Tag Archives: LDDT

Installing Autodesk Land Development Desktop R2 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD Land Development Desktop R2 (LDDT R2 is AutoCAD 2000 based) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…
 
  1. Obtain your copy of the Longbow Converter here – you will need version 8.50 or newer
  2. Using Windows Explorer, copy your entire LDDT R2 2000 installation CD to your hard drive, specifically to a folder path of c:\Autodesk\lddt2000
  3. Start the Longbow Converter tool, select the 2nd tab, pick the c:\Autodesk\lddt2000 folder, and click Run. Read and understand all the prompts before pressing OK.
  4. For AutoCAD 2000 versions, the Migration Wizard almost instantly pops up, simply click Install 2000 as normal. Now, I know it’s unheard of these days, but at this point expect to wait at least 45 minutes for your Land Desktop R2 setup.exe program to fully appear. Once the setup starts, stop and read the next step…
  5. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\landdt2000 (not .\Autodesk Land Development Desktop as usually prompted)**
    1. Ignore the fact the the shortcut cannot be created, you will need to create this by hand once the installation is finished.
    2. Do not reboot if prompted to do so
  6. Once installed, using Windows Explorer, navigate to c:\Autodesk\lddt2000\data and run the MDAC_TYP.exe program, with these instructions
    1. When the “Microsoft Data Access Components 2.0” license agreement pops up, if you agree with the terms, click ‘Yes’
    2. At the next dialog, simply click “Continue”
    3. When the option dialog to do a Complete install or a Custom install, click “Custom”
    4. At the next dialog, un-check “Microsoft Remote Data Services” and then click “Continue”
    5. Exit the setup when finished.
  7. Next, go back to the Converter tool, select the 3rd tab, pick the newly installed c:\landdt2000 folder and click “Fix”
  8. Now you must run your AutoCAD Land Development Desktop R2 2000 as is as a first time initialization, it will start up in raw AutoCAD mode (using Windows Explorer, simply navigate to c:\landdt2000 and double click acad.exe)
    1. If you want to startup in LDT mode, simply create a shortcut to c:\landdt2000\acad.exe and set the Target property to c:\landdt2000\acad.exe /p lddt.arg
    2. If you want to startup in Map mode, simply create a shortcut to c:\landdt2000\acad.exe and set the Target property to c:\landdt2000\acad.exe /p map.arg
  9. Now you can run your Land Desktop R2 on Windows 7, Windows 8, and Windows 10, but be sure to read the Troubleshooting guide below…

The LDT 2000 Service Pack

  1. First download the stand-alone LandDesktop R2 2.01 sp from here and save to c:\Autodesk\sp
  2. Next, start the Converter, select the 3rd tab “Old AutoCAD Program Reviver” select the c:\Autodesk\sp folder, then click Fix.
    1. If asked if this is a service pack by the Converter tool, say yes.
  3. Now run the land201.exe as normal from Windows Explorer.

Troubleshooting:

  • If you are getting an “Out of memory error” when you start a new drawing, try creating a new project, and use a previous drawing to ‘Save As’ a template for use instead.

  • If your AutoCAD 2000 setup is not starting after 45 minutes, try rebooting, then restart the steps above. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try installing AutoCAD 2000 from Windows Safe Mode

 

Copyright 2014 (c) Longbow Software

Installing Autodesk Land Desktop 2005 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD LDT 2005 on Windows 7, Windows 8, Windows 8.1 and Windows 10 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here
  2. Copy your LDT 2005 installation CD media to your hard drive, to a folder path c:\Autodesk\ldt2005 
    1. NOTE: If you have more LDT specific CD’s (not Survey or Civil as these are installed separately), simply copy the contents of each CD directly over the top of Disk 1, basically, overwrite all files in your previously copied c:\Autodesk\ldt2005 folder with the files from each of the CDs
  3. Next, start the Longbow Converter tool
    1. select the 2nd tab named “Old AutoCAD Installer Reviver“
    2. pick the c:\Autodesk\ldt2005 folder (where you copied your LDT CDs to on your hard drive)
    3. click the Run Old Installer button.
      1. Read and understand all the prompts before pressing OK.
      2. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, with these exceptions… (if you cannot move past the first screen in the setup, see Trouble Shooting below)…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\ldt2005 (not C:\Program Files (x86)\Autodesk Land Desktop 2005 that is defaulted)**.
    3. If asked to reboot after the install, say NO
  5. Once installed
    1. do not reboot
    2. make sure you fully close the AutoCAD setup program (because the Converter is waiting for the setup program to fully close) then
    3. go back to the Converter tool
    4. select the 3rd tab named “Old AutoCAD Program Reviver“
    5. pick the newly installed c:\ldt2005 folder
    6. click the Fix Old Program button.
  6. Now you can run your Autodesk LDT 2005 on Windows 7, Windows 8 and Windows 10, both 32bit and 64bit.
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues“, simply click “Don’t show this message again” and then click “Run the Program…“

Troubleshooting:

– If you are seeing this error when running either the “Import LandXML” or “Export LandXML” commands

LandXML Export - Run-time error '429' ActiveX component can't create object

LandXML Export – Run-time error ‘429’ ActiveX component can’t create object

then LDT 2005 Fixed VBA Modules into the same folder as your acad.exe (using the instructions above, it should be c:\ldt2005)

– If you are unable to activate your product, or the activation process crashes immediately on startup:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2023 (c) Longbow Software