Tag Archives: 32bit

Installing AutoCAD LT 2010 32bit on Windows 7, Windows 8 and Windows 10

Posted on by

NOTE: This blog post specifically solves issues related to these error messages on installation…

  • “This operating system is not supported by AutoCAD LT®”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD LT® 2010. It cannot be installed on 64-bit Windows”

Installing AutoCAD LT 2010 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

How to install AutoCAD LT 2010

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Converter App and note the user interface
  3. Select the 1st tab named “AutoCAD 32bit Installer Converter“
    1. Using the “. . .” button, selection your AutoCAD installation CD
    2. Next, click the “Convert“ button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Close the setup program when the installation is complete.
      2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  5. Now run your AutoCAD as normal.

Installing AutoCAD LT 2010 Service Packs

AutoCAD LT 2010 has 2 service packs, instead of calling them sp1 and sp2 they decided to call them Update1 and Update2. You only need to install Update2 because it already includes Update1.

  1. Download the AutoCAD LT 2010 Update 2 (sp2) from here
  2. Unzip and simply run the autocad2010update2.exe to install the update

Troubleshooting

  1. If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
  2. if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
  3. If your AutoCAD crashes while interacting with the Ribbon click here
  4. If you are unable to activate your product, or the activation process crashes:
    1. Try uninstalling the July 2014 Microsoft security update
    2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
  5. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
  6. If your Windows hangs on startup after installing please refer to this help blog
Copyright 2020 (c) Longbow Software

Installing Ulead PhotoImpact 11 on Windows 10, Windows 7, Windows 8 and Windows 8.1

Posted on by

This blog post is specifically for installing Ulead PhotoImpact 11 on Windows 10, Windows 7, Windows 8 and Windows 8.1 both 32bit and 64bit.

For instructions on installing Ulead PhotoImpact 10 on Windows 10, Windows 7, Windows 8 and Windows 8.1 click here

Installing PhotoImpact 11 on Windows 10, Windows 7, Windows 8 or Windows 8.1 can be very easily defined in these short steps. NOTE: Be sure to use exactly same folder paths as specified below in order to ensure a clean install.

  1. Obtain your copy of the Longbow Reviver here
  2. Using Windows Explorer, copy your PhotoImpact 11 installation CD to c:\PhotoImpact11CD
    1. If your PhotoImpact 11 installation consists of a single file called “Ulead PI 11.exe“, then once you have copied it to c:\PhotoImpact11CD simply rename it to setup.exe
  3. Start the Longbow Reviver tool, select the first tab “Old Installer Reviver” tab, pick the newly copied c:\PhotoImpact10CD folder, then click the Fix and Run Old Installer button. Once completed, read and understand all messages from the Reviver tool…
  4. Next, your PhotoImpact 11 setup will startup and take you through the normal install process with this exception…
    1. When asked, make sure you install PhotoImpact 11 to c:\Ulead\PhotoImpact11 (not C:\Program Files (x86)\Ulead Systems\Ulead PhotoImpact 11)
  5. Once installed, be sure to close the PhotoImpact 11 main setup as the Reviver tool is waiting for it to close before allowing you to move to the next step.
  6. Now go back to the Reviver tool, select the 2nd tab “Old Program Reviver”, pick the newly installed c:\Ulead\PhotoImpact11 folder, then click “Fix Old Program“. If asked “Do you want to me to re-register your Program’s components…”, say No…
  7. Install the PhotoImpact 11 patch from here upi11 patch
  8. Next, start PhotoImpact 11
    1. if a dialog window appears on first launch which appears to hang the system, simply use task manager to End Process PhotoImpact 11 (restarting PhotoImpact 11 will now work)
    2. if the application hangs on first launch, simply use task manager to End Process PhotoImpact 11 (restarting PhotoImpact 11 will now work)
  9. You can now run your Ulead PhotoImpact 11 on Windows 10, Windows 7, Windows 8 and Windows 8.1 64bit
Copyright 2015 (c) Longbow Software

Installing Ulead PhotoImpact 10 on Windows 10, Windows 7, Windows 8 and Windows 8.1

Posted on by

This blog post is specifically for installing Ulead PhotoImpact 10, Ulead Photo Explorer 8.5 and Ulead COOL 360 on Windows 10, Windows 7, Windows 8 and Windows 8.1 both 32bit and 64bit (including

For instructions on installing Ulead PhotoImpact 11 on Windows 10, Windows 7, Windows 8 and Windows 8.1 click here

Installing PhotoImpact 10 on Windows 7, Windows 8 or Windows 8.1 can be very easily defined in these short steps. NOTE: Be sure to use exactly same folder paths as specified below in order to ensure a clean install.

  1. Obtain your copy of the Longbow Reviver here
  2. Using Windows Explorer, copy your PhotoImpact 10 installation CD to c:\PhotoImpact10CD
  3. Start the Longbow Reviver tool, select the first tab “Old Installer Reviver” tab, pick the newly copied c:\PhotoImpact10CD folder, then click the Fix and Run Old Installer button
  4. Once completed, read and understand all messages from the Reviver tool…
  5. Next, your PhotoImpact 10 setup will startup and take you through the normal install process with these exceptions..
    1. When asked, make sure you install PhotoImpact 10 to c:\Ulead\PhotoImpact10 (not C:\Program Files (x86)\Ulead Systems\Ulead PhotoImpact 10)
    2. When asked, make sure you install Photo Explorer 8.5 to c:\Ulead\PhotoExplorer85 (not C:\Program Files (x86)\Ulead Systems\Ulead Photo Explorer 8.5)
    3. When asked, make sure you install COOL 360 to c:\Ulead\Cool360 (not C:\Program Files (x86)\Ulead Systems\Ulead COOL 360)
  6. Once installed, be sure to close the PhotoImpact 10 main setup as the Reviver tool is waiting for it to close before allowing you to move to the next step.
  7. Finally, go back to the Reviver tool, select the 2nd tab “Old Program Reviver”, pick the newly installed c:\Ulead folder, then click “Fix Old Program“. If asked “Do you want to me to re-register your Program’s components…”, say No…
  8. You can now run your Ulead PhotoImpact 10, Ulead Photo Explorer 8.5 and Ulead COOL 360 Windows 10, Windows 7, Windows 8 and Windows 8.1 64bit
Copyright 2015 (c) Longbow Software

Installing 32bit AutoCAD Architecture 2008 on Windows7, Windows 8 and Windows 10 64bit

Posted on by

NOTE: This blog post specifically solves issues related to these error messages on installation…

  • “This operating system is not supported by AutoCAD® Architecture® 2008”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD® Architecture® 2008. It cannot be installed on 64-bit Windows”

Installing 32bit AutoCAD Architecture 2008 on Windows 7, Windows 8 or Windows 8.1 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. If you have CDs (if not check (3) below):
    1. Using Windows Explorer, copy Disk 1 of your AutoCAD Architecture 2008 CD to your hard drive, to a folder path c:\Autodesk\ADT2008
    2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\ADT2008 folder
  3. If you have a single self extracting exe downloaded from Autodesk
    1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\ADT2008), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD Architecture 2008 setup will automatically launch – simply close it and move to the next step.
  4. Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\ADT2008 folder, and click the Convert button.
  5. Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
  6. Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Architecture 2008 folder, then click Fix
  7. Now you can happily run your AutoCAD Architecture 2008 32bit on Windows 7, Windows 8 and Windows 10.

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2015 (c) Longbow Software

Installing 32bit AutoCAD LT 2008 on Windows 7, Windows 8 and Windows 10

Posted on by

These instructions solve issues around installing/running your old AutoCAD LT 2008 on newer versions of 64bit Windows 7, Windows 8 and Windows 10.

Some more common issues stopping you from using your AutoAD are error messages like these…

“This operating system is not supported by AutoCAD LT 2008”

or

“FATAL ERROR: Unhandled 0x… Exception…”

You can solve all the problems with your AutoCAD LT 2008 automatically by using our Longbow Converter App, it fixes and manages the AutoCAD LT 2008 installation so that you can be up and running again.

How to install AutoCAD LT 2008

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Converter App
  3. Insert your AutoCAD LT 2008 CD into your CDRom drive…
    1. Select the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using the “. . .” button, select your AutoCAD LT 2008 installation CD
    3. Next, click the “Convert“ button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Fully close the AutoCAD LT setup application once complete
      2. Close the Converter App.

Installing the AutoCAD LT 2008 Service Packs

Installing AutoCAD LT 2008 sp1

  1. Download the Download the AutoCAD LT 2008 sp1 zip from here (autocadlt2008lockedsp1.exe )
  2. Unzip the zip file and simply run the autocadlt2008lockedsp1.exe – 32-bit as normal

Troubleshooting

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2019 (c) Longbow Software

Installing AutoCAD ADT 2004 on Windows 7, Windows 8 and Windows 10

Posted on by

Follow these instructions to solve issues around installing/running your old AutoCAD 2004 on newer versions of 64bit Windows 7, Windows 8 and Windows 10

How to install AutoCAD Architecture 2004 

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Longbow Converter tool
    1. Insert your AutoCAD CD into your CDRom drive
    2. Select the 2nd tab named “Old AutoCAD Installer Reviver“
    3. Using the “…” button, path the to your AutoCAD CD
    4. Click “Run Old Installer”
      1. Read and follow all the prompts
      2. Once the AutoCAD setup starts, stop and read the next step…
  3. In the AutoCAD setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you arrive at the installation folder path setup dialog…
      1. **it’s vitally important to make sure you install to c:\acad2004 (not Program Files (x86)\AutoCAD 2004)**.
    2. While installing…
      1. If you see an error in install “.NET Runtime Optimization Service has stopped working” – simply ignore by clicking the “Close Program” button
      2. Do not reboot if asked to do so
    3. Once installed
      1. Do not reboot if asked to do so
      2. Make sure to fully close the setup program when the installation is complete.
      3. Back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  4. Finally, reboot your PC and run your AutoCAD as normal
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues”
      1. Click “Don’t show this message again”
      2. then click “Run the Program…”

Troubleshooting

  1. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2020 (c) Longbow Software

Install 32bit AutoCAD 2009 on Windows 7, Windows 8 and Windows 10

Posted on by

These instructions solve issues around installing/running your old AutoCAD 2009 on newer versions of 64bit Windows 7, Windows 8 and Windows 10.

Some common issues are error messages like these…

“This operating system is not supported by AutoCAD 2008”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2009 installation so that you can be up and running again. Simply follow the instructions below 🙂

NOTE: Autodesk no longer supply License Activation codes. Once you have installed your AutoCAD (following the instructions below) you will need to authorize/activate your AutoCAD yourself, find out how by clicking here

How to install AutoCAD 2009

  1. Purchased a copy of the Longbow Converter here
  2. Start the Converter App
  3. Insert your AutoCAD 2009 CD into your CDRom drive…
    1. Select the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using the “. . .” button, select your AutoCAD 2009 installation CD
    3. Next, click the “Convert“ button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Fully close the AutoCAD setup application once complete
      2. Close the Converter App.
  5. Now run your AutoCAD as normal

Troubleshooting

– If you have a single self extracting exe downloaded from Autodesk

  1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder name for later use (we’ll refer to it from here as c:\Autodesk\AutoCAD2009), now click OK.
  2. Wait until all of the files have extracted, when they do, the AutoCAD 2009 setup will automatically launch – simply close and move to step 3.2 above, making sure to select c:\Autodesk\AutoCAD2009.

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2020 (c) Longbow Software

Installing 32bit AutoCAD 2014 on Windows 7, Windows 8 and Windows 10

Posted on by

These instructions solve issues around installing/running your old AutoCAD 2014 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

  • “This operating system is not supported by AutoCAD® 2014”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD® 2014. It cannot be installed on 64-bit Windows”

How to install AutoCAD 2014

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Converter App and note the user interface
  3. Select the 1st tab named “AutoCAD 32bit Installer Converter“
    1. Using the “. . .” button, selection your AutoCAD installation CD
    2. Next, click the “Convert“ button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Close the setup program when the installation is complete.
      2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  5. Now run your AutoCAD as normal

Troubleshooting

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2019 (c) Longbow Software

Installing 32bit AutoCAD 2012 on Windows 7, Windows 8 and Windows 10

Posted on by

These instructions solve issues around installing/running your old AutoCAD 2012 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these

  • “This operating system is not supported by AutoCAD® 2012”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD® 2012. It cannot be installed on 64-bit Windows”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2012 installation so that you can be up and running again… Follow these instructions:

How to install AutoCAD 2012

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Converter App and note the user interface
  3. Select the 1st tab named “AutoCAD 32bit Installer Converter“
    1. Using the “. . .” button, selection your AutoCAD installation CD
    2. Next, click the “Convert“ button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Close the setup program when the installation is complete.
      2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  5. Now run your AutoCAD as normal

Installing AutoCAD 2012 Service Packs

We recommend that you download and install the latest Service Packs from Autodesk which can be found here

Troubleshooting

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2019 (c) Longbow Software

Installing AutoCAD 2010 32bit on Windows 7, Windows 8 and Windows 10

Posted on by

These instructions solve issues around installing/running your old AutoCAD 2010 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

“This operating system is not supported by AutoCAD 2010”

“Checking License…”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2010 installation so that you can be up and running again… Follow these instructions:

How to install AutoCAD 2010

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Converter App and note the user interface
  3. Select the 1st tab named “AutoCAD 32bit Installer Converter“
    1. Using the “. . .” button, selection your AutoCAD installation CD
    2. Next, click the “Convert“ button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Close the setup program when the installation is complete.
      2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  5. Now run your AutoCAD as normal

Installing AutoCAD 2010 Service Packs

AutoCAD 2010 has 2 service packs, instead of calling them sp1 and sp2 they decided to call them Update1 and Update2. You only need to install Update2 because it already includes Update1.

  1. Download the AutoCAD 2010 Update 2 (sp2)
  2. Unzip and simply run the autocad2010update2.exe to install the update

Troubleshooting

  1. If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
  2. if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
  3. If your AutoCAD crashes while interacting with the Ribbon click here
  4. If you are unable to activate your product, or the activation process crashes:
    1. Try uninstalling the July 2014 Microsoft security update
    2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
  5. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
  6. If your Windows hangs on startup after installing please refer to this help blog
Copyright 2019 (c) Longbow Software

Installing 32bit AutoCAD Civil 3D 2010 on 64bit Windows 7, Windows 8 and Windows 10

Posted on by

These instructions solve issues around installing/running your old AutoCAD Civil 3d 2010 (C3D 2010) on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

“This operating system is not supported by AutoCAD® Civil 3D® 2010”

“You cannot install this product on the current operating system”

“You are attempting to use a 32-bit installer on a 64-bit operating system”

“This is a 32-bit AutoCAD® Civil 3D® 2010. It cannot be installed on 64-bit Windows”

“Checking License”

You can automatically solve these problems using our Longbow Converter App. It fixes and manages the AutoCAD Civil 3d 2010 installation so that you can be up and running again… Follow these instructions:

How to install AutoCAD Civil 3d 2010

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Converter App and note the user interface
  3. Select the 1st tab named “AutoCAD 32bit Installer Converter“
    1. Using the “. . .” button, selection your AutoCAD installation CD
    2. Next, click the “Convert“ button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Close the setup program when the installation is complete.
      2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab, it should display “Success!”
  5. You can now run your AutoCAD, but before using, you must install the sp3 update below.

Installing the Civil 3d sp3 (Update 3.1)

We recommend that you download and install the latest sp3 from Autodesk which can be found here – AutoCAD Civil 3d 2010 sp3

Troubleshooting

  1. If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
  2. if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
  3. If your AutoCAD crashes while interacting with the Ribbon click here
  4. If you are unable to activate your product, or the activation process crashes:
    1. Try uninstalling the July 2014 Microsoft security update
    2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
  5. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
  6. If your Windows hangs on startup after installing please refer to this help blog
Copyright 2019 (c) Longbow Software

Install AutoCAD 2002 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD 2002 on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. Using Windows Explorer, backup your entire AutoCAD 2002 CD to your hard drive, to a folder path c:\Autodesk\CDs\acad2002 
  3. Start the Longbow Converter tool
    1. select the 2nd tab titled “Old AutoCAD Installer Reviver“
    2. Using the ‘…’ button, pick the c:\Autodesk\CDs\acad2002 folder (where you just copied your 2002 CD)
    3. Click the “Run Old Installer” button.
      1. Read and understand all the prompts before pressing OK.
      2. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acad2002 (not Program Files (x86)\AutoCAD 2002 as usually prompted by default)**
    1. IMPORTANT NOTE: You may find that entering the path C:\acad2002 may not take (a bug in the AutoCAD 2002 installer). In that case, you will need to select the installation folder C:\Program Files (x86)\AutoCAD 2002 in step (5) below
    2. Do not reboot if prompted to do so
  5. Once installed, go back to the Converter tool…
    1. Select the 3rd tab titled “Old AutoCAD Program Reviver“
    2. Using the ‘…’ button, pick the newly installed c:\acad2002 folder
    3. click “Fix Old Program“.
  6. Now run your AutoCAD 2002 and completely register as normal. Once registered, exit AutoCAD and continue to the next step…
  7. Next, obtain the AutoCAD 2002 sp1 from here unzip and save to c:\Autodesk\sp – do not install yet
    1. Go back into the Converter
    2. Select the 3rd tab again
    3. titled “Old AutoCAD Program Reviver“
    4. Using the ‘…’ button, select the c:\Autodesk\sp folder
    5. click “Fix Old Program“
  8. Finally, install the AutoCAD 2002 sp1 by running the c:\Autodesk\sp\acad2002sp1.exe 
  9. Now, you can happily run your AutoCAD 2002 on Windows 10, Windows 7 and Windows 8.
Troubleshooting:
Copyright 2017 (c) Longbow Software

Installing AutoCAD 2006 on Windows 7, Windows 8 and Windows 10

Posted on by

Follow these instructions to solve issues around installing/running your old AutoCAD 2006 on newer versions of 64bit Windows 7, Windows 8 and Windows 10

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

How to install AutoCAD 2006 

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Longbow Converter tool
    1. Insert your AutoCAD CD into your CDRom drive
    2. select the 2nd tab named “Old AutoCAD Installer Reviver“
    3. Using the “…” button, path the to your AutoCAD CD
    4. Click “Run Old Installer”
      1. Read and follow all the prompts
      2. Once the AutoCAD setup starts, stop and read the next step…
  3. In the setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues”
      1. simply check the “Don’t show this message again”
      2. then click the “Run the program without getting help” button
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\acad2006 (not Program Files (x86)\AutoCAD 2006)**.
  4. Once installed
    1. Do not reboot if asked to do so
    2. Make sure to fully close the setup program when the installation is complete.
    3. Back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  5. Finally, reboot your PC and run your AutoCAD as normal
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues”
      1. Click “Don’t show this message again”
      2. then click “Run the Program…”

Installing AutoCAD 2006 Service Pack 1

  1. English Users, Download your English AutoCAD 2006 sp1 from here
    1. Non-English users, Download your language specific AutoCAD 2006 sp1 from here
  2. Now copy your newly downloaded sp (for English users the filename is AutoCAD2006SP1.exe) to folder path c:\Autodesk\sp
  3. Start the Converter App
    1. select the 3rd tab named “Old AutoCAD Program Reviver“
    2. Using the “. . .” button, pick the c:\Autodesk\sp folder
    3. click “Fix Old Program“.
  4. Now you can run the service pack exe installer from Windows explorer as normal
  5. Once completed, now run your AutoCAD!

Troubleshooting

– If you see a warning dialog when you run AutoCAD saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program…”

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2019 (c) Longbow Software
 
 

Installing AutoCAD 2005 on Windows 7, Windows 8 and Windows 10

Posted on by

Follow these instructions to solve issues around installing/running your old AutoCAD 2005 on Windows 7, Windows 8 and Windows 10

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

How to install AutoCAD 2005 

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Longbow Converter tool
    1. Insert your AutoCAD CD into your CDRom drive
    2. Select the 2nd tab named “Old AutoCAD Installer Reviver“
    3. Using the “…” button, path the to your AutoCAD CD
    4. Click “Run Old Installer”
      1. Read and follow all the prompts
      2. Once the AutoCAD setup starts, stop and read the next step…
  3. In the AutoCAD setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you arrive at the installation folder path setup dialog…
      1. it’s vitally important to make sure you install to c:\acad2005 (not Program Files (x86)\AutoCAD 2005)
    2. While installing…
      1. If you see an error in install “.NET Runtime Optimization Service has stopped working” – simply ignore by clicking the “Close Program” button
      2. When a message box appears warning that “64bit .NET Unavailable” – simply click OK to carry on and install AutoCAD as normal – this does not affect anything.
      3. Do not reboot if asked to do so
    3. Once installed
      1. Do not reboot if asked to do so
      2. Make sure to fully close the setup program when the installation is complete.
      3. Switch back to the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab – it should display “SUCCESS!”
  4. Finally, reboot your PC and run your AutoCAD as normal
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues”
      1. Click “Don’t show this message again”
      2. then click “Run the Program…”

Installing AutoCAD 2005 Sp1

To install the sp for your AutoCAD…
  1. Download AutoCAD 2005 Sp1
  2. Copy the service pack exe installer to folder path c:\Autodesk\sp
  3. Start the Converter App
    1. select the 3rd tab named “Old AutoCAD Program Reviver“
    2. Using the “. . .” button, pick the c:\Autodesk\sp folder
    3. click “Fix Old Program“.
  4. Now you can run the service pack exe installer from Windows explorer as normal
  5. NOTE: If your AutoCAD now fails to start, you may now need to again re-run the Converter process from step (6) above

Troubleshooting

– If you are unable to activate your product, or the activation crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2021 (c) Longbow Software

Install 32bit AutoCAD 2009 LT on Windows 7, Windows 8 and Windows 10

Posted on by

These instructions solve issues around installing/running your AutoCAD LT 2009 on newer versions of Windows 7, Windows 8 and Windows 10 64bit

Some common issues are error messages like these…

“This operating system is not supported by AutoCAD LT 2008”

You can automatically solve these problems using our Longbow Converter App; it fixes and manages the AutoCAD LT 2009 installation so that you can be up and running again. Simply follow the instructions below 🙂

NOTE: Autodesk no longer supply License Activation codes. Once you have installed your AutoCAD (following the instructions below) you will need to authorize/activate your AutoCAD yourself, find out how by clicking here

How to install AutoCAD LT 2009

  1. Purchased a copy of the Longbow Converter here
  2. Start the Converter App
  3. Insert your AutoCAD LT 2009 CD into your CDRom drive…
    1. Select the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using the “. . .” button, select your AutoCAD 2009 installation CD
    3. Next, click the “Convert“ button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Fully close the AutoCAD setup application once complete
      2. Close the Converter App.
  5. Now run your AutoCAD as normal

Troubleshooting

– If you have a single self extracting exe downloaded from Autodesk

  1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder name for later use (we’ll refer to it from here as c:\Autodesk\AutoCADLT2009), now click OK.
  2. Wait until all of the files have extracted, when they do, the AutoCAD LT 2009 setup will automatically launch – simply close and move to step 3.2 above, making sure to select c:\Autodesk\AutoCADLT2009.

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

 
Copyright 2020 (c) Longbow Software
 

 

Installing 32bit AutoCAD LT 2010 on Windows 10, Windows 7, Windows 8 and Windows 8.1

Posted on by

NOTE: This blog post specifically solves issues related to these error messages on installation…

  • “This operating system is not supported by AutoCAD LT® 2010”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD LT® 2010. It cannot be installed on 64-bit Windows”

Installing AutoCAD LT 2010 32bit on Windows 10, Windows 7, Windows 8 or Windows 8.1 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. If you have CDs (if not check (3) below):
    1. Using Windows Explorer, copy Disk 1 of your AutoCAD LT 2010 CD to your hard drive, to a folder path c:\Autodesk\AutoCADLT2010
    2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADLT2010 folder
  3. If you have a single self extracting exe downloaded from Autodesk
    1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\AutoCADLT2010), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD LT 2010 setup will automatically launch – simply close it and move to the next step.
  4. Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\AutoCADLT2010 folder, and click the Convert button.
  5. Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
  6. Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD 2010 folder, then click Fix
  7. Now you can happily run your AutoCAD LT 2010 32bit on Windows 10, Windows 7 and Windows 8.

Troubleshooting:

  1. If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
  2. if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
  3. If your AutoCAD crashes while interacting with the Ribbon click here
  4. If you are unable to activate your product, or the activation process crashes:
    1. Try uninstalling the July 2014 Microsoft security update
    2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
  5. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
  6. If your Windows hangs on startup after installing please refer to this help blog
Copyright 2015 (c) Longbow Software

Install Autodesk Architectural Desktop 3 on Windows 10, Windows 7, Windows 8 and Windows 8.1

Posted on by

Installing AutoCAD Autodesk Architectural Desktop 3 (AutoCAD 2000i) on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

I recommend that you follow these steps precisely so to eliminate the risk of something going wrong with the install…
  1. Obtain your copy of the Longbow Converter here
  2. Using Windows Explorer, copy your entire Autodesk Architectural Desktop 3 CD to your hard drive, to a folder path c:\Autodesk\CDs\adt2000i 
  3. Start the Longbow Converter tool
    1. Select the 2nd tab named “Old AutoCAD Installer Reviver“
    2. Pick the newly copied c:\Autodesk\CDs\adt2000i  folder
    3. Now click the “Run Old Installer” button.
    4. Read and understand all the prompts before clicking OK.
      1. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\adt2000i (not Program Files (x86)\Autodesk Architectural Desktop 3 as prompted by default)**
    1. Next, install as normal
    2. Do not reboot is prompted to do so
  5. Once installed, go back to the Converter tool
    1. Select the 3rd tab named “Old AutoCAD Program Reviver”
    2. Pick the newly installed c:\adt2000i folder
    3. Click the “Fix Old Program” button.
  6. Now, you can happily run your Autodesk Architectural Desktop 3 on Windows 10, Windows 7 and Windows 8.
Troubleshooting:
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
Copyright 2016 (c) Longbow Software

Installing AutoCAD 2005 LT on Windows 7, Windows 8, and Windows 10

Posted on by

Installing AutoCAD 2005 LT on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here (we recommend the latest version for LT 2005)
  2. Copy your AutoCAD 2005 LT CD to your hard drive, to a folder path c:\Autodesk\acadlt2005 
  3. Start the Longbow Converter tool
    1. select the 2nd tab named “Old AutoCAD Installer Reviver“
    2. pick the c:\Autodesk\acadlt2005 folder
    3. click Run.
      1. Read and understand all the prompts before pressing OK.
      2. Once the setup starts, stop and read the next step…
  4. In your LT 2005 setup program…
    1. If you see a dialog titled “64-bit .NET Unavailable” – simply ignore it and click OK
    2. Now, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acadlt2005 (not Program Files (x86)\AutoCAD LT 2005**
    3. If you see an error in install “.NET Runtime Optimization Service has stopped working” – simply ignore by clicking the “Close Program” button
  5. Once installed
    1. go back to the Converter tool
    2. select the 3rd tab named “Old AutoCAD Program Reviver”
    3. pick the newly installed c:\acadlt2005 folder
    4. click Fix.
  6. Now you can run your AutoCAD LT 2005, but it’s a good idea to install the latest service packs.
    1. NOTE: If you see a warning dialog when you run saying “This program has known compatibility issues“, simply click “Don’t show this message again” and then click “Run the Program…“
Installing AutoCAD 2005 LT Sp1
  1. Download the AutoCAD 2005 LT Sp1 (locked) from our good friends at CADStudio (as Autodesk no longer post older sp’s)
  2. Copy the ACLT2005sp1SWL.exe to folder path c:\Autodesk\sp
  3. Start the Converter, select the 3rd tab, pick the c:\Autodesk\sp folder and click Fix.
  4. Now run the ACLT2005sp1SWL.exe from Windows explorer
  5. NOTE: If your AutoCAD fails to start, you may now need to again re-run the Converter process from step (6) above
Troubleshooting:

– If you are unable to activate your product, or the activation crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2016 (c) Longbow Software

Installing Inventor 2008 on Windows 10, Windows 7, Windows 8 and Windows 8.1

Posted on by

If you have tried installing Inventor 2008 on Windows 10, Windows 7 or Windows 8, most likely you will have found that either opening a model (File->Open menu) or creating one (File->New menu) crashes Inventor 2008 straight away, making it completely useless…

Installing a working copy of Inventor 2008 on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…
NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.
  1. Obtain your copy of the Longbow Converter here
  2. Backup your Inventor 2008 CD to your hard drive, to a folder path c:\Autodesk\Inventor2008 
  3. Start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Inventor2008 folder.
  4. The Converter will say that the media is not fully supported; simply click the Tools->Manual MSI Correction menu option
  5. Now install your Inventor 2008 media from c:\Autodesk\Inventor2008 as normal, once installed, do not start Inventor yet.
  6. Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Inventor 2008 folder, then click “Fix Old Program“
  7. Download and install Inventor 2008 sp1 – do not run Inventor.
  8. Download and install Inventor 2008 sp2 – do not run Inventor.
  9. Download and install Inventor 2008 sp3 – do not run Inventor.
  10. Reboot
  11. Now you can happily run your Inventor 2008 on Windows 10, Windows 7 or Windows 8.

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs please read this blog entry on the File->Open or File->Save Crash in Autodesk Products

Copyright 2015 (c) Longbow Software

Installing AutoCAD 2007 LT on Windows 7, Windows 8 and Windows 10

Posted on by

Follow these instructions to solve issues around installing/running your old AutoCAD LT 2007 on newer versions of 64bit Windows 7, Windows 8 and Windows 10

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

How to install AutoCAD LT 2007

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Longbow Converter tool
    1. Insert your AutoCAD LT 2007 CD into your CDRom drive
    2. select the 2nd tab named “Old AutoCAD Installer Reviver“
    3. Using the “…” button, path the to your AutoCAD 2007 CD
    4. Click “Run Old Installer”
      1. Read and follow all the prompts
      2. Once the AutoCAD LT 2007 setup starts, stop and read the next step…
  3. In the setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help” button
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\acadlt2007 (not Program Files (x86)\AutoCAD LT 2007)**.
  4. Now simply reboot your PC and run your AutoCAD as normal
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program…”

Installing AutoCAD LT 2007 Sp1

To install the sp for your AutoCAD…
  1. Download and unzip the AutoCAD LT 2007 Sp1
  2. Copy the autocad2007sp1.exe to folder path c:\Autodesk\sp
  3. Start the Converter, select the 3rd tab, pick the c:\Autodesk\sp folder and click Fix.
  4. Now you can run the autocad2007sp1.exe from Windows explorer and install normally.
  5. Next install sp2 just below…

Installing AutoCAD LT 2007 Sp2

To install the sp for your AutoCAD…
  1. Download and unzio the AutoCAD LT 2007 Sp2
  2. Copy the autocad2007sp2.exe to folder path c:\Autodesk\sp
  3. Start the Converter, select the 3rd tab, pick the c:\Autodesk\sp folder and click Fix.
  4. Now you can run the autocad2007sp2.exe from Windows explorer and install normally.

Troubleshooting

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2024 (c) Longbow Software

Installing AutoCAD 2000 from Windows Safe Mode

Posted on by

If you are reading this post, it’s because your AutoCAD 2000 setup program is not starting after following the 2000 installation steps that we documented here and you have reached the Troubleshooting section.

Why the setup is not starting is a big question, most likely it’s because a Windows Update or some other installer update is pending (in which case a reboot should solve) or it could be a security ‘feature’ a 3rd party anti-virus application or similar is imposing on your system which is in turn blocking your R14 setup. The thing is, it’s impossible for us to realistically diagnose the exact problem for you, so we came up with a fail safe solution – install using Windows Safe Mode, here’s how…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here, install it.
  2. Using Windows Explorer, copy your entire AutoCAD 2000 CD to your hard drive, to a folder path c:\Autodesk\acad2000
  3. Boot your computer into Safe Mode using these instructions
  4. Once in Windows Safe Mode, start the Longbow Converter tool, select the 2nd tab “Old AutoCAD Installer Reviver“, pick the c:\Autodesk\acad2000 folder, and click Run. Read and understand all the prompts before pressing OK.
    1. Once the setup starts, stop and read the next step…
  5. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acad2000 (not .\AutoCAD 2000 as usually prompted)**
  6. Now carry on with the install (do not reboot once the install is complete). Ignore any errors related to not being able to create the shortcut, you will have to create a shortcut on your computer Desktop to your c:\acad2000\acad.exe by hand.
    1. Do not reboot if prompted to do so
  7. Once installed, go back to the Converter tool, select the 3rd tab, pick the newly installed c:\acad2000 folder and click “Fix”.
  8. Now reboot your computer back into normal Windows mode
  9. Open Windows Explorer, navigate to c:\acad2000 and run acad.exe – you can now happily run your AutoCAD 2000 on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit

Installing AutoCAD 2000 Service Pack 1

  1. Download AutoCAD 2000 sp1 from here
  2. Unzip your newly downloaded sp to folder path c:\Autodesk\sp
  3. Start the Converter, select the 2nd tab, pick the c:\Autodesk\sp\AutoCAD 2000 sp1 folder and click ‘Run’
  4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal

Installing AutoCAD 2000 Service Pack 2

  1. Download AutoCAD 2000 sp2 from here
  2. Unzip your newly downloaded sp to folder path c:\Autodesk\sp
  3. Start the Converter, select the 2nd tab, pick the c:\Autodesk\sp\AutoCAD 2000 sp2 folder and click ‘Run’
  4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal.
Copyright 2016 (c) Longbow Software

AutoCAD 32bit/64bit side-by-side installation compatibility chart

Posted on by

This blog has been written to help advise those who require 32bit versions of AutoCAD to reside on the same computer system as 64bit versions of AutoCAD.

Before we start, when installing 32bit AutoCAD on 64bit Windows, you should take care not to mix the same version/series of AutoCAD 32bit with the same version/series of the corresponding 64bit version of AutoCAD, on the same computer. The reason is that they were not designed to run in a side-by-side configuration and therefore may conflict. The same rule can generally be made for all Autodesk products.

NOTES:

  • When installing 32bit AutoCAD, we advise that you uninstall all previous versions of 64bit AutoCAD before installing your 32bit version of AutoCAD.
  • If you are installing multiple versions of AutoCAD, you should always install in chronological order, in other words, oldest to newest.
    • e.g AutoCAD 2004, Architecture 2004, Map 2005, AutoCAD 2007, Civil3d 2015
    • Failure to follow this simple rule can render you with missing entry point errors, un-explained crashing, un-installable Autodesk software and more.
  • For best results, we recommend that you install only 32bit versions of AutoCAD on your computer system, however, mixing is possible with care – refer to the chart below if you must have the 64bit version installed on the same computer.

This chart shows which 32bit AutoCAD versions can be installed on the same system as 64bit AutoCAD versions…

  • Green means Should be OK
  • Red/Dark Red means Problems will occur, you should not do this

AutoCAD 32bit 64bit side by side configurations

Shows which versions of 32bit AutoCAD can be installed side by side to 64bit versions of AutoCAD

Copyright 2015 (c) Longbow Software