Tag Archives: AutoCAD Land Desktop 2007

Installing Autodesk Land Desktop 2007 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD LDT 2007 on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here
  2. Start In the Converter tool
    1. Next, click the File menu’s “Backup CD to Disk”
    2. Follow the prompts
  3. Once the backup is completed
    1. click the Run Old Installer button… Read and understand all the prompts before pressing OK.
    2. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, with these exceptions… (if you cannot move past the first screen in the setup, see Trouble Shooting below)…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\ldt2007 (not C:\Program Files (x86)\Autodesk Land Desktop 2007 that is defaulted)**.
    3. If asked to reboot after the install, say NO
  5. Once installed, do not reboot, make sure you fully close the AutoCAD setup program (because the Converter is waiting for the setup program to fully close) then go back to the Converter tool, select the 3rd tab, pick the newly installed c:\ldt2007 folder and click the Fix Old Program button.
  6. Now you can run your Autodesk LDT 2007 on Windows 7, Windows 8 and Windows 10, both 32bit and 64bit.
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues“, simply click “Don’t show this message again” and then click “Run the Program…“

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes immediately on startup:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

– If you cannot navigate to the next page in the Setup (because clicking on the install links does nothing)…

  1. Having completed steps 1 through 3 above, Start Windows Explorer and navigate to c:\Autodesk\ldt2007\bin\installer then run Setup.exe
  2. Once setup.exe starts, resume the instructions above starting at step 4 above

Copyright 2017 (c) Longbow Software