Installing AutoCAD Land Development Desktop R2i on Windows 7, Windows 8 and Windows 10

Installing AutoCAD Land Development Desktop R2i (LDDT R2i) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…
  1. Obtain your copy of the Longbow Converter here – you will need version 8.56 or newer
  2. Using Windows Explorer, copy your entire LDDT R2i 2000i installation CD to your hard drive, specifically to a folder path of c:\Autodesk\CD\ldtr2000i
  3. Start the Longbow Converter tool, select the 2nd tab “Old AutoCAD Installer Reviver”, pick the c:\Autodesk\CD\ldtr2000i folder, and click Run. Read and understand any/all the prompts the Converter pops up before pressing OK.
  4. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\ldt2000i (not C:\Program Files (x86)\Land Desktop R2\ as usually prompted)**
    1. Install as normal
    2. If you see the “AutoCAD Land Development Desktop 2i Migration assistant” dialog appear, say “No” – we did not test that installation path.
    3. Do not reboot if prompted to do so
  5. Make sure the setup is completely closed down, next, go back to the Converter tool, select the 3rd tab “Old AutoCAD Program Reviver”, pick the newly installed c:\ldt2000i folder and click “Fix
  6. Now you can run your Land Desktop R2i on Windows 7, Windows 8, and Windows 10, but be sure to read the Troubleshooting guide below…

Installing Autodesk Civil Design 2i

Once you have installed AutoCAD Land Development Desktop R2i using the above instructions, you can now install Civil. Here’s how:

  1. Using Windows Explorer, copy your Autodesk Civil Design 2i installation CD to your hard drive, specifically to a folder path of c:\Autodesk\CD\CivilDesign2000i
  2. Start the Converter again, select the 2nd tab “Old AutoCAD Installer Reviver”, pick the c:\Autodesk\CD\CivilDesign2000i folder, and click “Run“.
    1. If the Converter asks you “What type of installer is this? – Is this a service pack , update or plug-in/app…?” – say “Yes”.
    2. Read and understand any/all the prompts the Converter pops up before pressing OK
  3. Install as normal.
    1. If you cannot find your menu items, you may need to MENULOAD c:\ldt2000i\Support\Civil.mnu

Installing Autodesk Survey 2i

Once you have installed AutoCAD Land Development Desktop R2i using the above instructions, you can now install Survey. Here’s how:

  1. Using Windows Explorer, copy your Autodesk Survey 2i installation CD to your hard drive, specifically to a folder path of c:\Autodesk\CD\Survey2000i
  2. Start the Converter again, select the 2nd tab “Old AutoCAD Installer Reviver”, pick the c:\Autodesk\CD\Survey2000i folder, and click “Run“.
    1. If the Converter asks you “What type of installer is this? – Is this a service pack , update or plug-in/app…?” – say “Yes”.
    2. Read and understand any/all the prompts the Converter pops up before pressing OK
  3. Install as normal.
    1. If you cannot find your menu items, you may need to MENULOAD c:\ldt2000i\Support\Survey.mnu

The LDT R2i Service Pack

  1. First download the Land Desktop 2i Civil Design 2i Service Pack 2 (stand-alone and network) from here and save to c:\Autodesk\sp
  2. Next, start the Converter, select the 3rd tab “Old AutoCAD Program Reviver” select the c:\Autodesk\sp folder, then click Fix.
    1. If asked if this is a service pack by the Converter tool, say yes.
  3. Now run the ld2i_sp2_ul.exe as normal from Windows Explorer.

Troubleshooting:

Copyright 2015 (c) Longbow Software