Install Autodesk Architectural Desktop 2i on Windows 10, Windows 7, Windows 8 and Windows 8.1

Most current AutoCAD R2 ADT users are very used to the software package and cannot do without it. With the latest hardware and required move to new Windows versions, trying to install your AutoCAD ADT gives an error like this one…

Windows 16bit setup error - This app can't run on your PC

Windows 16bit setup error – This app can’t run on your PC

Or maybe this error…

Setup Halted System requirements error Wrong OS, AutoCAD supports Windows NT 4.0, Windows NT 5.0, Windows 95 and Windows 98

Error while trying to install AutoCAD ADT R2

…all is not lost, just read on…

Installing AutoCAD Autodesk Architectural Desktop R2i (AutoCAD 2000) on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

I recommend that you follow these steps precisely so to eliminate the risk of something going wrong with the install…

Obtain your copy of the Longbow Converter here

  1. Using Windows Explorer…
    1. Copy your entire AutoCAD Autodesk Architectural Desktop 2i installation CD to your hard drive, to a folder path named exactly c:\Autodesk\CDs\adt2000 e.g.

      Copy ADT 2000 CD to c:\Autodesk\CDs\adt2000

      Copy ADT 2000 CD to c:\Autodesk\CDs\adt2000


  2. Start the Longbow Converter tool
    1. Select the 2nd tab named “Old AutoCAD Installer Reviver
    2. Pick the c:\Autodesk\CDs\adt2000 folder
    3. Now click “Run Old Installer”.
    4. The process will take a few moments to complete, then a dialog will appear – read and understand all the prompts before clicking OK.
  3. For ADT 2000, the Migration Wizard almost instantly pops up, simply click Install 2000 as normal.
  4. Now, I know it’s unheard of these days, but at this point expect to wait at least 45 minutes for your ADT R2i setup.exe program to fully appear.
    1. Once the setup starts, stop and read the next step…
    2. In the setup program…
      1. navigate through each setup dialog as normal except when you get to the installation folder… **it’s vitally important to make sure you install to c:\adt2000 (not “c:\Program Files (x86)\AutoCAD Architectural Desktop” as usually prompted)**
    3. During the final stages of the installation, simply ignore the fact the the ADT shortcut cannot be created, you will need to create this by hand once the installation is finished.
    4. Do not reboot if prompted to do so
  5. Once installed
    1. Go back to the Converter tool
    2. Select the 3rd tab named “Old AutoCAD Program Reviver
    3. Pick the newly installed c:\adt2000 folder and click ‘Fix Old Program‘.
  6. Now you can happily run your AutoCAD Autodesk Architectural Desktop 2i in Windows 7, Windows 8 and Windows 10!
  7. Simply use Windows Explorer, navigate to c:\adt2000 and double click acad.exe (you will need to manually create a shortcut as mentioned in step (4.a)

    Installing AutoCAD 2000 Service Pack 1

    1. Download AutoCAD 2000 sp1 from here
    2. Unzip your newly downloaded sp to folder path c:\Autodesk\sp
    3. Start the Converter, select the 2nd tab, pick the c:\Autodesk\sp\AutoCAD 2000 sp1 folder and click ‘Run’
    4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal

    Installing AutoCAD 2000 Service Pack 2

    1. Download AutoCAD 2000 sp2 from here
    2. Unzip your newly downloaded sp to folder path c:\Autodesk\sp
    3. Start the Converter, select the 2nd tab, pick the c:\Autodesk\sp\AutoCAD 2000 sp2 folder and click ‘Run’
    4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal.

     

    Troubleshooting:
    If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
    Copyright 2016 (c) Longbow Software

Installing AutoCAD 2000 on Windows 7, Windows 8 and Windows 10

Most current AutoCAD 2000 users are very used to the software package and cannot do without it. With the latest hardware and required move to new Windows versions, trying to install your AutoCAD 2000 gives an error like this one…

Windows 16bit setup error - This app can't run on your PC

Windows 16bit setup error – This app can’t run on your PC

Or maybe this error…

Setup Halted System requirements error Wrong OS, AutoCAD supports Windows NT 4.0, Windows NT 5.0, Windows 95 and Windows 98

Error while trying to install AutoCAD 2000

…all is not lost, just read on…

Installing AutoCAD 2000 on Windows 7, Windows 8, Windows 8.1 or Windows 10 both 32bit and 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…
  1. Obtain your copy of the Longbow Converter here
  2. Start the Longbow Converter tool by double clicking the Longbow Converter shortcut on your Desktop… .
    1. Insert your AutoCAD 2000 CD
    2. Select the 2nd tab titled “Old AutoCAD Installer Reviver” by clicking on it
    3. Next, using the ‘…’ button select your AutoCAD 2000 CD
    4. Now click the “Run Old Installer” button.
      1. Read, understand and follow all the prompts.
  3. For AutoCAD 2000, the Migration Wizard almost instantly pops up, simply click Install 2000 as normal.
    1. Now, I know it’s unheard of these days, but at this point expect to wait at least 45 minutes for your AutoCAD 2000 setup.exe program to fully appear.
    2. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acad2000 (not Program Files (x86)\AutoCAD 2000 as usually prompted)** e.g.
    Setting AutoCAD 2000 custom install directory to c:\acad2000

    Setting AutoCAD 2000 custom install directory to c:\acad2000

    1. Ignore the error message that the shortcut cannot be created “Cannot create folder AutoCAD 2000“, you will need to create the program shortcut by hand once the installation is finished.
    2. Do not reboot if prompted to do so
  5. Once installed, go back to the Converter tool, select the 3rd tab, pick the newly installed c:\acad2000 folder and click ‘Fix‘.
  6. Now you can happily run your AutoCAD 2000 in Windows 7, Windows 8 and Windows 10! Simply use Windows Explorer, navigate to c:\acad2000 and double click acad.exe.

Installing AutoCAD 2000 Service Pack 1

  1. Download AutoCAD 2000 sp1 from here
  2. Unzip your newly downloaded sp to folder path c:\Autodesk\sp
  3. Start the Converter, select the 2nd tab, pick the c:\Autodesk\sp\AutoCAD 2000 sp1 folder and click ‘Run’
  4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal

Installing AutoCAD 2000 Service Pack 2

  1. Download AutoCAD 2000 sp2 from here
  2. Unzip your newly downloaded sp to folder path c:\Autodesk\sp
  3. Start the Converter, select the 2nd tab, pick the c:\Autodesk\sp\AutoCAD 2000 sp2 folder and click ‘Run’
  4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal.

 Installing AutoCAD 2000 3D Graphics System Update 1

  1. If you use 3D alot in AutoCAD 2000, you should read on to install the 3DUpdate…
  2. Download AutoCAD 2000 3D Graphics System Update1 from here
  3. Unzip your newly downloaded sp to folder path c:\Autodesk\update
  4. Start the Converter, select the 2nd tab, pick the c:\Autodesk\update folder and click ‘Run’
  5. Wait for the setup to appear, it could take up to 45 minutes, then install as normal.

Troubleshooting:

  • If your AutoCAD 2000 setup is not starting after 45 minutes
    • try rebooting, then restart the steps above. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try installing AutoCAD 2000 from Windows Safe Mode
  • Plotting – if you are having plotting issues, either
  • If you see Proxy Warning Dialogs when you open a DWG using AutoCAD 2000, you need to install the service packs as described above.
  • If you are getting a WinHelp() error when pressing F1 to try and access the Help system then simply install the WinHelp (WinHlp32.exe) module from Microsoft
  • Issues with Calcomp Digitizer – Calcomp Digitizer not working 
  • If you still see the error “Wrong OS, AutoCAD supports Windows NT 4.0, Windows NT 5.0, Windows 95 and Windows 98” even after converting
    • Copy the AutoCAD 2000 CD fresh to your computer, then start from step (1) again
    • If you still get the error, you need the latest version of the Longbow Converter tool
  • If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
Copyright 2017 (c) Longbow Software

Installing AutoCAD LT 2000 on Windows 10, Windows 7, Windows 8 and Windows 8.1

Most current AutoCAD 2000 users are very used to the software package and cannot do without it. With the latest hardware and required move to new Windows versions, trying to install your AutoCAD ADT gives an error like this one…

Windows 16bit setup error - This app can't run on your PC

Windows 16bit setup error – This app can’t run on your PC

Or maybe this error…

Setup Halted System requirements error Wrong OS, AutoCAD supports Windows NT 4.0, Windows NT 5.0, Windows 95 and Windows 98

Error while trying to install AutoCAD LT 2000 on newer versions of Windows

…all is not lost, just read on…

Installing AutoCAD 2000 LT on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

  1. Obtain your copy of the Longbow Converter here
  2. Using Windows Explorer you need to make a copy of your original LT 2000 installation CD…
    1. Copy your entire AutoCAD LT 2000 CD to your hard drive, specifically to a folder path named c:\Autodesk\CDs\acadlt2000
  3. Start the Longbow Converter tool…
    1. select the 2nd tab named “Old AutoCAD Installer Reviver
    2. pick the newly copied c:\Autodesk\CDs\acadlt2000 folder
    3. click the “Run Old Installer” button…
      1. Read and understand all the prompts before clicking “OK”.
      2. Now, I know it’s unheard of these days, but at this point expect to wait at least 45 minutes for your AutoCAD LT 2000 setup.exe program to fully appear. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder path input – **it’s vitally important to make sure you install your LT 2000 program files to c:\acadlt2000 (not Program Files (x86)\AutoCAD LT 2000 as usually prompted)**
    1. Towards the end of the installation an error will appear like “Cannot create folder Autocad LT 2000” – simply click OK and ignore this message, you will need to create a shortcut on your Desktop to c:\acadlt2000\aclt.exe by hand once the installation is finished.
    2. Do not reboot if prompted to do so
  5. Once you have fully closed your LT 2000 setup program…
    1. go back to the Converter tool
    2. select the 3rd tab named “Old AutoCAD Program Reviver
    3. pick the newly installed c:\acadlt2000 folder and then click the “Fix Old Program” button.
  6. Now you can happily run your AutoCAD LT 2000 on Windows 7, Windows 8 and Windows 10!
Troubleshooting:
Copyright 2017 (c) Longbow Software