom Drive
    2. In the Converter App, select the 2nd tab named “Old AutoCAD Installer Reviver
    3. Using the “. . .” button, select your AutoCAD LT98 installation CD
    4. Next, click the “Run Old Installer” button and follow the onscreen instructions. If all is well a dialog will appear stating success, simply click OK to start your AutoCAD setup
      1. Now I know it’s unheard of these days, but at this point expect to wait up to 45 minutes for your AutoCAD LT98 setup.exe program to appear, be patient – NOTE: do not continue with the install until reading the next step…
    1. Once the setup starts, stop and read the next steps all the way to the end! By the way, if your AutoCAD LT98 setup does not start after 45 minutes, read the Troubleshooting section below.
  3. In the AutoCAD setup program…
    1. navigate through each setup dialog as normal, with these exceptions…
      1. Make sure you do a Typical Install (not a Full Install)
      2. When you get to the installation folder input dialog **it’s vitally important to make sure you install to c:\acadlt98 (not Program Files\AutoCADLT98 as usually prompted)**
  4. Now carry on with the install
    1. Do not reboot once the install is complete
    2. Ignore any errors related to not being able to create the shortcut e.g. “Cannot Create folder ‘AutoCAD LT98’“, you will have to create a shortcut on your computer Desktop to your c:\acadlt98\acad.exe by hand.
    3. Again, do not reboot if prompted to do so
  5. Once your AutoCAD LT98 setup has completed the installation…
    1. Make sure you fully close the setup program.
    2. Once the setup is closed the Converter will automatically fix the c:\acadlt98 program files. You should see “Success!” displayed in the 3rd tab named “Old AutoCAD Program Reviver
    3. Now reboot your PC
  6. You can now run your AutoCAD LT98 as normal, using Windows Explorer, navigate to c:\acadlt98 and double click aclt.exe

Troubleshooting

  • If your AutoCAD LT98 setup is not starting after 45 minutes…
    1. First try turning off UAC, rebooting, then restart the steps above.
    2. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try installing LT98 from Windows Safe Mode
  • If you are getting either a Bad Mem Pointer error and or a Smartheap handler recursively re-entered error when you start your AutoCAD LT98 then you need to re-run all the steps above, taking care to do each step precisely as it says, most likely you are missing from step 5 or you have not installed to c:\acadlt98 as stated in step (7) above.
  • When starting AutoCAD, if you receive an ‘acad.exe – System Error’ message: The program can’t start because ac1st15.dll is missing from your computer. Try reinstalling the program to fix this problem. If you carried out step (7) above, then try rebooting your PC
  • If you are getting a WinHelp() error when pressing F1 to try and access the Help system then simply install the WinHelp (WinHlp32.exe) module from Microsoft
  • Issues with Calcomp Digitizer – Calcomp Digitizer not working
  • If the setup displays an error message InstallError (IUO)               
    (X)  not enough space(IUO) try unplugging any External USB drives
  • Plotting issues? If you get an error splwow64.exe “The application was unable to start correctly” with error “0xc0000005”
    1. Make sure your Anti-virus and/or Windows Firewall is not blocking splwow64.exe
    2. If the problem persists
      1. First, note that you need the latest version of the Converter App
      2. Start the Converter App
      3. Select the 3d tab “Old AutoCAD Program Reviver” 
      4. Click the Tools Menu->Reduced Power Mode
      5. Using the “…” button, pick your acad.exe folder e.g. c:\acadlt98
      6. Click “Fix Old Program” and follow prompts
  • If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2023 (c) Longbow Software

Installing Scansoft OmniPage 15 on Windows 10 and Windows 11

Installing your Scansoft OmniPage 15 on Windows or Windows 11 10 32bit or 64bit can be very easily defined in these short steps…

How to install OmniPage 15

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

  1. Obtain your copy of the Longbow Reviver tool here and install it – you need version V4.10 or newer
  2. Using Windows Explorer, copy your entire OmniPage 15 install CD media to your hard drive, to a folder path c:\InstallCDs\Scansoft\OmniPage15
  3. Start the Longbow Reviver tool…
    1. Select the 1st tab “Old Installer Reviver
    2. using the ‘…’ button pick the c:\InstallCDs\Scansoft\OmniPage15\OmniPage 15\OmniPage folder
    3. Now click the ‘Fix and Run Old Installer’ button
    4. Read and understand all the prompts that appear, then continue by clicking OK.
  4. Once your Omni Page 15 setup screen appears, install as normal except:
    1. As shown just below, when you arrive at the Setup Type, pick Custom then it is vitally important that you install to c:\Scansoft\OmniPage15 (not C:\Program Files (x86)\Scansoft\OmniPage 15 as normally prompted)
    2. now carry on and install as normal
    3. Do not reboot if prompted to do so
  5. Now OmniPage 15 is installed, back in the Longbow Reviver tool
    1. select the 2nd tab “Old Program Reviver
    2. pick the newly installed c:\Scansoft\OmniPage15 folder and click ‘Fix Old Program’
    3. Say ‘No’ if the Reviver tool asks if you want to re-register…
  6. Now you can happily run your OmniPage 15

Troubleshooting

  • No current troubleshooting notes.
Copyright 2022 (c) Longbow Software

Installing Scansoft PaperPort 11 Pro on Windows 10 and Windows 11

Installing your Scansoft PaperPort 11 Pro on Windows or Windows 11 10 32bit or 64bit can be very easily defined in these short steps…

How to install PaperPort 11 Pro

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

  1. Obtain your copy of the Longbow Reviver tool here and install it – you need version V4.10 or newer
  2. Using Windows Explorer, copy your entire PaperPort 11 Pro install CD media to your hard drive, to a folder path c:\InstallCDs\Scansoft\PaperPort11
  3. Start the Longbow Reviver tool…
    1. Select the 1st tab “Old Installer Reviver
    2. using the ‘…’ button pick the c:\InstallCDs\Scansoft\PaperPort11\PaperPort folder
    3. Now click the ‘Fix and Run Old Installer’ button
    4. Read and understand all the prompts that appear, then continue by clicking OK.
  4. Once your PaperPort 11 Pro setup screen appears, install as normal except:
    1. As shown just below, when you arrive at the Setup Type, pick Custom
      then it is vitally important that you install to c:\Scansoft\PaperPort11 (not C:\Program Files (x86)\Scansoft\PaperPort as normally prompted)

    2. now carry on and install as normal
    3. Do not reboot if prompted to do so
  5. Now PaperPort 11 Pro is installed, back in the Longbow Reviver tool
    1. select the 2nd tab “Old Program Reviver
    2. pick the newly installed c:\Scansoft\PaperPort11 folder and click ‘Fix Old Program’
    3. Say ‘No’ if the Reviver tool asks if you want to re-register…
  6. Now you can happily run your PaperPort 11 Pro

Troubleshooting

  • No current troubleshooting notes.
Copyright 2022 (c) Longbow Software

Installing AutoCAD LT97 on Windows 11

AutoCAD LT97 users are very used to the software package and cannot do without it. With the latest hardware and required move to new Windows versions, trying to install your AutoCAD LT97 gives an error like this one…
Windows 16bit setup error - This app can't run on your PC

“This app can’t run on your PC”

or this one…
Setup Halted System requirements error Wrong OS, AutoCAD supports Windows NT 4.0, Windows NT 5.0, Windows 95 and Windows 98
“Wrong OS, AutoCAD supports Windows NT 4.0, Windows NT 5.0, Windows 95 and Windows 98” …all is not lost, follow these instructions to install your AutoCAD LT97 on Windows 11…

Ransomware Protection Windows 11 and AutoCAD

Just before we start note that Windows 11 comes with a Ransomware Protection which includes Controlled Folder Access. Controlled folder access blocks applications from writing to your Documents, Pictures, Videos, Music, Public and Favorites folders. AutoCAD versions all the way to AutoCAD 2021 write to certain user Public folders and are therefore blocked by this feature. This can cause issues with all sorts of things including activating your AutoCAD license and even running AutoCAD. Ransomware Protection is an important feature of Windows 11 but it will affect your AutoCAD unless you allow AutoCAD and its dependent applications access to the controlled folders.

How to install AutoCAD LT97

A quick word of advice: please follow the instructions below precisely as documented including using the same folder names and paths. This will significantly reduce the risk of having any

problems…

  1. If you don’t yet have a copy of the Longbow Converter App you can purchase it here or click on the download link we sent you via email in order to download the Converter App to your PC.
  2. Before installing the Converter App, make sure the files downloaded from our site are not blocked by Windows SmartScreen… Windows 11 is finicky, click the TLC zip first to make sure it’s fully selected then Right+click the file and select Properties. Be sure to check the Unblock checkbox as shown below and Click OK…
  1. Double click the zip file to open it and install the TLC application as normal. By the way, TLC stands for The Longbow Converter
  2. Once installed, start the Longbow Converter App…
    1. Now place your AutoCAD LT97 CD in the CDRom Drive
    2. In the Converter App, select the 2nd tab named “Old AutoCAD Installer Reviver
    3. Using the “. . .” button, select your AutoCAD LT97 installation CD
    4. Next, click the “Run Old Installer” button and follow the onscreen instructions. If all is well a dialog will appear stating success, simply click OK to start your AutoCAD setup
      1. Now I know it’s unheard of these days, but at this point expect to wait up to 45 minutes for your AutoCAD LT97 setup.exe program to appear, be patient – NOTE: do not continue with the install until reading the next step…
    5. Once the setup starts, stop and read the next steps all the way to the end! By the way, if your AutoCAD LT97 setup does not start after 45 minutes, read the Troubleshooting section below.
  3. In the AutoCAD setup program…
    1. navigate through each setup dialog as normal, with these exceptions…
      1. Make sure you do a Typical Install (not a Full Install)
      2. When you get to the installation folder input dialog **it’s vitally important to make sure you install to c:\acadlt97 (not Program Files\AutoCADLT97 as usually prompted)**
  1. Now carry on with the install
    1. Do not reboot once the install is complete
    2. Ignore any errors related to not being able to create the shortcut e.g. “Cannot Create folder ‘AutoCAD LT97’, you will have to create a shortcut on your computer Desktop to your c:\acadlt97\aclt.exe by hand.
    3. Again, do not reboot if prompted to do so
  2. Once your AutoCAD setup has completed the installation…
    1. Make sure you fully close the setup program.
    2. Once the setup is closed the Converter will automatically fix the c:\acadlt97 program files. You should see “Success!” displayed in the 3rd tab named “Old AutoCAD Program Reviver
    3. Now reboot your PC
  3. You can now run your AutoCAD LT97, using Windows Explorer, navigate to c:\acadlt97 and double click aclt.exe

Troubleshooting

  • If your AutoCAD LT97 setup is not starting after 45 minutes…
    1. First try turning off UAC, rebooting, then restart the steps above.
    2. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try installing LT97 from Windows Safe Mode
  • If you are getting an application failure with Unhandled Exception 0x800F0922
    • The security software (ESET Nod 32) must uninstalled; suspending it not effective
  • If you are getting a WinHelp() error when pressing F1 to try and access the Help system then simply install the WinHelp (WinHlp32.exe) module from Microsoft
Copyright 2022 (c) Longbow Software

Installing Adobe Illustrator 10 on Windows 7, Windows 8, Windows 10

Most likely, the reason you found this page is because your Adobe Illustrator 10 Autoplay does nothing when you click the “Adobe Illustrator 10” install button…

Adobe Illustrator 10 button does nothing when clicked

Adobe Illustrator 10 button does nothing when clicked

…the good news is, that it can be solved!

Installing your Adobe Illustrator 10 on Windows 7, Windows 8 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

How to install Adobe Illustrator 10

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

  1. Obtain your copy of the Longbow Reviver tool here – you need version 4.10 or newer
  2. Using Windows Explorer, copy your entire Adobe Illustrator 10 install CD media to your hard drive, to a folder path c:\InstallCDs\Adobe\Illustrator10
  3. Start the Longbow Reviver tool, select the 1st tab “Old Installer Reviver“, then using the ‘…’ button pick the  c:\InstallCDs\Adobe\Illustrator10\Adobe Illustrator 10.0.3 folder
    1. Now click the ‘Fix and Run Old Installer’ button
    2. Read and understand all the prompts that appear, then continue by clicking OK.
  4. Once your Adobe Illustrator 10 setup screen appears, install as normal except:
    1. As shown just below, when you arrive at the install to ‘Destination Folder” – it is vitally important that you install to c:\adobe\illustrator 10 (not C:\Program Files (x86)\Adobe\Illustrator 10.0.3 as normally prompted)

      Adobe Illustrator 10 select folder

      Adobe Illustrator 10 select folder

    2. Do not reboot if prompted to do so
  5. Now Illustrator is installed. In the Longbow Reviver tool, select the 2nd tab “Old Program Reviver“, pick the newly installed c:\adobe\illustrator 10 folder and click ‘Fix Old Program’
    1. Say ‘No’ if the Reviver tool asks if you want to re-register…
  6. Now you can happily run your Adobe Illustrator 10 on Windows 7, Windows 8 or Windows 10 32bit or 64bit!

Troubleshooting

  • If your setup is not appearing within 1 hour, reboot into Safe Mode and try the same process as above again.
Copyright 2019 (c) Longbow Software

Installing AutoCAD MDT 2005 on Windows 7, Windows 8 and Windows 10

Follow these instructions to solve issues around installing/running your old AutoCAD Mechanical 2005 on Windows 7, Windows 8 and Windows 10

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

How to install MDT 2005 

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Longbow Converter tool
    1. Insert your AutoCAD CD into your CDRom drive
    2. Select the 2nd tab named “Old AutoCAD Installer Reviver
    3. Using the “…” button, path the to your AutoCAD CD
    4. Click “Run Old Installer
      1. Read and follow all the prompts
      2. Once the AutoCAD setup starts, stop and read the next step…
  3. In the AutoCAD setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you arrive at the installation folder path setup dialog…
      1. it’s vitally important to make sure you install to c:\mdt2005 (not Program Files (x86)\AutoCAD Mechanical 2005)
    2. While installing…
      1. If you see an error in install “.NET Runtime Optimization Service has stopped working” – simply ignore by clicking the “Close Program” button
      2. If a message box appears warning that “64bit .NET Unavailable” – simply click OK to carry on and install AutoCAD as normal – this does not affect anything.
      3. Do not reboot if asked to do so
    3. Once installed
      1. Do not reboot if asked to do so
      2. Make sure to fully close the setup program when the installation is complete.
      3. Switch back to the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab – it should display “SUCCESS!”
  4. Finally, reboot your PC and run your AutoCAD as normal
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues
      1. Click “Don’t show this message again
      2. then click “Run the Program…

Troubleshooting

– If you are unable to activate your product, or the activation crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD  

Copyright 2021 (c) Longbow Software

Installing AutoCAD Map 2000i on Windows 7, Windows 8 and Windows 10

AutoCAD Map 2000i users are very used to the software package and cannot do without it. With the latest hardware and required move to new Windows versions, you will inevitably run into problems either installing or running your AutoCAD again – a common fault is the error dialog stating “Runtime Error!”

How to install AutoCAD Map 2000i

  1. If you have an existing faulty Map 2000i installation, uninstall it.
  2. Next, obtain your purchased copy of the Longbow Converter here
  3. Start In the Converter App and note the user interface
  4. Insert your AutoCAD CD into your computer
  5. Start the Longbow Converter tool
    1. Select the 2nd tab named “Old AutoCAD Installer Reviver
    2. Using the “” button pick your AutoCAD CD
    3. Click “Run Old Installer” and follow the Converter’s instructions.
    4. Once the AutoCAD Map 2000i setup starts, stop and read the next step…
  6. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acad2000i (not Program Files (x86)\AutoCAD Map 2000i as usually prompted by default)**
  7. Once installed
    1. do not reboot if prompted to do so.
    2. Fully close the AutoCAD setup application
    3. Finally, let the Converter App finish processing
  8. Now, you can happily run your AutoCAD 2000i on Windows 7, Windows 8 and Windows 10!

Installing the ER Mapper Imagery Plugin for AutoCAD 2000i

If you are having problems installing the
ER Mapper Imagery Plugin for AutoCAD 2000i, try this…

  1. Start In the Converter App again\
  2. Select the 3rd tab named “Old AutoCAD Program Reviver
    1. Using the “…” button pick the folder where your ACAD2000_ECW_Plugin exe is
    2. Now hit “Fix Old Program
    3. Once the Converter app is complete, run the
      ACAD2000_ECW_Plugin exe as normal

Troubleshooting  

Copyright 2019 (c) Longbow Software

Installing old versions of AutoCAD on Windows 7, Windows 8 and Windows 10

Old versions of AutoCAD were not designed to run in newer versions of Windows and you will find that installing them as you always did before will encounter lots of issues, even failing while installing too.

The Longbow Converter app allows old versions of AutoCAD to be installed on new versions of Windows, removing all known compatibility issues automatically for you.

Instructions for installing old versions of AutoCAD on Windows 7, Windows 8 and Windows 10

Versions
  • AutoCAD 2008 | AutoCAD 2009 | AutoCAD 2010 | AutoCAD 2011 | AutoCAD 2012 | AutoCAD 2013
  • AutoCAD 2014 | AutoCAD 2015 | AutoCAD 2016 | AutoCAD 2017
  • AutoCAD 2018 | AutoCAD 2019
  • 32bit or 64bit

  1. Make sure all previous installed versions of AutoCAD are uninstalled first.
  2. Obtain your copy of the Longbow Converter here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter
    2. If your AutoCAD is 64bit
      1. Using your mouse, right click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter
    3. Next, using the “…” button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface
  4. Once you have completed the AutoCAD installation process…
    1. Fully close the setup program
    2. Now go back to the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
    3. Finally, reboot your PC and run your AutoCAD as normal
  5. Install any service packs for your AutoCAD
  6. Now you can happily run your AutoCAD on Windows 7, Windows 8 and Windows 10

Troubleshooting

 

Copyright 2019 (c) Longbow Software

Installing WordPerfect 6 on Windows 7, Windows 8 and Windows 10

If you are having problems installing your WordPerfect 6 on your new PC, like you are unable to run the setup.exe as shown below, then read on…

Windows 16bit setup error - This app can't run on your PC

Windows 16bit setup error – This app can’t run on your PC

Unfortunately, WordPerfect 6 is a pure 16bit application which means that it cannot be run on 64bit Windows 7, Windows 8 or Windows 10.

However, it can only run on *32bit* Windows 7, Windows 8 or Windows 10 using the Longbow Reviver app.

Install Word Perfect 6 on Windows

  1. Obtain your copy of the Longbow Reviver tool here – you need version 4.10 or newer
  2. Using Windows Explorer, copy your entire WordPerfect 6 install CD media to your hard drive, to a folder path c:\InstallCDs\WordPerfect6
  3. Start the Longbow Reviver tool
    1. select the 1st tab named “Old Installer Reviver
    2. then using the ‘…’ button pick the  c:\InstallCDs\WordPerfect6\INSTPROG folder
    3. Now click the ‘Fix and Run Old Installer’ button
    4. Read and understand all the prompts that appear, then continue by clicking OK.
    5. Install as normal
    6. Close setup – Do not reboot if prompted to do so
  4. Now WordPerfect 6 is installed
    1. Now go back to the Longbow Reviver app…
    2. select the 2nd tab “Old Program Reviver
    3. using the ‘…’ button pick the newly installed c:\WPWIN60 folder
    4. Set the Run As dropdown to Windows 95
    5. next, click ‘Fix Old Program’
      1. Say ‘No’ if the Reviver tool asks if you want to re-register…
  5. Now you can happily run your WordPerfect 6 on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit (sorry, but not  64bit!)

Copyright 2018 (c) Longbow Software

Installing AutoCAD Architecture 2011 32bit on Windows 7, Windows 8 and Windows 10

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD ADT 2011…

  • “This operating system is not supported by AutoCAD® Architecture® 2011”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD® Architecture® 2011. It cannot be installed on 64-bit Windows”

How to install AutoCAD ADT 2011

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start In the Converter App and note the user interface
  3. Select the 1st tab named “AutoCAD 32bit Installer Converter
    1. Using the “. . .” button, selection your AutoCAD installation CD
    2. Next, click the “Convert button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Close the setup program when the installation is complete.
      2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  5. Now run your AutoCAD as normal

Installing ADT 2011 Service Packs

We recommend that you download and install the latest Service Packs from Autodesk which can be found here. You must install Update 1, then Update 2

Troubleshooting

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2019 (c) Longbow Software

Installing 64bit AutoCAD Civil 3d 2013 on Windows 10 64bit

Your 64bit AutoCAD Civil3d 2013 was never designed to run in Windows 10 (this version of Windows is newer than AutoCAD 2013). In order for your AutoCAD Civil3d 2013 to run as it did in previous versions of Windows, you need to follow these easy steps…

Install 64bit AutoCAD Civil 3D 2009

  1. Make sure all previous installed versions of AutoCAD 2009 are uninstalled first.
  2. Obtain your copy of the Longbow Converter here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter
    2. Using your mouse, right click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter
    3. Next, using the “…” button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Close the setup program when the installation is complete.
      2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  5. Next install the AutoCAD Civil 3d 2013 sp2 from here
  6. Now run your AutoCAD as normal

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way

Troubleshooting

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2019 (c) Longbow Software

Installing Microsoft Money 2000 on Windows 7, Windows 8 and Windows 10

Installing Microsoft Money 2000 on WIndows 7, Windows 8 and Windows 10 (both 32bit and 64bit) can be very easily defined in these short steps…

  1. First, you need to purchase a copy of the Longbow Reviver tool here (you need V4.21 or later)
  2. Using Windows Explorer, backup your entire Microsoft Money 2000 installation CD to your hard drive, to a folder path c:\InstallCDs\Microsoft Money 2000
  3. Start the Longbow Reviver tool
    1. select the 1st tab “Old Installer Reviver
    2. then using the ‘…’ button pick the  c:\InstallCDs\Microsoft Money 2000 folder

      Selecting the Microsoft Money 2000 CD on Disk

      Selecting the Microsoft Money 2000 CD on Disk

    3. Now click the ‘Fix and Run Old Installer’ button
    4. Read and understand all the prompts that appear, then continue by clicking OK.
    5. Once the Microsoft Money 2000 setup appears, install as normal *except* when prompted for the installation path, set it to c:\MsMoney2000 e.g.

      Setting the Microsoft Monet 2000 installation folder

      Setting the Microsoft Monet 2000 installation folder

    6. Once the setup is complete
      1. Do not reboot (if prompted to do so)
  4. Now Microsoft Money 2000 is installed, next
    1. Make sure the Microsoft Money 2000 setup is completely closed, then in the Longbow Reviver tool…
    2. Select the 2nd tab “Old Program Reviver
    3. Using the ‘…’ button, pick the newly installed C:\MsMoney2000 folder
    4. Set the Run As dropdown to Windows 95 Windows NT 4 (sp5)
    5. next, click ‘Fix Old Program’
      1. Say ‘No’ if the Reviver tool asks if you want to re-register… e.g.

        Fixing the Microsoft Money program files

        Fixing the Microsoft Money program files

  5. Now you can happily run your Microsoft Money 2000 on Windows 7, Windows 8 or Windows 10!

Copyright 2018 (c) Longbow Software

Installing 64bit AutoCAD LT 2014 on Windows 7, Windows 8 and Windows 10

AutoCAD LT 2014 was not designed to run in Windows 10 (Windows 10 was released after AutoCAD LT 2014) and inevitably you will run into issues such as the infamous Ribbon crashing issue, slow startup problems, text scaling issues, etc.

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD LT 2014 installation so that you can be up and running again… Just follow these easy instructions:

How to install 64bit AutoCAD LT 2014

  1. First, uninstall any existing AutoCAD LT 2014 installations on your computer
  2. Next, obtain the Longbow Converter App (V11.15 or higher), download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter
    2. Using your mouse, right-click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter
    3. Next, using the “. . .  button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the AutoCAD installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!
  5. Now you can run your AutoCAD as normal

Installing AutoCAD LT 2014 sp1

Troubleshooting

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2020 (c) Longbow Software

Installing QuickCAD V4 on Windows 7, Windows 8 and Windows 10

Installing Autodesk QuickCAD V4 on WIndows 7, Windows 8 and Windows 10 (both 32bit and 64bit) can be very easily defined in these short steps…

  1. First, you need to purchase a copy of the Longbow Reviver tool here
  2. Using Windows Explorer, backup your entire QuickCAD V4 installation CD to your hard drive, to a folder path c:\InstallCDs\QuickCAD V4
  3. Start the Longbow Reviver tool
    1. select the 1st tab “Old Installer Reviver
    2. then using the ‘…’ button pick the  c:\InstallCDs\QuickCAD V4 folder
    3. Now click the ‘Fix and Run Old Installer’ button
    4. Read and understand all the prompts that appear, then continue by clicking OK.
      1. The tool will now start initializing the setup interface, and may take up to 45 minutes to start. Please be patient…
    5. Once the QuickCAD V4  setup appears, install as normal *except* when prompted for the installation path, set it to c:\QuickCAD e.g.

      Setting the QuickCAD installation path to c:\QuickCAD

      Setting the QuickCAD installation path to c:\QuickCAD


    6. Once the setup is complete
      1. uncheck ‘Run QuickCAD’
      2. Do not reboot if prompted to do so
  4. Now QuickCAD V4 is installed
    1. Make sure the QuickCAD V4 setup is completely closed, then in the Longbow Reviver tool…
    2. Select the 2nd tab “Old Program Reviver
    3. Using the ‘…’ button, pick the newly installed C:\QuickCAD folder
    4. next, click ‘Fix Old Program’
    5. Say ‘No’ if the Reviver tool asks if you want to re-register…
  5. Now you can happily run your QuickCAD V4 on Windows 7, Windows 8 or Windows 10!

Copyright 2018 (c) Longbow Software

Installing 32bit AutoCAD Mechanical 2010 on Windows 7, Windows 8 and Windows 10 64bit

NOTE: This blog post specifically solves issues related to these error messages on installation…

  • “This operating system is not supported by AutoCAD Mechanical® 2010”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD Mechanical® 2010. It cannot be installed on 64-bit Windows”

Installing AutoCAD Mechanical 2010 (MDT 2010) 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. If you have CDs (if not check (3) below):
    1. Insert your AutoCAD MDT 2010 CD into your CDRom drive, cancel setup if it starts
    2. Next, start the Converter App
    3. Select the 1st tab in the Converter tool named “32bit AutoCAD Installer Converter
    4. Using the “…” button pick the path to your AutoCAD MDT 2013 CD
    5. Now click the “Convert” button and follow the instructions.
    6. (Skip to step 4)
  3. If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Mech_2010_English_Win_32bit.exe
    1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\MDT2010), now click OK.
    2. Wait until all of the files have extracted, when they do, the AutoCAD MDT 2013 setup will automatically launch – simply close it and move to the next step.
    3. Now, start the Longbow Converter tool
    4. select the 1st tab titled “AutoCAD 32bit Installer Converter
    5. pick the c:\Autodesk\MDT2010 folder
    6. and click the “Convert…” button.
  4. Once the conversion process is complete, click the “Install/Run Setup” button to start setup.
    1. Install as normal!
  5. Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter
    1. select the 3rd tab named “Old AutoCAD Program Reviver
    2. pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Mechanical 2010 folder
    3. then click “Fix Old Program”
  6. Now you can happily run your AutoCAD MDT 2010 32bit on Windows 7, Windows 8 and Windows 10!

Installing AutoCAD MDT 2010 Service Pack 2

  1. Here’s sp2 – AutoCAD Mechanical 2010 sp2 – install as normal

Troubleshooting:

  1. If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
  2. if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
  3. If your AutoCAD crashes while interacting with the Ribbon click here
  4. If you are unable to activate your product, or the activation process crashes:
    1. Try uninstalling the July 2014 Microsoft security update
    2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
  5. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
  6. If your Windows hangs on startup after installing please refer to this help blog
Copyright 2017 (c) Longbow Software

Installing Autodesk Land Desktop 2006 on Windows 7, Windows 8 and Windows 10

Installing AutoCAD LDT 2006 on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here
  2. Start In the Converter tool
    1. Next, click the File menu’s “Backup CD to Disk
    2. Follow the prompts
  3. Once the backup is completed
    1. click the Run Old Installer button… Read and understand all the prompts before pressing OK.
    2. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, with these exceptions… (if you cannot move past the first screen in the setup, see Trouble Shooting below)…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\ldt2006 (not C:\Program Files (x86)\Autodesk Land Desktop 2006 that is defaulted)**.
    3. If asked to reboot after the install, say NO
  5. Once installed, do not reboot, make sure you fully close the AutoCAD setup program (because the Converter is waiting for the setup program to fully close) then go back to the Converter tool, select the 3rd tab, pick the newly installed c:\ldt2006 folder and click the Fix Old Program button.
  6. Now you can run your Autodesk LDT 2006 on Windows 7, Windows 8 and Windows 10, both 32bit and 64bit.
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues“, simply click “Don’t show this message again” and then click “Run the Program…

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes immediately on startup:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2017 (c) Longbow Software

Installing 64bit AutoCAD Architecture 2014 on Windows 10 64bit

AutoCAD Architecture 2014 was not designed to run in Windows 10 (Windows 10 was released after ADT 2014) and inevitably you will run into issues such as the infamous Ribbon crashing issue, slow startup problems, text scaling issues, etc.

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the ADT 2014 installation so that you can be up and running again… Just follow these easy instructions:

How to install 64bit AutoCAD Architecture 2014

  1. First, uninstall any existing ADT 2014 installations on your computer
  2. Next, obtain the Longbow Converter App download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter
    2. Using your mouse, right-click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter
    3. Next, using the “. . .  button…
      1. select your ADT installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the ADT installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!
  5. Now you can run your Architecture as normal

Installing AutoCAD Architecture 2014 sp1

Install ADT 2014 sp1 as normal

Troubleshooting

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2020 (c) Longbow Software

Installing 32bit AutoCAD Mechanical 2009 on Windows 7, Windows 8 and Windows 10 64bit

NOTE: This blog post specifically solves issues related to these error messages on installation…

  • “This operating system is not supported by AutoCAD Mechanical® 2009”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD Mechanical® 2009. It cannot be installed on 64-bit Windows”

Installing AutoCAD Mechanical 2009 (MDT 2009) 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. If you have CDs (if not check (3) below):
    1. Insert your AutoCAD MDT 2009 CD into your CDRom drive, cancel setup if it starts
    2. Next, start the Converter App
    3. Select the 1st tab in the Converter tool named “32bit AutoCAD Installer Converter
    4. Using the “…” button pick the path to your AutoCAD MDT 2013 CD
    5. Now click the “Convert” button and follow the instructions.
    6. (Skip to step 4)
  3. If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Mech_2009_English_Win_32bit.exe
    1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\MDT2009), now click OK.
    2. Wait until all of the files have extracted, when they do, the AutoCAD MDT 2013 setup will automatically launch – simply close it and move to the next step.
    3. Now, start the Longbow Converter tool
    4. select the 1st tab titled “AutoCAD 32bit Installer Converter
    5. pick the c:\Autodesk\MDT2009 folder
    6. and click the “Convert…” button.
  4. Once the conversion process is complete, click the “Install/Run Setup” button to start setup.
    1. Install as normal!
  5. Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter
    1. select the 3rd tab named “Old AutoCAD Program Reviver
    2. pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Mechanical 2009 folder
    3. then click “Fix Old Program”
  6. Now you can happily run your AutoCAD MDT 2009 32bit on Windows 7, Windows 8 and Windows 10!

Installing AutoCAD MDT 2009 Service Pack 3

  1. Here’s sp3 – AutoCAD Mechanical 2009 sp3 – install as normal

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2017 (c) Longbow Software

Installing 64bit AutoCAD 2015 on Windows 10 64bit

AutoCAD 2015 was not designed to run in the latest releases of Windows 10 and inevitably you will run into issues such as the infamous Ribbon crashing issue, slow startup problems, text scaling issues, etc.

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2015 installation so that you can be up and running again… Just follow these easy instructions:

How to install 64bit AutoCAD 2015

  1. First, uninstall any existing AutoCAD 2015 installations on your computer
  2. Next, obtain the Longbow Converter App (V11.15 or higher), download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter
    2. Using your mouse, right-click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter
    3. Next, using the “. . .  button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the AutoCAD installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!
  5. Now you can run your AutoCAD as normal

Troubleshooting:

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2018 (c) Longbow Software

Installing 64bit AutoCAD 2014 on Windows 10 64bit

AutoCAD 2014 was not designed to run in Windows 10 (Windows 10 was released after AutoCAD 2014) and inevitably you will run into issues such as the infamous Ribbon crashing issue, slow startup problems, text scaling issues, etc.

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2014 installation so that you can be up and running again… Just follow these easy instructions:

How to install 64bit AutoCAD 2014

  1. First, uninstall any existing AutoCAD 2014 installations on your computer
  2. Next, obtain the Longbow Converter App (V11.15 or higher), download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter
    2. Using your mouse, right-click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter
    3. Next, using the “. . .  button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the AutoCAD installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!
  5. Now you can run your AutoCAD as normal

Installing AutoCAD 2014 sp1

Troubleshooting:

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2018 (c) Longbow Software

Run Adobe Acrobat X plugin in 32bit AutoCAD on Windows 7, Windows 8 and Windows 10 64bit

The Adobe Acrobat X plugin for AutoCAD only runs on 32bit AutoCAD, and 32bit AutoCAD only runs on 32bit Windows. This means that you will be stuck if you require the Adobe Acrobat X plugin for AutoCAD and move to newer hardware with 64bit Windows.

The Solution:  

Click on one of the links below to see how to install 32bit AutoCAD on 64bit Windows and then be able to install Adobe Acrobat X plugin.

Copyright 2017 (c) Longbow Software

 

 

Installing Corel Print House Magic on Windows 7, Windows 8 and Windows 10

Installing Corel Print House Magic on WIndows 7, Windows 8 and Windows 10 (both 32bit and 64bit) can be very easily defined in these short steps…

  1. First, you need to purchase a copy of the Longbow Reviver tool here
  2. Using Windows Explorer, copy your entire Corel Print House Magic installation CD to your hard drive, to a folder path c:\InstallCDs\CorelPrintHouseMagic
  3. Start the Longbow Reviver tool
    1. select the 1st tab “Old Installer Reviver
    2. then using the ‘…’ button pick the  c:\InstallCDs\CorelPrintHouseMagic folder
    3. Now click the ‘Fix and Run Old Installer’ button
    4. Read and understand all the prompts that appear, then continue by clicking OK.
    5. Install Corel Print House Magic as normal
    6. Do not reboot if prompted to do so
  4. Now Corel Print House Magic is installed
    1. Make sure the Corel Print House Magic setup is completely closed, then in the Longbow Reviver tool…
    2. Select the 2nd tab “Old Program Reviver
    3. Using the ‘…’ button, pick the newly installed c:\Coral folder
    4. and click ‘Fix Old Program’
    5. Say ‘No’ if the Reviver tool asks if you want to re-register…
  5. Now you can happily run your Corel Print House Magic on Windows 7, Windows 8 or Windows 10!

Copyright 2017 (c) Longbow Software

Installing Borland Delphi 3.0 on Windows 7, Windows 8 and Windows 10

If you are trying to install Borland Delphi 3 on Windows 7, 8 or Windows 10 64bit you are probably running into one of these problems…

This app can't run on your PC. To find a version that runs with your PC check with the publisher

This app can’t run on your PC. To find a version that runs with your PC check with the publisher.

Unsupported 16-bit Application - the program or feature cannot start or run due to incompatibility with 64-bit versions of WIndows

Unsupported 16-bit Application – the program or feature cannot start or run due to incompatibility with 64-bit versions of Windows

Luckily, the Longbow Reviver tool can solve this, here’s what you need to do:

  1. Obtain your copy of the Longbow Reviver tool here
  2. Backup your Borland Delphi 3 CD to your Desktop, in a “Delphi 3” folder
  3. Next, start the Longbow Reviver tool and select the “Old Installer Reviver” tab
    1. Using the “…” button select the path to the Desktop\Delphi 3\install folder…

      Selecting the Backup Copy of the Delphi 3 CD on your hard drive

      Selecting the Backup Copy of the Delphi 3 CD on your hard drive

    2. Once you have that selected, click OK and then pick the “Fix and Run Old Installer” button.
    3. Now, be patient, the process for initializing the Delphi 3 setup may take over an hour…
      1. Look out for a folder called _ISTMP0.DIR being created in the install folder, if it’s not there in an hour, restart your computer and try again…
      2. The _ISTMP0.DIR should slowly fill with about 21 files before the setup appears.
  4. Once your Delphi 3 setup appears
    1. step through the setup dialogs as normal until you get to the “Select Directories” dialog
    2. Here, make sure you change the Root folder to c:\Borland (instead of c:\Program Files (x86)\Borland)

      e.g.

      Update the Borland Root pathto c:\Borland

      Update the Borland Root pathto c:\Borland

    3. Make sure they are setup like this…

      Updated the Borland Root path

      Updated the Borland Root path

    4. Now carry on and install as normal until complete
    5. Be patient, it takes a while to complete…
  5. Once the install is complete
    1. make sure the Delphi 3 setup is shutdown.
    2. Go back to the Reviver tool and select the 2nd tab named “Old Program Reviver
    3. Using the ‘…’ button, pick the newly installed c:\Borland folder
    4. Then pick the “Run Old Program” button
  6. Now your Delphi 3 should be up and running…

Copyright 2017 (c) Longbow Software