Are you a software developer who wants the best way to reduce anxiety after a stressful day at work? Consider CBD gummies for anxiety. Observer has a list of the best CBD gummies for those interested.

Installing Map 3D 2016 32bit on Windows 7, Windows 8 and Windows 10

Posted on April 29, 2016 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map3D 2016…

“This operating system isn’t supported by AutoCAD”
“You can’t install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD ‘version’. It can’t be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2016 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2016
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2016 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk named something like “Autodesk_Map_2016_English_Win_32bit_DLM.sfx.exe”
1. Run the Autodesk_Map_2016_English_Win_32bit_DLM.sfx.exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (for simplicity sake, we’ll refer to it from here as c:\Autodesk\Map3d2016), now click “OK”. Wait until all of the files have extracted, when they do, note that the Map 3D 2016 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2016 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Map 3d 2016 folder, then click ‘Fix Old Program‘.
Now you can happily run your Map 3D 2016 32bit on Windows 7, Windows 8 and Windows 10 64bit!

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing DrafixCAD on Windows 7, Windows 8 and Windows 10 64bit

Posted on April 20, 2016 by simonbooth

If you are having problems installing your DrafixCAD on your new PC, like you are unable to run the setup.exe as shown below, then read on…

Windows 16bit setup error – This app can’t run on your PC

NOTE: DrafixCAD 3.0 is not currently supported on 64bit Windows, you will need 32bit Windows.

How to install DrafixCAD

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

Obtain your copy of the Longbow Reviver tool here – you need version 4.10 or newer
Copy your entire Drafix CAD CD to a folder on your hard drive, say C:\DrafixCAD\CD
Start the Longbow Reviver tool
1. Select the 1st tab named “Old Installer Reviver”
2. Next, select the path the folder where you copied the CD to = should be C:\DrafixCAD\CD
3. Next, hit the ‘Fix Old Installer‘ button and follow the onscreen instructions
4. Once you have clicked the final OK button the Reviver will force the setup.exe to start up. Be patient – it may take up to 90 minutes to start, so go and make some coffee!
When the DrafixCAD setup appears
1. If setup asks you if you want “Network”, if possible say No – selecting Network will give a “Can’t Open Library” error on first launch.
2. Install as normal except make sure you **don’t** install to C:\Program Files (x86)\Softdesk\CAD, instead, install to C:\Softdesk\CAD
  Be sure to select a different folder c:\Softdesk\cad
3. Also, don’t reboot if prompted to do so
Once DrafixCAD is installed and before running the application…
1. Go back to the Reviver tool
2. select the 2^rd tab named “Old Program Reviver“
3. Using the ‘…’ button select the path C:\Softdesk\CAD
4. then click the ‘Fix Old Program‘ button.
Now you can happily run your DrafixCAD!

Troubleshooting

NOTE: DrafixCAD 3.0 is not currently supported on 64bit Windows, you will need 32bit Windows.

Installing 32bit AutoCAD Civil 3D 2008 on 64bit Windows 7, Windows 8 and Windows 10

Posted on March 21, 2016 by simonbooth

These instructions solve issues around installing/running your old AutoCAD Civil 3D 2008 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

“This operating system is not supported by AutoCAD Civil 3D 2008”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD Civil 3D 2008 installation so that you can be up and running again… Follow these instructions:

How to install AutoCAD Civil 3D 2008

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

Installing the AutoCAD Civil 3D 2008 sp2 (contains sp1)

We recommend that you download and install the latest sp2 from Autodesk which can be found here – AutoCAD Civil 3d 2008 sp2

Troubleshooting

– If you are unable to activate your product, or the activation process crashes:

- Try uninstalling the July 2014 Microsoft security update
- Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD Civil 3D 2011 on 64bit Windows 7, Windows 8 and Windows 10

Posted on March 18, 2016 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Civil 3D® 2011”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Civil 3D® 2011. It cannot be installed on 64-bit Windows”

Installing AutoCAD Civil 3D 2011 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Civil 3D 2011 CD to your hard drive, to a folder path c:\Autodesk\Civil3d2011
2. Next, copy Disk 2 of your Civil 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Civil3d2011 folder
3. Same again for Disk 3
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Civil3d2011), now click OK. Wait until all of the files have extracted, when they do, the Civil 3D 2011 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Civil3d2011 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Civil3d 2011 folder, then click Fix.
Now you can happily run your Civil 3D 2011 32bit on Windows 10, Windows 7 and Windows 8 64bit.

Installing the 32bit Civil 3D Service Packs

We recommend that you download and install the latest Service Packs from Autodesk which can be found here. NOTE once installed, no need to re-run the Converter App

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD Mechanical 2016 on Windows 7, Windows 8 and Windows 10

Posted on February 9, 2016 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of 32bit AutoCAD Mechanical 2016 on 64bit Windows…

“This operating system is not supported by AutoCAD® Mechanical® 2016”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Mechanical® 2016. It cannot be installed on 64-bit Windows”

Installing 32bit AutoCAD Mechanical 2016 on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Mechanical 2016 install media to your hard drive, to a folder path c:\Autodesk\MDT2016
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\MDT2016 folder
If you have a single self extracting exe downloaded from Autodesk called something like Mechanical_2016_English_Win_32_64bit_en-us_Setup.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\MDT2016), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD Mechanical 2016 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\MDT2016 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
1. Once installed, we recommend you disable the AutoCAD Communication Center/InfoCenter toolbar as it uses a lot of memory, causes slow startup and most people don’t use it anyway!
Now you can happily run your AutoCAD Mechanical 2016 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10!

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

Try uninstalling the July 2014 Microsoft security update

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing AutoCAD Architecture 2009 32bit on Windows 7, Windows 8 and Windows 10

Posted on January 17, 2016 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD ADT 2009…

“This operating system is not supported by AutoCAD® Architecture® 2009”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Architecture® 2009. It cannot be installed on 64-bit Windows”

How to install AutoCAD ADT 2009

Obtain your purchased copy of the Longbow Converter here
Start In the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way

Installing ADT 2009 Service Packs

We recommend that you download and install the latest Service Packs from Autodesk which can be found here. Update 3 contains Update 1 and 2 also.

AutoCAD Architecture 2009 Update 3 – install as normal

Troubleshooting

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD Civil 3D 2012 on 64bit Windows 7, Windows 8 and Windows 10

Posted on November 26, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Civil 3D® 2012”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Civil 3D® 2012. It cannot be installed on 64-bit Windows”

Installing AutoCAD Civil 3D 2012 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Civil 3D 2012 CD to your hard drive, to a folder path c:\Autodesk\Civil3d2012
2. Next, copy Disk 2 of your Civil 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Civil3d2012 folder
3. Same again for Disk 3
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Civil3d2012), now click OK. Wait until all of the files have extracted, when they do, the Civil 3D 2012 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab named “AutoCAD 32bit Installer Converter”
1. Next, using the ‘…‘ button select the newly created c:\Autodesk\civil3d2012 folder, and click the ‘Convert‘ button.
  1. If the Converter complains that this is not a 32bit installer, make sure you select the folder which contains the setup.exe and the setup.ini files in the root of the installation media
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Civil3d 2012 folder, then click Fix.
Now you can happily run your Civil 3D 2012 32bit on Windows 10, Windows 7 and Windows 8 64bit.

Installing the 32bit Civil 3D Service Packs

We recommend that you download and install the latest Service Packs from Autodesk which can be found here –

AutoCAD Civil 3D 2012 Update 1
Install the 2012 Ribbon Hotfix – install as normal
AutoCAD Civil 3D 2012 Update 2.1
AutoCAD Civil 3D 2012 Update 3
AutoCAD Civil 3D 2012 Update 4

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing AutoCAD Mechanical 2008 from Inventor Series 2008 CD on Windows 10, Windows 7, Windows 8 and Windows 8.1

Posted on November 2, 2015 by simonbooth

NOTE: This solution only works with an Autodesk Inventor Series 2008 installation media.

Installing Mechanical 2008 from Inventor Series 2008 CD on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
Copy your Inventor Series 2008 CD to your hard drive, to a folder path c:\Autodesk\CDs\InventorSeries2008
1. IMPORTANT: If you have more than one CD, copy them all to the same c:\Autodesk\CDs\InventorSeries2008 folder – overwriting any existing files and folders.
Start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\CDs\InventorSeries2008 folder.
The Converter will say that the media is not fully supported; simply click the Tools->Manual MSI Correction menu option
Once the conversion process is completed, click the “Run Setup/Install AutoCAD…” button to bring up your Inventor 2008 setup program as normal.
1. Un-check all install options except AutoCAD Mechanical 2008
2. Install as normal
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\MDT 2008 folder, then click “Fix“
Now you can happily run your AutoCAD Mechanical 2008 on Windows 10, Windows 7 or Windows 8.

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs please read this blog entry on the File->Open or File->Save Crash in Autodesk Products

Installing Adobe Photoshop 6 on Windows 7, Windows 8 and Windows 10

Posted on October 28, 2015 by simonbooth

Installing your Adobe Photoshop 6.0 on Windows 7, Windows 8 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

How to install Adobe Photoshop 6

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

Obtain your copy of the Longbow Reviver tool here – you need version 4.10 or newer
Using Windows Explorer, copy your entire Adobe Photoshop 6 install CD media to your hard drive, to a folder path c:\InstallCDs\Adobe\Photoshop6
Start the Longbow Reviver tool…
1. select the 1st tab “Old Installer Reviver“
2. using the ‘…’ button pick the c:\InstallCDs\Adobe\Photoshop6 folder
3. Now click the ‘Fix and Run Old Installer’ button
4. Read and understand all the prompts that appear, then continue by clicking OK.
5. You will need to wait up to 45 minutes before seeing the Adobe Photoshop 6.0 setup screen appear, be patient!
  1. If you have waited 90 minutes and nothing has appeared, reboot into Safe Mode and try this same process again.
Once your Adobe Photoshop 6.0 setup screen appears, install as normal except:
1. When you arrive at the install to ‘Destination Folder” – it is vitally important that you install to c:\adobe\photoshop6 (not C:\Program Files (x86)\Adobe\Photoshop 6.0 as normally prompted)
2. Do not reboot if prompted to do so
Now Photoshop is installed, go back to the the Longbow Reviver tool
1. select the 2nd tab “Old Program Reviver“
2. using the “…” button pick the newly installed c:\adobe\photoshop6 folder
3. Set the “Run As” Option to “Windows 98“
4. click ‘Fix Old Program’
  1. Say ‘Yes’ if the Reviver tool asks if you want to re-register…
Now you can happily run your Adobe Photoshop 6 on Windows 7, Windows 8 or Windows 10 32bit or 64bit!

Installing the Photoshop 7 Upgrade

If you have a Adobe Photoshop 7 Upgrade CD, simply follow the same instructions as detailed here – Installing Adobe Photoshop 7 on Windows 10, Windows 7, Windows 8 and Windows 8.1

Troubleshooting

If your setup is not appearing within 1 hour, reboot into Safe Mode and try the same process as above again.

Install 32bit AutoCAD Architecture 2015 on Windows 7, Windows 8 and Windows 10

Posted on October 7, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Architecture® 2015”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Architecture® 2015. It cannot be installed on 64-bit Windows”

Installing AutoCAD Architecture 2015 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Architecture 2015 CD to your hard drive, to a folder path c:\Autodesk\ADT2015
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\ADT2015 folder
If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Arch_2015_English_Win_32_64bit_en-us_Setup.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\ADT2015), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD Architecture 2015 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\ADT2015 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
1. Once installed, we recommend you disable the AutoCAD Communication Center/InfoCenter toolbar as it uses a lot of memory, causes slow startup and most people don’t use it anyway!
Now you can happily run your AutoCAD Architecture 2015 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10!

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

Try uninstalling the July 2014 Microsoft security update

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD LT 2011 on Windows 7, Windows 8 and Windows 10

Posted on August 29, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD LT® 2011”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD LT® 2011. It cannot be installed on 64-bit Windows”

Installing AutoCAD LT 2011 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD LT 2011 CD to your hard drive, to a folder path c:\Autodesk\AutoCAD2011
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCAD2011 folder
If you have a single self extracting exe downloaded from Autodesk (something like AutoCAD_LT_2011_Multilingual_Americas_WIN_32bit.exe)
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\AutoCAD2011), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD LT 2011 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\AutoCAD2011 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD LT 2011 folder, then click Fix.
Now you can happily run your 32bit AutoCAD LT 2011 on Windows 7, Windows 8 and Windows 10!

Installing AutoCAD LT 2011 Service Packs

AutoCAD LT 2011 has 2 updates, you must install Update 1.1 first then Update 2… Here are the instructions for installing the AutoCAD LT 2011 service packs

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD Civil 3D 2009 on 64bit Windows 7, Windows 8 and Windows 10

Posted on August 19, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Civil 3D® 2009”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Civil 3D® 2009. It cannot be installed on 64-bit Windows”

Installing AutoCAD Civil 3D 2009 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Civil 3D CD to your hard drive, to a folder path c:\Autodesk\Civil3d2009
2. Next, copy Disk 2 of your Civil 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Civil3d2009 folder
3. Same again for Disk 3
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Civil3d2009), now click OK. Wait until all of the files have extracted, when they do, the Civil 3D 2009 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool
1. Select the 1st tab titled “AutoCAD 32bit Installer Converter“
2. Using the ‘…’ button, select the c:\Autodesk\Civil3d2009 folder and click OK
3. Once you have c:\Autodesk\Civil3d2009 selected , click the “Convert…” button to convert the media.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Civil3d 2009 folder, then click “Fix Old Program…“.
Now you can happily run your Civil 3D 2009 32bit on Windows 10, Windows 7 and Windows 8 64bit.

Installing the Civil 3d 2009 sp3

We recommend that you download and install the latest sp3 from Autodesk which can be found here – AutoCAD Civil 3d 2009 sp3

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD Architecture 2016 on Windows 7, Windows 8 and Windows 10

Posted on August 19, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of 32bit AutoCAD Architecture 2016 on 64bit Windows…

“This operating system is not supported by AutoCAD® Architecture®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Architecture® 2016. It cannot be installed on 64-bit Windows”

Installing 32bit AutoCAD Architecture 2016 on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Architecture 2016 install media to your hard drive, to a folder path c:\Autodesk\ADT2016
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\ADT2016 folder
If you have a single self extracting exe downloaded from Autodesk called something like Architecture_2016_English_Win_32_64bit_en-us_Setup.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\ADT2016), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD Architecture 2016 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\ADT2016 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
1. Once installed, we recommend you disable the AutoCAD Communication Center/InfoCenter toolbar as it uses a lot of memory, causes slow startup and most people don’t use it anyway!
Now you can happily run your AutoCAD Architecture 2016 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10!

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

Try uninstalling the July 2014 Microsoft security update

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing AutoCAD Architecture 2010 32bit on Windows 7, Windows 8 and Windows 10

Posted on August 17, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD ADT 2010…

“This operating system is not supported by AutoCAD® Architecture”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Architecture® 2010. It cannot be installed on 64-bit Windows”

Installing AutoCAD Architecture 2010 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Start the Converter App and note the user interface
2. Select the 1st tab named “AutoCAD 32bit Installer Converter“
  1. Using the “. . .” button, select your AutoCAD installation CD
  2. Next, click the “Convert“ button and follow instructions
  3. Now go to step 4
If you have a single self extracting exe downloaded from Autodesk…
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\adt2010), now click OK. Wait until all of the files have extracted, when they do, note that the ADT 2010 setup will automatically launch – make sure you close the setup and move to the next step
2. Start the Converter App and note the user interface
3. Using the “. . .” button, select the path c:\Autodesk\adt2010
4. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup.
2. Next, just install as normal.
Once the installation process is complete…
1. be sure to fully close the AutoCAD setup.
2. Wait for the Converter to finish and print “Success”
Now you can happily run your AutoCAD Architecture 2010 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10 64bit!

Troubleshooting:

If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
If your AutoCAD crashes while interacting with the Ribbon click here
If you are unable to activate your product, or the activation process crashes:
1. Try uninstalling the July 2014 Microsoft security update
2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
If your Windows hangs on startup after installing please refer to this help blog

Installing Map 3D 2015 32bit on Windows 7, Windows 8 and Windows 10

Posted on August 14, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map3D 2015…

“This operating system is not supported by AutoCAD® Map 3D®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Map 3D® 2015. It cannot be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2015 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2015
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2015 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Map3d2015), now click OK. Wait until all of the files have extracted, when they do, note that the Map 3D 2015 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2015 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Map 3d 2015 folder, then click ‘Fix Old Program‘.
Now you can happily run your Map 3D 2015 32bit on Windows 7, Windows 8 and Windows 10 64bit!

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD LT 2013 on Windows 7, Windows 8 and Windows 10

Posted on August 14, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD LT®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD LT® 2013. It cannot be installed on 64-bit Windows”
“FATAL ERROR: (0x7ff87b2f0005) c:\program files\autodesk\autocad lt 2013\acsceneoe.dbx“

Installing AutoCAD LT 2013 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Make sure all previous installed versions of AutoCAD 2013 are uninstalled first.
Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD LT 2013 CD to your hard drive, to a folder path c:\Autodesk\AutoCADLT2013
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADLT2013 folder
If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_LT_2013_English_Win_32bit.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\AutoCADLT2013), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD LT 2013 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab named ‘AutoCAD 32bit Installer Converter‘
1. pick the c:\Autodesk\AutoCADLT2013 folder
2. click the ‘Convert‘ button.
Once the conversion process is complete
1. Click ‘Install/Run Setup‘ to start setup
2. Install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete…
1. go back to the Converter, select the 3rd tab named ‘Old AutoCAD Program Reviver‘
2. Pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD LT 2013 folder
3. Click ‘Fix Old Program‘.
Now you can happily run your AutoCAD LT 2013 32bit on Windows 7, Windows 8 and Windows 10!

Installing AutoCAD LT 2013 Service Packs

There are 2 sp’s for AutoCAD LT 2013, these are the the 32bit versions of the sp’s

Here’s sp1 – AutoCAD LT 2013 sp1 – install as normal
Here’s sp2 – AutoCAD LT 2013 sp2 – install as normal

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD LT 2012 on Windows 7, Windows 8 and Windows 10

Posted on August 14, 2015 by simonbooth

These instructions solve issues around installing/running your old AutoCAD LT 2012 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these

“This operating system is not supported by AutoCAD® LT 2012”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® LT 2012. It cannot be installed on 64-bit Windows”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD LT 2012 installation so that you can be up and running again… Just follow these instructions:

How to install AutoCAD LT 2012

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

Installing AutoCAD LT 2012 Service Packs

We recommend that you download and install the latest Service Packs from Autodesk which can be found here

AutoCAD LT 2012 sp1 – install as normal
AutoCAD LT 2012 sp2 – install as normal

Troubleshooting

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD Mechanical 2008 on Windows 7, Windows 8 and Windows 10

Posted on May 28, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Mechanical 2008…

“This operating system is not supported by AutoCAD® Mechanical®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Mechanical® 2008. It cannot be installed on 64-bit Windows”

Installing 32bit AutoCAD Mechanical 2008 on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Mechanical 2008 CD to your hard drive, to a folder path c:\Autodesk\AutoCADM2008
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADM2008 folder
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\AutoCADM2008), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD Mechanical 2008 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\AutoCADM2008 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Mechanical 2008 folder, then click Fix
Now you can happily run your AutoCAD Mechanical 2008 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10!

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD 2016 on Windows 7, Windows 8 and Windows 10

Posted on May 28, 2015 by simonbooth

These instructions solve issues around installing/running your old AutoCAD 2016 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

“This operating system is not supported by AutoCAD® 2016”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® 2016. It cannot be installed on 64-bit Windows”

How to install AutoCAD 2016

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal
Once installed, we recommend you disable the AutoCAD Communication Center/InfoCenter toolbar as it uses a lot of computer memory and causes slow startup and most people don’t use it anyway!

Troubleshooting

– If your AutoCAD starts with a blank white screen…

Try turning down your screen resolution, if this doesn’t help…
- from the Converter tool, pick the Tools->Clean Compatibility settings

– If you are unable to activate your product, or the activation process crashes:

Try uninstalling the July 2014 Microsoft security update

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing Map 3D 2013 32bit on Windows 7, Windows 8 and Windows 10

Posted on March 26, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map3d 2013…

“This operating system is not supported by AutoCAD® Map 3D®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Map 3D® 2013. It cannot be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2013 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2013
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2013 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Map3d2013), now click OK. Wait until all of the files have extracted, when they do, note that the Map 3D 2013 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2013 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Map 3d 2013 folder, then click ‘Fix’.
Now you can happily run your Map 3D 2013 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit.

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing Map 3D 2012 32bit on Windows 7, Windows 8 and Windows 10

Posted on March 26, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map 3D 2012…

“This operating system is not supported by AutoCAD® Map 3D®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Map 3D® 2012. It cannot be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2012 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2012
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2012 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Map3d2012), now click OK. Wait until all of the files have extracted, when they do, note that the Map 3D 2012 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2012 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Map 3d 2012 folder, then click ‘Fix’.
Now you can happily run your Map 3D 2012 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10 64bit.

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing Map 3D 2011 32bit on Windows 7, Windows 8 and Windows 10

Posted on March 26, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map 3D 2011…

“This operating system is not supported by AutoCAD® Map 3D® 2011”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Map 3D® 2011. It cannot be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2011 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2011
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2011 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Map3d2011), now click OK. Wait until all of the files have extracted, when they do, note that the Map 3D 2011 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2011 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Map 3d 2011 folder, then click ‘Fix’.
Now you can happily run your Map 3D 2011 32bit on Windows 7, Windows 8 and Windows 10 64bit.

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing Map 3D 2010 32bit on Windows 7, Windows 8 and Windows 10

Posted on March 26, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map 3D 2010…

“This operating system is not supported by AutoCAD® Map 3D®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Map 3D® 2010. It cannot be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2010 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2010
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2010 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Map3d2010), now click OK. Wait until all of the files have extracted, when they do, note that the Map 3D 2010 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2010 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Map3d 2010 folder, then click ‘Fix’.
Now you can happily run your Map 3D 2010 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10 64bit.

Troubleshooting:

If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
If your AutoCAD crashes while interacting with the Ribbon click here
If you are unable to activate your product, or the activation process crashes:
1. Try uninstalling the July 2014 Microsoft security update
2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
If your Windows hangs on startup after installing please refer to this help blog

Installing Map 3D 2009 32bit on Windows 7, Windows 8 and Windows 10

Posted on March 26, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map 3d 2009…

“This operating system is not supported by AutoCAD Map 3D 2009”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD Map 3D 2009. It cannot be installed on 64-bit Windows”

How to install AutoCAD Map 3d 2009

Obtain your purchased copy of the Longbow Converter here
Start In the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way

Installing AutoCAD Map 3d 2009 Service Packs

We recommend that you download and install the latest Service Packs from Autodesk which can be found here. Update 3 contains Update 1 and 2 also.

AutoCAD Map3d 2009 Update 3 – install as normal

Troubleshooting

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD Electrical 2008 on Windows 7, Windows 8 and Windows 10

Posted on February 25, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Electrical® 2008”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Electrical® 2008. It cannot be installed on 64-bit Windows”

…Also, hung “Merging content…” message while installing…

Installing 32bit AutoCAD Electrical 2008 on Windows 7, Windows 8, Windows 8.1 and Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

First of all, you need V7.37 of the Longbow Converter (or newer) – obtain the latest version of the Longbow Converter here
If you have CDs (if not skip to step 3 below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Electrical 2008 CD to your hard drive, to a folder path c:\Autodesk\AutoCADE2008
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADE2008 folder
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder name created for later use (we’ll refer to it from here as c:\Autodesk\AutoCADE2008), now click OK.
2. Wait until all of the files have extracted, when they do, the AutoCAD Electrical 2008 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool (V7.37 or newer), select the 1st tab, pick the c:\Autodesk\AutoCADE2008 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\Acade 2008 folder, then click Fix Old Program
Now you can happily run your AutoCAD 2008 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

by Simon Booth

How to install DrafixCAD

How to install AutoCAD Civil 3D 2008

Installing the AutoCAD Civil 3D 2008 sp2 (contains sp1)

Troubleshooting

Installing the 32bit Civil 3D Service Packs

How to install AutoCAD ADT 2009

Installing ADT 2009 Service Packs

Troubleshooting

How to install Adobe Photoshop 6

Installing the Photoshop 7 Upgrade

Troubleshooting

How to install AutoCAD LT 2012

Installing AutoCAD LT 2012 Service Packs

Troubleshooting

How to install AutoCAD 2016

Troubleshooting

How to install AutoCAD Map 3d 2009

Installing AutoCAD Map 3d 2009 Service Packs

Troubleshooting