Installing Corel Print House Magic on Windows 7, Windows 8 and Windows 10

Installing Corel Print House Magic on WIndows 7, Windows 8 and Windows 10 (both 32bit and 64bit) can be very easily defined in these short steps…

  1. First, you need to purchase a copy of the Longbow Reviver tool here
  2. Using Windows Explorer, copy your entire Corel Print House Magic installation CD to your hard drive, to a folder path c:\InstallCDs\CorelPrintHouseMagic
  3. Start the Longbow Reviver tool
    1. select the 1st tab “Old Installer Reviver
    2. then using the ‘…’ button pick the  c:\InstallCDs\CorelPrintHouseMagic folder
    3. Now click the ‘Fix and Run Old Installer’ button
    4. Read and understand all the prompts that appear, then continue by clicking OK.
    5. Install Corel Print House Magic as normal
    6. Do not reboot if prompted to do so
  4. Now Corel Print House Magic is installed
    1. Make sure the Corel Print House Magic setup is completely closed, then in the Longbow Reviver tool…
    2. Select the 2nd tab “Old Program Reviver
    3. Using the ‘…’ button, pick the newly installed c:\Coral folder
    4. and click ‘Fix Old Program’
    5. Say ‘No’ if the Reviver tool asks if you want to re-register…
  5. Now you can happily run your Corel Print House Magic on Windows 7, Windows 8 or Windows 10!

Copyright 2017 (c) Longbow Software