Installing 64bit AutoCAD LT 2014 on Windows 7, Windows 8 and Windows 10

Posted on by

AutoCAD LT 2014 was not designed to run in Windows 10 (Windows 10 was released after AutoCAD LT 2014) and inevitably you will run into issues such as the infamous Ribbon crashing issue, slow startup problems, text scaling issues, etc.

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD LT 2014 installation so that you can be up and running again… Just follow these easy instructions:

How to install 64bit AutoCAD LT 2014

  1. First, uninstall any existing AutoCAD LT 2014 installations on your computer
  2. Next, obtain the Longbow Converter App (V11.15 or higher), download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using your mouse, right-click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter“
    3. Next, using the “. . .“  button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the AutoCAD installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!“
  5. Now you can run your AutoCAD as normal

Installing AutoCAD LT 2014 sp1

Troubleshooting

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2020 (c) Longbow Software

Installing QuickCAD V4 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing Autodesk QuickCAD V4 on WIndows 7, Windows 8 and Windows 10 (both 32bit and 64bit) can be very easily defined in these short steps…

  1. First, you need to purchase a copy of the Longbow Reviver tool here
  2. Using Windows Explorer, backup your entire QuickCAD V4 installation CD to your hard drive, to a folder path c:\InstallCDs\QuickCAD V4
  3. Start the Longbow Reviver tool
    1. select the 1st tab “Old Installer Reviver“
    2. then using the ‘…’ button pick the  c:\InstallCDs\QuickCAD V4 folder
    3. Now click the ‘Fix and Run Old Installer’ button
    4. Read and understand all the prompts that appear, then continue by clicking OK.
      1. The tool will now start initializing the setup interface, and may take up to 45 minutes to start. Please be patient…
    5. Once the QuickCAD V4  setup appears, install as normal *except* when prompted for the installation path, set it to c:\QuickCAD e.g.

      Setting the QuickCAD installation path to c:\QuickCAD

      Setting the QuickCAD installation path to c:\QuickCAD


    6. Once the setup is complete
      1. uncheck ‘Run QuickCAD’
      2. Do not reboot if prompted to do so
  4. Now QuickCAD V4 is installed
    1. Make sure the QuickCAD V4 setup is completely closed, then in the Longbow Reviver tool…
    2. Select the 2nd tab “Old Program Reviver“
    3. Using the ‘…’ button, pick the newly installed C:\QuickCAD folder
    4. next, click ‘Fix Old Program’
    5. Say ‘No’ if the Reviver tool asks if you want to re-register…
  5. Now you can happily run your QuickCAD V4 on Windows 7, Windows 8 or Windows 10!

Copyright 2018 (c) Longbow Software

Installing 32bit AutoCAD Mechanical 2010 on Windows 7, Windows 8 and Windows 10 64bit

Posted on by

NOTE: This blog post specifically solves issues related to these error messages on installation…

  • “This operating system is not supported by AutoCAD Mechanical® 2010”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD Mechanical® 2010. It cannot be installed on 64-bit Windows”

Installing AutoCAD Mechanical 2010 (MDT 2010) 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. If you have CDs (if not check (3) below):
    1. Insert your AutoCAD MDT 2010 CD into your CDRom drive, cancel setup if it starts
    2. Next, start the Converter App
    3. Select the 1st tab in the Converter tool named “32bit AutoCAD Installer Converter“
    4. Using the “…” button pick the path to your AutoCAD MDT 2013 CD
    5. Now click the “Convert” button and follow the instructions.
    6. (Skip to step 4)
  3. If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Mech_2010_English_Win_32bit.exe
    1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\MDT2010), now click OK.
    2. Wait until all of the files have extracted, when they do, the AutoCAD MDT 2013 setup will automatically launch – simply close it and move to the next step.
    3. Now, start the Longbow Converter tool
    4. select the 1st tab titled “AutoCAD 32bit Installer Converter“
    5. pick the c:\Autodesk\MDT2010 folder
    6. and click the “Convert…” button.
  4. Once the conversion process is complete, click the “Install/Run Setup” button to start setup.
    1. Install as normal!
  5. Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter
    1. select the 3rd tab named “Old AutoCAD Program Reviver“
    2. pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Mechanical 2010 folder
    3. then click “Fix Old Program”
  6. Now you can happily run your AutoCAD MDT 2010 32bit on Windows 7, Windows 8 and Windows 10!

Installing AutoCAD MDT 2010 Service Pack 2

  1. Here’s sp2 – AutoCAD Mechanical 2010 sp2 – install as normal

Troubleshooting:

  1. If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
  2. if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
  3. If your AutoCAD crashes while interacting with the Ribbon click here
  4. If you are unable to activate your product, or the activation process crashes:
    1. Try uninstalling the July 2014 Microsoft security update
    2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
  5. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
  6. If your Windows hangs on startup after installing please refer to this help blog
Copyright 2017 (c) Longbow Software

Installing Autodesk Land Desktop 2006 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD LDT 2006 on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here
  2. Start In the Converter tool
    1. Next, click the File menu’s “Backup CD to Disk”
    2. Follow the prompts
  3. Once the backup is completed
    1. click the Run Old Installer button… Read and understand all the prompts before pressing OK.
    2. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, with these exceptions… (if you cannot move past the first screen in the setup, see Trouble Shooting below)…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\ldt2006 (not C:\Program Files (x86)\Autodesk Land Desktop 2006 that is defaulted)**.
    3. If asked to reboot after the install, say NO
  5. Once installed, do not reboot, make sure you fully close the AutoCAD setup program (because the Converter is waiting for the setup program to fully close) then go back to the Converter tool, select the 3rd tab, pick the newly installed c:\ldt2006 folder and click the Fix Old Program button.
  6. Now you can run your Autodesk LDT 2006 on Windows 7, Windows 8 and Windows 10, both 32bit and 64bit.
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues“, simply click “Don’t show this message again” and then click “Run the Program…“

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes immediately on startup:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2017 (c) Longbow Software

Installing AutoCAD Mechanical Desktop 5 on Windows 7, Windows 8 and Windows 10

Posted on by

How to install AutoCAD MDT 5 on Windows

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

I recommend that you follow these steps precisely so to eliminate the risk of something going wrong with the install…
  1. Obtain your copy of the Longbow Converter here
  2. Insert your MDT 5 CD into your computer
  3. Start the Longbow Converter tool
    1. Select the 2nd tab named “Old AutoCAD Installer Reviver”
    2. Using the “. . .” button, pick your MDT 5 CD, and click Run and follow the Converter’s instructions.
    3. Once the MDT 5 setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\mdt2000i (not Program Files (x86)\Mechanical Desktop 5 as usually prompted by default)**
  5. Once installed, go back to the Converter tool
    1. select the 3rd tab named “Old AutoCAD Program Reviver”
    2. Using the ‘. . .’ button
      1. pick the newly installed c:\mdt2000i folder
      2. click “Fix Old Program“.
  6. Now, you can happily run your MDT 5 on Windows 7, Windows 8 and Windows 10
Troubleshooting:
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
Copyright 2018 (c) Longbow Software

Installing 64bit AutoCAD Architecture 2014 on Windows 10 64bit

Posted on by

AutoCAD Architecture 2014 was not designed to run in Windows 10 (Windows 10 was released after ADT 2014) and inevitably you will run into issues such as the infamous Ribbon crashing issue, slow startup problems, text scaling issues, etc.

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the ADT 2014 installation so that you can be up and running again… Just follow these easy instructions:

How to install 64bit AutoCAD Architecture 2014

  1. First, uninstall any existing ADT 2014 installations on your computer
  2. Next, obtain the Longbow Converter App download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using your mouse, right-click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter“
    3. Next, using the “. . .“  button…
      1. select your ADT installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the ADT installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!“
  5. Now you can run your Architecture as normal

Installing AutoCAD Architecture 2014 sp1

Install ADT 2014 sp1 as normal

Troubleshooting

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2020 (c) Longbow Software

Installing 64bit AutoCAD LT 2013 on Windows 10 64bit

Posted on by

Your 64bit AutoCAD LT 2013 was never designed to run in Windows 10 (this version of Windows is newer than AutoCAD LT 2013). In order for your AutoCAD LT 2013 to run as it did in previous versions of Windows, you need to follow these easy steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Make sure all previous installed versions of AutoCAD 2013 are uninstalled first.
  2. Obtain your copy of the Longbow Converter here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using your mouse, right click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter“
    3. Next, using the “…” button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.

      NOTE: If the Converter does not recognize your because it is a single self extracting exe downloaded from Autodesk called something like AutoCAD_LT_2013_English_Win_64bit.exe, simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\AutoCADLT2013), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD LT 2013 setup will automatically launch – simply close it and move to the next step.

  4. Once you have completed the AutoCAD installation process…
    1. close the setup program then start the Converter software
    2. Select the 3rd tab “Old AutoCAD Program Reviver”
      1. Using the “…” button, pick the newly installed C:\Program Files\Autodesk\AutoCAD LT 2013 folder
      2. then click “Fix Old Program“
  5. Next install the AutoCAD LT 2013 sp2 from here
  6. Now you can happily run your AutoCAD LT 2013 64bit on Windows 10

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2017 (c) Longbow Software

Installing 32bit AutoCAD Mechanical 2009 on Windows 7, Windows 8 and Windows 10 64bit

Posted on by

NOTE: This blog post specifically solves issues related to these error messages on installation…

  • “This operating system is not supported by AutoCAD Mechanical® 2009”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD Mechanical® 2009. It cannot be installed on 64-bit Windows”

Installing AutoCAD Mechanical 2009 (MDT 2009) 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. If you have CDs (if not check (3) below):
    1. Insert your AutoCAD MDT 2009 CD into your CDRom drive, cancel setup if it starts
    2. Next, start the Converter App
    3. Select the 1st tab in the Converter tool named “32bit AutoCAD Installer Converter“
    4. Using the “…” button pick the path to your AutoCAD MDT 2013 CD
    5. Now click the “Convert” button and follow the instructions.
    6. (Skip to step 4)
  3. If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Mech_2009_English_Win_32bit.exe
    1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\MDT2009), now click OK.
    2. Wait until all of the files have extracted, when they do, the AutoCAD MDT 2013 setup will automatically launch – simply close it and move to the next step.
    3. Now, start the Longbow Converter tool
    4. select the 1st tab titled “AutoCAD 32bit Installer Converter“
    5. pick the c:\Autodesk\MDT2009 folder
    6. and click the “Convert…” button.
  4. Once the conversion process is complete, click the “Install/Run Setup” button to start setup.
    1. Install as normal!
  5. Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter
    1. select the 3rd tab named “Old AutoCAD Program Reviver“
    2. pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Mechanical 2009 folder
    3. then click “Fix Old Program”
  6. Now you can happily run your AutoCAD MDT 2009 32bit on Windows 7, Windows 8 and Windows 10!

Installing AutoCAD MDT 2009 Service Pack 3

  1. Here’s sp3 – AutoCAD Mechanical 2009 sp3 – install as normal

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2017 (c) Longbow Software

Uninstalling all Autodesk Products from your Computer

Posted on by

Here’s a good one for you. We added a new tool in our Longbow Converter App which allows you to uninstall all Autodesk products from your computer in one go…

  1. Obtain your copy of the Longbow Converter here
  2. Start the Converter tool
  3. Click the Tools->Advanced->Uninstall all Autodesk Products menu…

    Uninstall All Autodesk Products

    Uninstall All Autodesk Products

  4. The Converter will now list all of the Autodesk products installed on your computer, you can press F5 to refresh. Select which ones you want to be uninstalled, then click Uninstall/Clean

    Uninstall and Clean

    Uninstall and Clean

  5. Note that you will have to interact with the setups, but the software does a really good job of cleaning everything off.

Copyright 2017 (c) Longbow Software

Installing 64bit AutoCAD 2015 on Windows 10 64bit

Posted on by

AutoCAD 2015 was not designed to run in the latest releases of Windows 10 and inevitably you will run into issues such as the infamous Ribbon crashing issue, slow startup problems, text scaling issues, etc.

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2015 installation so that you can be up and running again… Just follow these easy instructions:

How to install 64bit AutoCAD 2015

  1. First, uninstall any existing AutoCAD 2015 installations on your computer
  2. Next, obtain the Longbow Converter App (V11.15 or higher), download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using your mouse, right-click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter“
    3. Next, using the “. . .“  button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the AutoCAD installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!“
  5. Now you can run your AutoCAD as normal

Troubleshooting:

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2018 (c) Longbow Software

Installing 64bit AutoCAD 2014 on Windows 10 64bit

Posted on by

AutoCAD 2014 was not designed to run in Windows 10 (Windows 10 was released after AutoCAD 2014) and inevitably you will run into issues such as the infamous Ribbon crashing issue, slow startup problems, text scaling issues, etc.

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2014 installation so that you can be up and running again… Just follow these easy instructions:

How to install 64bit AutoCAD 2014

  1. First, uninstall any existing AutoCAD 2014 installations on your computer
  2. Next, obtain the Longbow Converter App (V11.15 or higher), download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using your mouse, right-click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter“
    3. Next, using the “. . .“  button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the AutoCAD installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!“
  5. Now you can run your AutoCAD as normal

Installing AutoCAD 2014 sp1

Troubleshooting:

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2018 (c) Longbow Software

Making the Calcomp Digitizer work in old versions of AutoCAD

Posted on by

Some users have experienced issues where their Calcomp Digitizer works just fine in new versions of AutoCAD (like AutoCAD 2009, but doesn’t work on older versions of AutoCAD (like AutoCAD 2000) even though both versions are installed on the same computer.

We have reports that simply disabling the Windows User Access Control  (UAC) seems to fix this issue!

Before you disable UAC – read all about UAC here

Click here to Disable UAC

Copyright 2017 (c) Longbow Software

 

Visual Basic Applications run very slow in AutoCAD 64bit

Posted on by

If you use VBA inside of 32bit AutoCAD you will have noticed that it is around 1000x times slower when running the same VBA code inside of 64bit AutoCAD.

This is because AutoCAD 64bit ships with the 32bit VBA DLL in a separate out-of-process executable rather than loading the VBA DLL inside of AutoCAD itself. Therefore, a lot of marshaling is incurred communicating between the out-of-process VBA executable and 64bit AutoCAD.

Other issues you may be seeing: Run-time error ‘429’: ActiveX component can’t create object

Affected, all 64bit versions of (and variants of)

  • AutoCAD 2008 | AutoCAD 2009 | AutoCAD 2010
  • AutoCAD 2011 | AutoCAD 2012 | AutoCAD 2013
  • AutoCAD 2014 | AutoCAD 2015
  • AutoCAD 2016 | AutoCAD 2017
  • AutoCAD 2018
  • AutoCAD 2019
  • NOTE: Autodesk stopped making 32bit AutoCAD since AutoCAD 2020

The solution to slow running AutoCAD VBA

The best solution is to install 32bit AutoCAD on 64bit Windows, here are the affected versions along with their solution text…

AutoCAD VBA Enabler downloads

AutoCAD VBA enabler modules can be downloaded using the links below…

AutoCAD 2010 VBA 32bit 64bit | AutoCAD 2011 VBA 32bit 64bit | AutoCAD 2012 VBA 32bit 64bit | AutoCAD 2013 VBA 32bit 64bit | AutoCAD 2014 VBA 32bit 64bit | AutoCAD 2015 VBA 32bit 64bit | AutoCAD 2016 VBA 32bit 64bit | AutoCAD 2017 VBA 32bit 64bit | and newer

Copyright 2023 (c) Longbow Software

Run Adobe Acrobat X plugin in 32bit AutoCAD on Windows 7, Windows 8 and Windows 10 64bit

Posted on by

The Adobe Acrobat X plugin for AutoCAD only runs on 32bit AutoCAD, and 32bit AutoCAD only runs on 32bit Windows. This means that you will be stuck if you require the Adobe Acrobat X plugin for AutoCAD and move to newer hardware with 64bit Windows.

The Solution:  

Click on one of the links below to see how to install 32bit AutoCAD on 64bit Windows and then be able to install Adobe Acrobat X plugin.

Copyright 2017 (c) Longbow Software

 

 

Installing Corel Print House Magic on Windows 7, Windows 8 and Windows 10

Posted on by

Installing Corel Print House Magic on WIndows 7, Windows 8 and Windows 10 (both 32bit and 64bit) can be very easily defined in these short steps…

  1. First, you need to purchase a copy of the Longbow Reviver tool here
  2. Using Windows Explorer, copy your entire Corel Print House Magic installation CD to your hard drive, to a folder path c:\InstallCDs\CorelPrintHouseMagic
  3. Start the Longbow Reviver tool
    1. select the 1st tab “Old Installer Reviver“
    2. then using the ‘…’ button pick the  c:\InstallCDs\CorelPrintHouseMagic folder
    3. Now click the ‘Fix and Run Old Installer’ button
    4. Read and understand all the prompts that appear, then continue by clicking OK.
    5. Install Corel Print House Magic as normal
    6. Do not reboot if prompted to do so
  4. Now Corel Print House Magic is installed
    1. Make sure the Corel Print House Magic setup is completely closed, then in the Longbow Reviver tool…
    2. Select the 2nd tab “Old Program Reviver“
    3. Using the ‘…’ button, pick the newly installed c:\Coral folder
    4. and click ‘Fix Old Program’
    5. Say ‘No’ if the Reviver tool asks if you want to re-register…
  5. Now you can happily run your Corel Print House Magic on Windows 7, Windows 8 or Windows 10!

Copyright 2017 (c) Longbow Software

Installing Borland Delphi 3.0 on Windows 7, Windows 8 and Windows 10

Posted on by

If you are trying to install Borland Delphi 3 on Windows 7, 8 or Windows 10 64bit you are probably running into one of these problems…

This app can't run on your PC. To find a version that runs with your PC check with the publisher

This app can’t run on your PC. To find a version that runs with your PC check with the publisher.

Unsupported 16-bit Application - the program or feature cannot start or run due to incompatibility with 64-bit versions of WIndows

Unsupported 16-bit Application – the program or feature cannot start or run due to incompatibility with 64-bit versions of Windows

Luckily, the Longbow Reviver tool can solve this, here’s what you need to do:

  1. Obtain your copy of the Longbow Reviver tool here
  2. Backup your Borland Delphi 3 CD to your Desktop, in a “Delphi 3” folder
  3. Next, start the Longbow Reviver tool and select the “Old Installer Reviver” tab
    1. Using the “…” button select the path to the Desktop\Delphi 3\install folder…

      Selecting the Backup Copy of the Delphi 3 CD on your hard drive

      Selecting the Backup Copy of the Delphi 3 CD on your hard drive

    2. Once you have that selected, click OK and then pick the “Fix and Run Old Installer” button.
    3. Now, be patient, the process for initializing the Delphi 3 setup may take over an hour…
      1. Look out for a folder called _ISTMP0.DIR being created in the install folder, if it’s not there in an hour, restart your computer and try again…
      2. The _ISTMP0.DIR should slowly fill with about 21 files before the setup appears.
  4. Once your Delphi 3 setup appears
    1. step through the setup dialogs as normal until you get to the “Select Directories” dialog
    2. Here, make sure you change the Root folder to c:\Borland (instead of c:\Program Files (x86)\Borland)

      e.g.

      Update the Borland Root pathto c:\Borland

      Update the Borland Root pathto c:\Borland

    3. Make sure they are setup like this…

      Updated the Borland Root path

      Updated the Borland Root path

    4. Now carry on and install as normal until complete
    5. Be patient, it takes a while to complete…
  5. Once the install is complete
    1. make sure the Delphi 3 setup is shutdown.
    2. Go back to the Reviver tool and select the 2nd tab named “Old Program Reviver“
    3. Using the ‘…’ button, pick the newly installed c:\Borland folder
    4. Then pick the “Run Old Program” button
  6. Now your Delphi 3 should be up and running…

Copyright 2017 (c) Longbow Software

AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)

Posted on by

If your AutoCAD is hanging as soon as it starts (with no Ribbon visible) as shown below…

AutoCAD 2010 Freeze on startup

AutoCAD 2010 Freeze on startup

…then try these steps to fix the problem…

  1. Obtain your copy of the Longbow Converter here
  2. Select the 3rd tab named “Old AutoCAD Program Reviver“
  3. Pick the “…” button to select your AutoCAD install folder. (for example C:\Program Files\AutoCAD 2010)
    1. next, click “Fix Old Program”
  4. Try your AutoCAD now, it should be fixed.

Copyright 2017 (c) Longbow Software

Interactions with the AutoCAD Ribbon crashes AutoCAD on Windows 10 (Solved)

Posted on by

Users complain of “autocad crashes when clicking anything” and “autocad crashing when using ribbon”

It seems that a new Computers with the latest version of Windows 10 or computers that recently ran Windows Update for Windows 10 has caused Ribbon crashing issues with AutoCAD versions…

  • AutoCAD 2012
  • AutoCAD 2013
  • AutoCAD 2014
  • AutoCAD 2015

AutoCAD starts up, but any interactions with AutoCAD’s Ribbon, Status bar, or Right clicking the Command line causes AutoCAD to crash out instantly with:

Error: Unhandled Exception

We found that this issue is caused by the new .NET 4.7 update.

This update came down as part of KB3186568 and comes as standard in Windows 10 Creators Update (version 1703). Uninstalling all of the affected Windows Updates is not a solution because they are eventually forced down by Microsoft; besides Windows updates usually have security updates which stop hackers from gaining access to your computer so they should always be installed.

Fix AutoCAD Ribbon Crash

We have just released an update to fully fix this issue so you can once again rely on Windows Updates. We have solved this problem via our Longbow Converter App, you will need V11.18 or newer. Here’s what you need to do:

  1. Obtain your copy of the Longbow Converter App here
  2. Start the Converter App
    1. In the Converter App pick the 3rd tab named “Old AutoCAD Program Reviver“
    2. Using the “. . .” button select the path to your problem AutoCAD
    3. Now click the “Fix Old Program“.
    4. Close the Converter App
  3. Now run AutoCAD as normal, Ribbon crash is solved.

Troubleshooting

To see which Windows Updates you have installed

  1. Right Click the Windows Start Menu in the bottom right and pick “Programs and Features”

    Select Programs and Features by Right-clicking the Windows 10 Start Menu

    Select Programs and Features by Right-clicking the Windows 10 Start Menu

  2. Click on “View Installed Updates” in the top left…

    Go to View installed Updates

    Go to View installed Updates

Detecting your installed version of Windows 10

  1. Right Click the Windows Start Menu in the bottom right and pick “Run“
  2. Type “Winver” then Enter
Copyright 2019 (c) Longbow Software

Installing 32bit AutoCAD Architecture 2013 on Windows 7, Windows 8 and Windows 10

Posted on by

NOTE: This blog post specifically solves issues related to these error messages on installation…

  • “This operating system is not supported by AutoCAD® Architecture® 2013”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD® Architecture® 2013. It cannot be installed on 64-bit Windows”

Installing AutoCAD Architecture 2013 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Make sure all previous installed versions of AutoCAD 2013 are uninstalled first.
  2. Obtain your copy of the Longbow Converter here
  3. If you have CDs (if not check (3) below):
    1. Using Windows Explorer, backup/copy Disk 1 of your ADT 2013 CD to your hard drive, to a folder path c:\Autodesk\ADT2013
    2. If you have more CD’s, backup/copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\ADT2013 folder
  4. If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Arch_2013_English_Win_32bit.exe
    1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\ADT2013), now click OK. Wait until all of the files have extracted, when they do, the ADT 2013 setup will automatically launch – simply close it and move to the next step.
  5. Now, start the Longbow Converter tool
    1. select the 1st tab titled “AutoCAD 32bit Installer Converter“
    2. pick the c:\Autodesk\ADT2013 folder
    3. and click the “Convert…” button..
      1. Simply install as normal.Once the conversion process is complete, click the “Install/Run Setup” button to start setup.
  6. Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter
    1. select the 3rd tab named “Old AutoCAD Program Reviver“
    2. pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Architecture 2013 folder
    3. then click “Fix Old Program”
  7. Now you can happily run your AutoCAD Architecture 2013 32bit on Windows 7, Windows 8 and Windows 10!

Installing ADT 2013 Service Packs

There are 2 sp’s for AutoCAD Architecture 2013, these are the the 32bit versions of the sp’s

  1. Here’s sp1 – AutoCAD Architecture 2013 sp1 – install as normal
  2. Here’s sp2 – AutoCAD Architecture 2013 sp2 – install as normal

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2017 (c) Longbow Software

AutoCAD 2000 Proxy dialog warnings

Posted on by

If you are seeing a message like this while opening DWG files using AutoCAD 2000…

“The last command created proxy objects and proxy entities to represent original objects and entities whose parent ARX application(s) are currently not loaded.”

It’s because you are missing the AutoCAD 2000 service packs. You need to install AutoCAD 2000 sp1 and then AutoCAD 2000 sp2, as described half way down on this page Installing AutoCAD 2000 on Windows 7, Windows 8 and Windows 10

Copyright 2017 (c) Longbow Software

Installing AutoCAD R14 Express Tools Volume 6 on Windows 7, Windows 8 and Windows 10

Posted on by

If you are having trouble installing AutoCAD R14 Express Tools with “This app cannot run on your PC” then read on…

Installing AutoCAD R14 Express Tools Volume 6 (et1-6.exe) on Windows 7, Windows 8, Windows 8.1 and Windows 10 32bit or 64bit can be very easily defined in these short steps.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

  1. Obtain your copy of the Longbow Converter here
  2. Next, make sure you have AutoCAD R14 already installed – follow these steps Installing AutoCAD R14 on Windows 7, Windows 8, Windows 8.1 and Windows 10
  3. Unzip this zip to c:\Autodesk
  4. Start the Longbow Converter tool
    1. select the 2nd tab named “Old AutoCAD Installer Reviver“,
    2. pick the newly created c:\Autodesk\Express Tools R14 Volume 6 folder
    3. now click the “Run Old installer” button.
    4. Read and understand all the prompts before pressing OK.
  5. Now, I know it’s unheard of these days, but at this point expect to wait up to 45 minutes for your AutoCAD R14 Express Tools setup.exe program to fully appear. Once the setup starts, stop and read the next step…
  6. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acadR14 (not Program Files (x86)\AutoCAD Express Tools as usually prompted)**
    1. Do not reboot if prompted to do so
  7. Now you can happily run your Express Tools inside of AutoCAD R14 running on Windows 7, Windows 8 and Windows 10 –  using Windows Explorer, simply navigate to c:\acadr14 and double click acad.exe to start AutoCAD R14 and to use Express Tools R14

Troubleshooting:

  • If your Express Tools R14 setup is not starting after 45 minutes, try rebooting, then restart the steps above. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try the same steps as above in Windows Safe Mode
Copyright 2017 (c) Longbow Software

Quick start join.me to host a Technical Support Netmeeting

Posted on by

There’s this really cool and easy tool on the web called join.me, it allows you to quickly share your screen with someone over the internet. It’s particularly handy for issues where your computer needs direct Technical Support.

Here’s how to host a meeting **quickly** with join.me…

  1. Navigate to the join.me website by clicking on this link
  2. Next, click on the Get Started icon…

    Click the GET STARTED button

    Click the GET STARTED button

  3. Next…
    1. Enter your email
    2. A password
    3. then read and check the Accept the terms toggle
  4. Now join,me will try and gain information about you, simply click ‘SKIP‘ at the bottom of each prompt…

    Simply 'Skip' Join.me data mining

    Simply ‘Skip’ Join.me data mining

  5. Once you have skipped each page and have reached the ‘YOU”RE READY TO GO‘ page
    1. click the ‘DOWNLOAD JOIN.ME‘ button to download and run the join.me.exe (make sure you allow it to download, and once downloaded make sure you run it)

      Download Join.me

      Download Join.me

  6. At this point, if all is well, you will see a popup window stating that Join.me is starting…
  7. Once started, you will see like a join.me toolbox at the top center of your desktop
    1. select one-time code
    2. then click on the circular start triangle..
  8. Next, join.me will start the meeting and present you with a code – click the “Copy Link” button and paste the link to your Support Technician so he can see your screen.

Copyright 2017 (c) Longbow Software

Installing 64bit AutoCAD 2010 on Windows 7, Windows 8 and Windows 10 64bit

Posted on by

If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)

Your 64bit AutoCAD 2010 was never designed to run in Windows 10, Windows 8 or Windows 8.1 64bit (these versions of Windows are newer than AutoCAD 2010) – you may see random crashing, hanging on startup and/or slow performance…

NOTE: If you are running VBA macros in AutoCAD and they are running extremely slowly, you can gain up to 1000x better performance by installing the 32bit version of AutoCAD 2010 on 64bit Windows 

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain the Longbow Converter App (V11.15 or higher), download here
  2. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using your mouse, right click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter“
    3. Next, using the “…” button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  3. Once you have completed the AutoCAD installation process…
    1. close the setup program then start the Converter software
    2. Select the 3rd tab “Old AutoCAD Program Reviver”
      1. Using the “…” button, pick the newly installed C:\Program Files\Autodesk\AutoCAD 2010 folder
      2. then click “Fix Old Program“
  4. Now you can happily run your AutoCAD 2010 64bit on Windows 8 and Windows 10

Troubleshooting:

  1. If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
  2. if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
  3. If your AutoCAD crashes while interacting with the Ribbon click here
  4. If you are unable to activate your product, or the activation process crashes:
    1. Try uninstalling the July 2014 Microsoft security update
    2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
  5. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
  6. If your Windows hangs on startup after installing please refer to this help blog
Copyright 2017 (c) Longbow Software

Opening AutoCAD DWG file gives “Drawing File was created by an incompatible version” message

Posted on by

If you are trying to open a DWG file with AutoCAD and you get the message “Drawing File was created by an incompatible version” it’s because somewhere along the line your AutoCAD DWG files were saved with a newer version of AutoCAD.

All is not lost, you can make them open again in your version of AutoCAD, you just need to download the free DWGTrueView App from Autodesk – http://www.autodesk.com/products/dwg/viewers

Once installed, start DWGTrueview and open the DWG file in question, then save as making sure to select the lowest DWG file version that matches your version of AutoCAD.

Copyright 2017 (c) Longbow Software

Installing 32bit AutoCAD 2013 on Windows 7, Windows 8 and Windows 10

Posted on by

These instructions solve issues around installing/running your old AutoCAD 2013 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

  • “This operating system is not supported by AutoCAD® 2013”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD® 2013. It cannot be installed on 64-bit Windows”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2013 installation so that you can be up and running again… Follow these instructions:

How to install AutoCAD 2013

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Converter App and note the user interface
  3. Select the 1st tab named “AutoCAD 32bit Installer Converter“
    1. Using the “. . .” button, selection your AutoCAD installation CD
    2. Next, click the “Convert“ button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Close the setup program when the installation is complete.
      2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  5. Now run your AutoCAD as normal

Installing AutoCAD 2013 Service Packs

There are 2 sp’s for AutoCAD 2013, these are the the 32bit versions of the sp’s

  1. Here’s sp1 –AutoCAD 2013 sp1 – install as normal
  2. Here’s sp2 – AutoCAD 2013 sp2 – install as normal

Troubleshooting

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2019 (c) Longbow Software