Tag Archives: This program has compatibility issues

Installing AutoCAD Architecture 2009 32bit on Windows 7, Windows 8 and Windows 10

Posted on by

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD ADT 2009…

  • “This operating system is not supported by AutoCAD® Architecture® 2009”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD® Architecture® 2009. It cannot be installed on 64-bit Windows”

How to install AutoCAD ADT 2009

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start In the Converter App and note the user interface
  3. Select the 1st tab named “AutoCAD 32bit Installer Converter“
    1. Using the “. . .” button, selection your AutoCAD installation CD
    2. Next, click the “Convert“ button and follow instructions
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Simply install as normal, remembering to…
      1. Close the setup program when the installation is complete.
      2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  5. Now run your AutoCAD as normal

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way

Installing ADT 2009 Service Packs

We recommend that you download and install the latest Service Packs from Autodesk which can be found here. Update 3 contains Update 1 and 2 also.

Troubleshooting

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2019 (c) Longbow Software

Installing 64bit AutoCAD LT 2010 on Windows 8 and Windows 10 64bit

Posted on by

Your 64bit AutoCAD LT 2010 was never designed to run in Windows , Windows 8 or Windows 10 64bit (these versions of Windows are newer than AutoCAD LT 2010). In order for your AutoCAD LT 2010 to run as it did in previous versions of Windows, you need to follow these easy steps…

How to install 64bit AutoCAD LT 2010

  1. First, uninstall any existing AutoCAD 2010 installations on your computer
  2. Next obtain a copy of the Longbow Converter App, download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using your mouse, click the “32bit” button in “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter“
    3. Next, using the “. . .“  button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the AutoCAD installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!“
  5. Now you can run your AutoCAD as normal

Troubleshooting

  1. If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
  2. if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
  3. If your AutoCAD crashes while interacting with the Ribbon click here
  4. If you are unable to activate your product, or the activation process crashes:
    1. Try uninstalling the July 2014 Microsoft security update
    2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
  5. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
  6. If your Windows hangs on startup after installing please refer to this help blog
Copyright 2020 (c) Longbow Software

Installing Autodesk Land Desktop 2004 on Windows 7, Windows 8 and Windows 10

Posted on by

NOTE: We currently only support US unlocked versions of 2004 on 64bit OS. European or locked US support 2004 is limited only to 32bit Windows 7, 8 and Windows 10.

Follow these instructions to solve issues around installing/running your old AutoCAD 2004 on newer versions of 64bit Windows 7, Windows 8 and Windows 10

How to install Autodesk LDT 2004 

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Longbow Converter tool
    1. Insert your AutoCAD CD into your CDRom drive
    2. Select the 2nd tab named “Old AutoCAD Installer Reviver“
    3. Using the “…” button, path the to your AutoCAD CD
    4. Click “Run Old Installer”
      1. Read and follow all the prompts
      2. Once the AutoCAD setup starts, stop and read the next step…
  3. In the AutoCAD setup program, navigate through each setup dialog as normal, with these exceptions…
    1. Problem NOTES:
      1. if you cannot move past the first screen in the setup, see Trouble Shooting below
      2. When you click the Install link from your  AutoCAD setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. When you arrive at the installation folder path setup dialog…
      1. **it’s vitally important to make sure you install to c:\ldt2004 (not Program Files (x86)\Autodesk Land Desktop 2004)**.
    3. While installing…
      1. If you see an error in install “.NET Runtime Optimization Service has stopped working” – simply ignore by clicking the “Close Program” button
      2. Do not reboot if asked to do so
    4. Once installed
      1. Do not reboot if asked to do so
      2. Make sure to fully close the setup program when the installation is complete.
      3. Back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  4. Finally, reboot your PC and run your AutoCAD as normal
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues”
      1. Click “Don’t show this message again”
      2. then click “Run the Program…”

Installing Autodesk LDT 2004 Sp1

  1. Download LDT 2004 sp2 from here 
    1. Copy the file into c:\Autodesk\sp
  2. Start the Converter
    1. Select the 3rd tab named “Old AutoCAD Program Reviver“
    2. Pick the c:\Autodesk\sp folder
    3. Now click the Fix Old Program button.
    4. Install as normal

 

Troubleshooting

– If you are unable to activate your product, or the activation process crashes immediately on startup:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2019 (c) Longbow Software

Installing AutoCAD Mechanical 2008 from Inventor Series 2008 CD on Windows 10, Windows 7, Windows 8 and Windows 8.1

Posted on by

NOTE: This solution only works with an Autodesk Inventor Series 2008 installation media.

Installing Mechanical 2008 from Inventor Series 2008 CD on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…
NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.
  1. Obtain your copy of the Longbow Converter here
  2. Copy your Inventor Series 2008 CD to your hard drive, to a folder path c:\Autodesk\CDs\InventorSeries2008 
    1. IMPORTANT: If you have more than one CD, copy them all to the same c:\Autodesk\CDs\InventorSeries2008 folder – overwriting any existing files and folders.
  3. Start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\CDs\InventorSeries2008 folder.
  4. The Converter will say that the media is not fully supported; simply click the Tools->Manual MSI Correction menu option
  5. Once the conversion process is completed, click the “Run Setup/Install AutoCAD…” button to bring up your Inventor 2008 setup program as normal.
    1. Un-check all install options except AutoCAD Mechanical 2008
    2. Install as normal
  6. Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\MDT 2008 folder, then click “Fix“
  7. Now you can happily run your AutoCAD Mechanical 2008 on Windows 10, Windows 7 or Windows 8.

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs please read this blog entry on the File->Open or File->Save Crash in Autodesk Products

Copyright 2016 (c) Longbow Software

Installing Adobe Photoshop 6 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing your Adobe Photoshop 6.0 on Windows 7, Windows 8 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

How to install Adobe Photoshop 6

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

  1. Obtain your copy of the Longbow Reviver tool here – you need version 4.10 or newer
  2. Using Windows Explorer, copy your entire Adobe Photoshop 6 install CD media to your hard drive, to a folder path c:\InstallCDs\Adobe\Photoshop6
  3. Start the Longbow Reviver tool…
    1. select the 1st tab “Old Installer Reviver“
    2. using the ‘…’ button pick the  c:\InstallCDs\Adobe\Photoshop6 folder
    3. Now click the ‘Fix and Run Old Installer’ button
    4. Read and understand all the prompts that appear, then continue by clicking OK.
    5. You will need to wait up to 45 minutes before seeing the Adobe Photoshop 6.0 setup screen appear, be patient!
      1. If you have waited 90 minutes and nothing has appeared, reboot into Safe Mode and try this same process again.
  4. Once your Adobe Photoshop 6.0 setup screen appears, install as normal except:
    1. When you arrive at the install to ‘Destination Folder” – it is vitally important that you install to c:\adobe\photoshop6 (not C:\Program Files (x86)\Adobe\Photoshop 6.0 as normally prompted)
    2. Do not reboot if prompted to do so
  5. Now Photoshop is installed, go back to the the Longbow Reviver tool
    1. select the 2nd tab “Old Program Reviver“
    2. using the “…” button pick the newly installed c:\adobe\photoshop6 folder
    3. Set the “Run As” Option to “Windows 98“
    4. click ‘Fix Old Program’
      1. Say ‘Yes’ if the Reviver tool asks if you want to re-register…
  6. Now you can happily run your Adobe Photoshop 6 on Windows 7, Windows 8 or Windows 10 32bit or 64bit!

Installing the Photoshop 7 Upgrade

If you have a Adobe Photoshop 7 Upgrade CD, simply follow the same instructions as detailed here – Installing Adobe Photoshop 7 on Windows 10, Windows 7, Windows 8 and Windows 8.1

 

Troubleshooting

  • If your setup is not appearing within 1 hour, reboot into Safe Mode and try the same process as above again.
Copyright 2021 (c) Longbow Software

Installing AutoCAD Land Development Desktop R2i on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD Land Development Desktop R2i (LDDT R2i) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…
  1. Obtain your copy of the Longbow Converter here – you will need version 8.56 or newer
  2. Using Windows Explorer, copy your entire LDDT R2i 2000i installation CD to your hard drive, specifically to a folder path of c:\Autodesk\CD\ldtr2000i
  3. Start the Longbow Converter tool, select the 2nd tab “Old AutoCAD Installer Reviver”, pick the c:\Autodesk\CD\ldtr2000i folder, and click Run. Read and understand any/all the prompts the Converter pops up before pressing OK.
  4. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\ldt2000i (not C:\Program Files (x86)\Land Desktop R2\ as usually prompted)**
    1. Install as normal
    2. If you see the “AutoCAD Land Development Desktop 2i Migration assistant” dialog appear, say “No” – we did not test that installation path.
    3. Do not reboot if prompted to do so
  5. Make sure the setup is completely closed down, next, go back to the Converter tool, select the 3rd tab “Old AutoCAD Program Reviver”, pick the newly installed c:\ldt2000i folder and click “Fix“
  6. Now you can run your Land Desktop R2i on Windows 7, Windows 8, and Windows 10, but be sure to read the Troubleshooting guide below…

Installing Autodesk Civil Design 2i

Once you have installed AutoCAD Land Development Desktop R2i using the above instructions, you can now install Civil. Here’s how:

  1. Using Windows Explorer, copy your Autodesk Civil Design 2i installation CD to your hard drive, specifically to a folder path of c:\Autodesk\CD\CivilDesign2000i
  2. Start the Converter again, select the 2nd tab “Old AutoCAD Installer Reviver”, pick the c:\Autodesk\CD\CivilDesign2000i folder, and click “Run“.
    1. If the Converter asks you “What type of installer is this? – Is this a service pack , update or plug-in/app…?” – say “Yes”.
    2. Read and understand any/all the prompts the Converter pops up before pressing OK
  3. Install as normal.
    1. If you cannot find your menu items, you may need to MENULOAD c:\ldt2000i\Support\Civil.mnu

Installing Autodesk Survey 2i

Once you have installed AutoCAD Land Development Desktop R2i using the above instructions, you can now install Survey. Here’s how:

  1. Using Windows Explorer, copy your Autodesk Survey 2i installation CD to your hard drive, specifically to a folder path of c:\Autodesk\CD\Survey2000i
  2. Start the Converter again, select the 2nd tab “Old AutoCAD Installer Reviver”, pick the c:\Autodesk\CD\Survey2000i folder, and click “Run“.
    1. If the Converter asks you “What type of installer is this? – Is this a service pack , update or plug-in/app…?” – say “Yes”.
    2. Read and understand any/all the prompts the Converter pops up before pressing OK
  3. Install as normal.
    1. If you cannot find your menu items, you may need to MENULOAD c:\ldt2000i\Support\Survey.mnu

The LDT R2i Service Pack

  1. First download the Land Desktop 2i Civil Design 2i Service Pack 2 (stand-alone and network) from here and save to c:\Autodesk\sp
  2. Next, start the Converter, select the 3rd tab “Old AutoCAD Program Reviver” select the c:\Autodesk\sp folder, then click Fix.
    1. If asked if this is a service pack by the Converter tool, say yes.
  3. Now run the ld2i_sp2_ul.exe as normal from Windows Explorer.

Troubleshooting:

Copyright 2015 (c) Longbow Software

Install 32bit AutoCAD Architecture 2015 on Windows 7, Windows 8 and Windows 10

Posted on by

NOTE: This blog post specifically solves issues related to these error messages on installation…

  • “This operating system is not supported by AutoCAD® Architecture® 2015”
  • “You cannot install this product on the current operating system”
  • “You are attempting to use a 32-bit installer on a 64-bit operating system”
  • “This is a 32-bit AutoCAD® Architecture® 2015. It cannot be installed on 64-bit Windows”

Installing AutoCAD Architecture 2015 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. If you have CDs (if not check (3) below):
    1. Using Windows Explorer, copy Disk 1 of your AutoCAD Architecture 2015 CD to your hard drive, to a folder path c:\Autodesk\ADT2015
    2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\ADT2015 folder
  3. If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_Arch_2015_English_Win_32_64bit_en-us_Setup.exe
    1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\ADT2015), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD Architecture 2015 setup will automatically launch – simply close it and move to the next step.
  4. Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\ADT2015 folder, and click the Convert button.
  5. Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
    1. Once installed, we recommend you disable the AutoCAD Communication Center/InfoCenter toolbar as it uses a lot of memory, causes slow startup and most people don’t use it anyway!
  6. Now you can happily run your AutoCAD Architecture 2015 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10!

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2015 (c) Longbow Software

Installing Autodesk Land Development Desktop R2 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD Land Development Desktop R2 (LDDT R2 is AutoCAD 2000 based) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…
 
  1. Obtain your copy of the Longbow Converter here – you will need version 8.50 or newer
  2. Using Windows Explorer, copy your entire LDDT R2 2000 installation CD to your hard drive, specifically to a folder path of c:\Autodesk\lddt2000
  3. Start the Longbow Converter tool, select the 2nd tab, pick the c:\Autodesk\lddt2000 folder, and click Run. Read and understand all the prompts before pressing OK.
  4. For AutoCAD 2000 versions, the Migration Wizard almost instantly pops up, simply click Install 2000 as normal. Now, I know it’s unheard of these days, but at this point expect to wait at least 45 minutes for your Land Desktop R2 setup.exe program to fully appear. Once the setup starts, stop and read the next step…
  5. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\landdt2000 (not .\Autodesk Land Development Desktop as usually prompted)**
    1. Ignore the fact the the shortcut cannot be created, you will need to create this by hand once the installation is finished.
    2. Do not reboot if prompted to do so
  6. Once installed, using Windows Explorer, navigate to c:\Autodesk\lddt2000\data and run the MDAC_TYP.exe program, with these instructions
    1. When the “Microsoft Data Access Components 2.0” license agreement pops up, if you agree with the terms, click ‘Yes’
    2. At the next dialog, simply click “Continue”
    3. When the option dialog to do a Complete install or a Custom install, click “Custom”
    4. At the next dialog, un-check “Microsoft Remote Data Services” and then click “Continue”
    5. Exit the setup when finished.
  7. Next, go back to the Converter tool, select the 3rd tab, pick the newly installed c:\landdt2000 folder and click “Fix”
  8. Now you must run your AutoCAD Land Development Desktop R2 2000 as is as a first time initialization, it will start up in raw AutoCAD mode (using Windows Explorer, simply navigate to c:\landdt2000 and double click acad.exe)
    1. If you want to startup in LDT mode, simply create a shortcut to c:\landdt2000\acad.exe and set the Target property to c:\landdt2000\acad.exe /p lddt.arg
    2. If you want to startup in Map mode, simply create a shortcut to c:\landdt2000\acad.exe and set the Target property to c:\landdt2000\acad.exe /p map.arg
  9. Now you can run your Land Desktop R2 on Windows 7, Windows 8, and Windows 10, but be sure to read the Troubleshooting guide below…

The LDT 2000 Service Pack

  1. First download the stand-alone LandDesktop R2 2.01 sp from here and save to c:\Autodesk\sp
  2. Next, start the Converter, select the 3rd tab “Old AutoCAD Program Reviver” select the c:\Autodesk\sp folder, then click Fix.
    1. If asked if this is a service pack by the Converter tool, say yes.
  3. Now run the land201.exe as normal from Windows Explorer.

Troubleshooting:

  • If you are getting an “Out of memory error” when you start a new drawing, try creating a new project, and use a previous drawing to ‘Save As’ a template for use instead.

  • If your AutoCAD 2000 setup is not starting after 45 minutes, try rebooting, then restart the steps above. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try installing AutoCAD 2000 from Windows Safe Mode

 

Copyright 2014 (c) Longbow Software

Installing AutoCAD 2002 Express Tools on Windows 7, Windows 8 and Windows 10

Posted on by

If you are having trouble installing AutoCAD 2002 Express Tools with “This app cannot run on your PC” then read on…

Installing AutoCAD 2002 Express Tools (et1-9.exe) on Windows 7, Windows 8 and Windows 8.1 32bit or 64bit can be very easily defined in these short steps.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

  1. Obtain your copy of the Longbow Converter here
  2. Next, make sure you have AutoCAD 2002 already installed – follow these steps Installing AutoCAD 2002 on Windows 7, Windows 8 and Windows 10
  3. Unzip this zip file to c:\Autodesk
  4. Start the Longbow Converter tool, select the 2nd tab, pick the newly created c:\Autodesk\ExpressTools2002 folder, and click Run. Read and understand all the prompts before pressing OK.
  5. Now, I know it’s unheard of these days, but at this point expect to wait at least 45 minutes for your AutoCAD 2002 Express Tools setup.exe program to fully appear. Once the setup starts, stop and read the next step…
  6. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acad2002Et (not Program Files (x86)\AutoCAD Express Tools 2002 as usually prompted)**
    1. Do not reboot if prompted to do so
  7. Now you can happily run your Express Tools inside of AutoCAD 2002, simply start AutoCAD 2002 and to use Express Tools 2002 as normal..

Troubleshooting:

  • If your Express Tools 2002 setup is not starting after 45 minutes, try rebooting, then restart the steps above. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try the same steps as above in Windows Safe Mode
Copyright 2015 (c) Longbow Software

Installing Autodesk Land Desktop 2005 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD LDT 2005 on Windows 7, Windows 8, Windows 8.1 and Windows 10 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here
  2. Copy your LDT 2005 installation CD media to your hard drive, to a folder path c:\Autodesk\ldt2005 
    1. NOTE: If you have more LDT specific CD’s (not Survey or Civil as these are installed separately), simply copy the contents of each CD directly over the top of Disk 1, basically, overwrite all files in your previously copied c:\Autodesk\ldt2005 folder with the files from each of the CDs
  3. Next, start the Longbow Converter tool
    1. select the 2nd tab named “Old AutoCAD Installer Reviver“
    2. pick the c:\Autodesk\ldt2005 folder (where you copied your LDT CDs to on your hard drive)
    3. click the Run Old Installer button.
      1. Read and understand all the prompts before pressing OK.
      2. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, with these exceptions… (if you cannot move past the first screen in the setup, see Trouble Shooting below)…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\ldt2005 (not C:\Program Files (x86)\Autodesk Land Desktop 2005 that is defaulted)**.
    3. If asked to reboot after the install, say NO
  5. Once installed
    1. do not reboot
    2. make sure you fully close the AutoCAD setup program (because the Converter is waiting for the setup program to fully close) then
    3. go back to the Converter tool
    4. select the 3rd tab named “Old AutoCAD Program Reviver“
    5. pick the newly installed c:\ldt2005 folder
    6. click the Fix Old Program button.
  6. Now you can run your Autodesk LDT 2005 on Windows 7, Windows 8 and Windows 10, both 32bit and 64bit.
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues“, simply click “Don’t show this message again” and then click “Run the Program…“

Troubleshooting:

– If you are seeing this error when running either the “Import LandXML” or “Export LandXML” commands

LandXML Export - Run-time error '429' ActiveX component can't create object

LandXML Export – Run-time error ‘429’ ActiveX component can’t create object

then LDT 2005 Fixed VBA Modules into the same folder as your acad.exe (using the instructions above, it should be c:\ldt2005)

– If you are unable to activate your product, or the activation process crashes immediately on startup:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2023 (c) Longbow Software

Installing Inventor R11 (2007) on Windows 7, Windows 8 and Windows 8.1

Posted on by

***** NOTE: This solution is currently broken, we are actively trying to resolve it – more soon *****

Installing Inventor 2007 on Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here – you will need V8.11 or newer
  2. Copy your entire Inventor R11/Inventor 2007 CD to your hard drive, to a folder path c:\Autodesk\inventor2007 
  3. Start the Longbow Converter tool, select the 2nd tab, pick the c:\Autodesk\inventor2007 folder, and click “Run Old Installer”. Read and understand all the prompts before pressing OK. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you click the Install Autodesk Inventor 11 link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – if this happens, simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. I recommend that you do not install Vault or Autodesk Data Management Server – disable these options in the setup
    3. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\inventor2007\ (not Program Files (x86)\Autodesk\)**
    4. If there are any errors installing .NET Framework Runtime 1.1 sp1 – simply ignore and continue.
    5. You may see an error “error 26001. Cannot connect to Internet Information Server. (-2147221164) ” – I’m not sure what causes this problem, most likely Autodesk has shutdown the service, but you should simply click “Ignore” if you see this message.
    6. You may see an additional error popup “Error 29001. Vault management error: The request failed with HTTP status 404: Not Found.” – simply ignore by clicking “OK”
  5. Once installed, make sure you fully close the Autodesk Inventor 11 setup program (because the Converter is waiting for the setup program to fully close) then go back to the Converter tool, select the 3rd tab, pick the newly installed c:\inventor2007 folder and click “Fix Old Program”.
  6. Next, before running your Inventor 2007, install all the sp’s in chronological order (NOTE if you cannot install the sp’s, see the Troubleshooting section below)
    1. Autodesk Inventor 11 Service Pack 1
    2. Autodesk Inventor 11 Service Pack 2
    3. Autodesk Inventor 11 Service Pack 3
    4. Autodesk Inventor 11 Service Pack 4
  7. Now you can run your Autodesk Inventor 11 on Windows 7, Windows 8 and Windows 8.1, both 32bit and 64bit.
    1. NOTE: When starting Inventor 11, if you see a warning dialog when you run saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program…”

Troubleshooting:

– If you cannot install your Inventor 11 Service Packs because of an error “The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may be a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch” – rather than try and solve this issue, the easiest solution is:

  1. To go back to your old Windows XP machine and make sure that all of the sp’s are installed on your old Windows XP machine’s installation of inventor 11
  2. Next, simply copy all of the Inventor 11 program files and folders from your old Windows XP machine to a USB drive – copy the “contents” of C:\Program Files\Autodesk\Inventor
  3. Now transfer the USB to your new machine and copy the files that were on your old Windows XP machine’s C:\Program Files\Autodesk\Inventor folder into your newly installed c:\inventor2007 folder – you should see a question if you should overwrite all files, say YES

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of Inventor please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2015 (c) Longbow Software

Upgrading your existing AutoCAD to Windows 10 and Windows 11

Posted on by

So you have an old PC with a working copy of AutoCAD and you want to upgrade to Windows 10? STOP and read this whole blog first before you wipe your working PC…

Autodesk License Activation for older versions of AutoCAD

That’s right, Autodesk no longer support versions of AutoCAD (at the time of writing 2014 or earlier) which means that they will not give you a new authorization code. That means you will have to activate your AutoCAD license without Autodesk – you do have some options:

  1. First try activation via this offline process that Autodesk recently added
  2. If you have an activation code, try an Offline Activation 
  3. Transfer your existing AutoCAD license from your old PC to your new PC. Your AutoCAD install CD comes with utility to do the job, see below…

    NOTE: A good idea (before transfering the AutoCAD license from your old PC to the new PC) is to setup AutoCAD to run in offline mode then clone your old PC hard drive. This ensures you have a backup of your old PC with a valid license.

    NOTE: Apparently, the license transfer will fail if your license is invalid. Some examples we heard about failing are: it’s a USA license running in a different country or it’s an Education License or you used a serial number that was compromised

    1. AutoCAD 2009 or older – transfer license using the Autodesk Portable License Transfer Utility

      NOTE: AutoCAD 2006/2007       users – you MUST install this patch so you do not lose your activation through a bug in the software once it is transferred to the new PC
    2. AutoCAD 2010 or newer – transfer license using the License Transfer Utility
  4. If you have an Autodesk Network licensing setup, keep it. Apparently, if you have this you are completely safe from shutdown and you can move to new systems without problems.
  5. Call Autodesk an explain your situation, we heard some people managed to get an activation code because their existing one was lost through software fault.
  6. Go back to an older version of AutoCAD. AutoCAD R13, R14, 2000, 2000i, 2002, 2004 and some versions of 2005 don’t require online activation therefore, as long as you have the original activation codes, they can still be used.
    • They all run perfectly on Windows 10, but you will need to install them using our Converter App (click for install instructions R13 R14 2000 2000i 2002 2004 2005)
    • If you have DWG files saved by newer versions of AutoCAD then simply use the free Autodesk DWGTrueview App (which is a cut down version of AutoCAD) to convert your DWG file save versions back to an earlier version.
  7. For information purposes only: There is an AutoCAD Keygen application online called “X-Force” which you can use to generate your authcode. NOTE: using a keygen is highly illegal when using hacked serial numbers, we don’t recommend it. Some ask if it is still illegal to use a keygen with a paid/valid serial number? You need to do your own legal checks on that question before using a keygen. 

Is it possible to protect your working AutoCAD from losing its license?

Yes. The latest version of our Converter App (12.30 or newer) has a new “Block Internet Connection” feature which disables all internet access to and from your AutoCAD, this makes it impossible for your AutoCAD license to be deactivated at some point in the future (with the disadvantage that you lose any internet based features in AutoCAD)

Windows XP and Windows Vista AutoCAD users upgrading to Windows 10

For those of you who are still running AutoCAD on Windows XP and want to upgrade to Windows 10, you will need to

  1. Get a new Windows 10 PC, preferably one without (or disabled) Intel onBoard graphics.
  2. Once you have a Windows 10 PC, run Windows Update until there are no more updates left to be installed.
  3. Next, install your AutoCAD using the Converter app…
    1. click on the version of AutoCAD you have (it explains all that you need to do) : AutoCAD R14 AutoCAD 2000 AutoCAD 2000i AutoCAD 2002 AutoCAD 2004 AutoCAD 2005 AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 32bit AutoCAD 2009 32bit AutoCAD 2010 32bit AutoCAD 2011 32bit AutoCAD 2012 32bit AutoCAD 2013 32bit AutoCAD 2014 32bit 
    2. NOTE: If you can’t find your version listed, use the “Search” at the top left of this page
    3. Transfer the AutoCAD license as described above

Windows 7, Windows 8 and Windows 8.1 AutoCAD users upgrading to Windows 10

Here’s how to upgrade your PC to Windows 10 so that you can carry on using AutoCAD…

  1. Transfer your existing AutoCAD license from your old PC to your new PC. Your AutoCAD install CD comes with utility to do the job, see below… (A good idea is, before you transfer the AutoCAD license from your old PC to the new PC clone your old PC hard drive. This ensures you have a backup of your old PC with a valid license)
    1. AutoCAD 2009 or older – transfer license using the Autodesk Portable License Transfer Utility

      NOTE: AutoCAD 2006/2007 users – you MUST install this patch so you do not lose your activation through a bug in the software once it is transferred to the new PC
    2. AutoCAD 2010 or newer – transfer license using the License Transfer Utility
  2. Next, uninstall all AutoCAD versions on your system; it’s very important that you do this, if you don’t the Autodesk licensing system may get corrupted when you upgrade to Windows 10 at which point you will have to wipe the computer and start again.
  3. Now Upgrade to Windows 10
  4. Obtain the latest Longbow Converter supporting Windows 10 here
  5. Next, install your AutoCAD using the Converter app…
    1. click on the version of AutoCAD you have (it explains all that you need to do) : AutoCAD R14 AutoCAD 2000 AutoCAD 2000i AutoCAD 2002 AutoCAD 2004 AutoCAD 2005 AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 32bit AutoCAD 2009 32bit AutoCAD 2010 32bit AutoCAD 2011 32bit AutoCAD 2012 32bit AutoCAD 2013 32bit AutoCAD 2014 32bit 
    2. If you can’t find your version listed, use the “Search” at the top left of this page
    3. AutoCAD 2006/2007 users – you MUST install this patch so you do lose your license activation randomly 
  • What happens if you already upgraded to Windows 8.1 with your existing AutoCAD installation – most likely your AutoCAD will not run, nor will you be able to repair it. The best thing to get your AutoCAD running again is to carry out a Windows Reset.

Users of 32bit AutoCAD versions 2002 thru 2013 and running or Windows 7 upgrading to Windows 8.1

If you have a working Windows 7 machine and you are thinking to upgrade to Windows 8.1 best just stay where you are. Better to upgrade to Windows 10, aside from being a free upgrade, it seems to be a much better platform too.

With that said, if you must upgrade your working Windows 7 system to Windows 8.1, then it is of course possible using our Longbow Converter tool – you ***must*** first uninstall all AutoCAD products before doing the upgrade. Once Windows 8.1 has been installed, just use the Longbow Converter to re-install your 32bit AutoCAD software as before.

  • What happens if you already upgraded to Windows 8.1 with your existing AutoCAD installation – most likely your AutoCAD will not run, nor will you be able to repair it. The best thing to get your AutoCAD running again is to carry out a Windows Reset.

Users of 64bit AutoCAD versions 2002 thru 2013 and running or Windows 7 upgrading to Windows 8.1

If you have a working Windows 7 machine and you are thinking to upgrade to Windows 8.1 best just stay where you are. Better to upgrade to Windows 10, aside from being a free upgrade, it seems to be a much better platform too.

With that said, if you must upgrade your working Windows 7 system to Windows 8.1, then it is of course possible using our Longbow Converter tool – you ***must*** first uninstall all AutoCAD products before doing the upgrade. Once Windows 8.1 has been installed, install your 64bit AutoCAD products as normal then use the Longbow Converter to fix all 64bit AutoCAD 2008 thru 2013 Windows 8 issues

Copyright 2020 (c) Longbow Software

 

Installing AutoCAD R14 on Windows 7, Windows 8 and Windows 10

Posted on by

As an existing AutoCAD R14 user, you most likely cannot do without your beloved AutoCAD R14. With the latest hardware and required move to new Windows versions, trying to install your AutoCAD R14 gives an error like this one… 

Windows 16bit setup error - This app can't run on your PC

Windows 16bit setup error – This app can’t run on your PC, check software publisher

or

 “FATAL ERROR: HEAP ERROR”

or

MEM_BAD_POINTER

You can solve these problems easily using our Longbow Converter App – fix and manage your AutoCAD R14 on new versions of Windows 7, 8 and 10 64bit

How to install AutoCAD R14

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

  1. Obtain your copy of the Longbow Converter here
  2. NOTE: We recommend turning off Windows UAC before installing AutoCAD R14
  3. Start the Longbow Converter application…
    1. Place your AutoCAD R14 CD in the CDRom Drive
    2. Select the 2nd tab named “Old AutoCAD Installer Reviver“
    3. Using the “. . .” button, select your AutoCAD R14 installation CD
    4. Next, click the “Run Old Installer” button and follow the onscreen instructions
      1. Now, I know it’s unheard of these days, but at this point expect to wait up to 45 minutes for your AutoCAD R14 setup.exe program to appear, be patient…
    5. Once the setup starts, stop and read the next steps all the way to the end! By the way, if your AutoCAD R14 setup does not start after 45 minutes, read the Troubleshooting section below.
  4. In the AutoCAD R14 setup program…
    1. navigate through each setup dialog as normal, with these exceptions…
      1. Make sure you do a Typical Install (not a Full Install)
      2. When you get to the installation folder input dialog **it’s vitally important to make sure you install to c:\acadR14 (not .\AutoCAD R14 as usually prompted)**
  5. Now carry on with the install
    1. Do not reboot once the install is complete
    2. Ignore any errors related to not being able to create the shortcut e.g. “Cannot Create folder ‘AutoCAD R14’“, you will have to create a shortcut on your computer Desktop to your c:\acadR14\acad.exe by hand.
    3. Again, do not reboot if prompted to do so
  6. Once your AutoCAD R14 setup has completed the installation…
    1. Make sure you fully close the setup program.
    2. Once the setup is closed the Converter will automatically fix the c:\acadr14 program files. You should see “Success!” displayed in the 3rd tab named “Old AutoCAD Program Reviver“
    3. Reboot your PC
  7. Now you can happily run your AutoCAD R14 on Windows 7, Windows 8, or Windows 10 32bit or 64bit…
    1. Using Windows Explorer, navigate to c:\acadR14 and double click acad.exe

Troubleshooting

  1. If your AutoCAD R14 setup is not starting after 45 minutes…
    1. First try turning off UAC, rebooting, then restart the steps above.
    2. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try installing R14 from Windows Safe Mode
  2. If you are getting either a Bad Mem Pointer error and or a Smartheap handler recursively re-entered error when you start your AutoCAD R14 then you need to re-run all the steps above, taking care to do each step precisely as it says, most likely you are missing from step 5 or you have not installed to c:\acadR14 as stated in step (7) above.
  3. When starting AutoCAD, if you receive an ‘acad.exe – System Error’ message: The program can’t start because ac1st15.dll is missing from your computer. Try reinstalling the program to fix this problem. If you carried out step (7) above, then try rebooting your PC
  4. If you are getting a WinHelp() error when pressing F1 to try and access the Help system then simply install the WinHelp (WinHlp32.exe) module from Microsoft
  5. Issues with Calcomp Digitizer – Calcomp Digitizer not working
  6. If the setup displays an error message

    InstallError (IUO)               
    (X)  not enough space(IUO)

    try unplugging any External USB drives

  7. Plotting issues? If you get an error splwow64.exe “The application was unable to start correctly” with error “0xc0000005”
    1. Make sure your Anti-virus and/or Windows Firewall is not blocking splwow64.exe
    2. If the problem persists
      1. First, note that you need the latest version of the Converter App
      2. Start the Converter App
      3. Select the 3d tab “Old AutoCAD Program Reviver” 
      4. Click the Tools Menu->Reduced Power Mode
      5. Using the “…” button, pick your acad.exe folder e.g. c:\acadr14
      6. Click “Fix Old Program” and follow prompts
  8. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
Copyright 2019 (c) Longbow Software

 

Installing AutoCAD Architecture 2007 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD Architectural Desktop 2007 (ADT 2007) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here
  2. Copy your AutoCAD Architectural Desktop 2007 CD to your hard drive, to a folder path c:\Autodesk\adt2007
    1. If you have more CD’s, copy them all directly over the top of Disk 1, basically, overwrite all files in your previously copied c:\Autodesk\adt2007 folder
  3. Start the Longbow Converter tool, select the 2nd tab, pick the c:\Autodesk\adt2007 folder, and click Run. Read and understand all the prompts before pressing OK. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\adt2007 (not Program Files (x86)\AutoCAD Architectural Desktop 2007)**.
  1. Once installed, make sure you fully close the AutoCAD Architectural Desktop setup program (because the Converter is waiting for the setup program to close) then go back to the Converter tool, select the 3rd tab, pick the newly installed c:\adt2007 folder and click Fix.
  2. Next, run your AutoCAD Architectural Desktop 2007
    1. NOTE: If you see a warning dialog when you run saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program without getting help”
  3. You can now happily run your AutoCAD Architectural Desktop 2007 on Windows 7, Windows 8, Windows 8.1 and Windows 10!

Installing AutoCAD Architectural Desktop 2007 Service Pack 1

  1. English Users, Download your English AutoCAD 2007 sp1 from here
  2. Now copy your newly downloaded sp (for English users the filename is adt2007swlsp1enu.exe) to folder path c:\Autodesk\sp
  3. Start the Converter, select the 3rd tab, pick the c:\Autodesk\sp folder and click Fix.
  4. Now run the adt2007swlsp1enu.exe from Windows explorer to install as normal.

Troubleshooting:

– If your ADT menuing system does not appear correctly for some reason, start AutoCAD, type CUILOAD at the command line, pick Browse and navigate to %APPDATA%\Autodesk\ADT 2007\enu\Support, pick the adt.cui file, then click Load

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

 Copyright 2015 (c) Longbow Software

Installing AutoCAD Architecture 2005 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD Architectural Desktop 2005 (ADT 2005) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here
  2. Copy your AutoCAD Architectural Desktop 2005 installation CD to your hard drive, to a folder path c:\Autodesk\adt2005
    1. If you have more than one CD, simply copy them all directly over the top of the first CD, basically, overwrite all CD1 files in your previously copied c:\Autodesk\adt2005 folder with CD2
  3. Start the Longbow Converter tool
    1. Select the 2nd tab named “Old AutoCAD installer Reviver“
    2. Pick the c:\Autodesk\adt2005 folder
    3. Click the “Run Old Installer” button.
      1. Read and understand all the prompts before pressing OK. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\adt2005 (not Program Files (x86)\AutoCAD Architectural Desktop 2005 as prompted by default)**.
  1. Once installed, make sure you fully close the AutoCAD Architectural Desktop setup program (because the Converter is waiting for the setup program to close) then
    1. Go back to the Converter tool
    2. Select the 3rd tab named “Old AutoCAD Program Reviver”
    3. Pick the newly installed c:\adt2005 folder and click the “Fix” button at the bottom.
  2. Next, run your AutoCAD Architectural Desktop 2005
    1. NOTE: If you see a warning dialog when you run saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program without getting help”
  3. You can now run your AutoCAD Architectural Desktop 2005 on Windows 7, Windows 8, Windows 8.1 and Windows 10 but first we recommend you install the following Service Packs…

Installing AutoCAD Architectural Desktop 2005 Service Pack 1

  1. English Users obtain AutoCAD Architecture ADT 2005 sp1 from here
  2. Now copy your newly downloaded sp (for English users the filename is adt2005swlsp1enu.exe) to folder path c:\Autodesk\sp
  3. Start the Converter, select the 3rd tab, pick the c:\Autodesk\sp folder and click Fix.
  4. Now run the adt2005swlsp1enu.exe from Windows explorer to install as normal.

Troubleshooting:

– If your ADT menuing system does not appear correctly for some reason, start AutoCAD, type CUILOAD at the command line, pick Browse and navigate to %APPDATA%\Autodesk\ADT 2005\enu\Support, pick the adt.cui file, then click Load

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

 Copyright 2016 (c) Longbow Software

Installing Autodesk Land Desktop 2007 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD LDT 2007 on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here
  2. Start In the Converter tool
    1. Next, click the File menu’s “Backup CD to Disk”
    2. Follow the prompts
  3. Once the backup is completed
    1. click the Run Old Installer button… Read and understand all the prompts before pressing OK.
    2. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, with these exceptions… (if you cannot move past the first screen in the setup, see Trouble Shooting below)…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\ldt2007 (not C:\Program Files (x86)\Autodesk Land Desktop 2007 that is defaulted)**.
    3. If asked to reboot after the install, say NO
  5. Once installed, do not reboot, make sure you fully close the AutoCAD setup program (because the Converter is waiting for the setup program to fully close) then go back to the Converter tool, select the 3rd tab, pick the newly installed c:\ldt2007 folder and click the Fix Old Program button.
  6. Now you can run your Autodesk LDT 2007 on Windows 7, Windows 8 and Windows 10, both 32bit and 64bit.
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues“, simply click “Don’t show this message again” and then click “Run the Program…“

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes immediately on startup:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

– If you cannot navigate to the next page in the Setup (because clicking on the install links does nothing)…

  1. Having completed steps 1 through 3 above, Start Windows Explorer and navigate to c:\Autodesk\ldt2007\bin\installer then run Setup.exe
  2. Once setup.exe starts, resume the instructions above starting at step 4 above

Copyright 2017 (c) Longbow Software

Installing AutoCAD Mechanical 2007 on Windows 7, Windows 8 and Windows 10

Posted on by

Installing AutoCAD Mechanical 2007 (ACM 2007) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here
  2. Copy your AutoCAD Mechanical 2007 installation CD media to your hard drive, to a folder path c:\Autodesk\mdt2007 
    1. NOTE: If you have more CD’s, simply copy the contents of each CD directly over the top of Disk 1, basically, overwrite all files in your previously copied c:\Autodesk\mdt2007 folder with the files from each of the CDs
  3. Next, start the Longbow Converter tool, select the 2nd tab, pick the c:\Autodesk\mdt2007 folder, and click Run. Read and understand all the prompts before pressing OK. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, with these exceptions… (if you cannot move past the first screen in the setup, see TroubleShooting below)…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\mdt2007 (not Program Files (x86)\Autodesk which is show by default)**.
  5. Once installed, make sure you fully close the AutoCAD setup program (because the Converter is waiting for the setup program to fully close) then go back to the Converter tool, select the 3rd tab, pick the newly installed c:\mdt2007 folder and click Fix.
  6. Now you can run your AutoCAD Mechanical 2007 on Windows 7, Windows 8 and Windows 10, both 32bit and 64bit.
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program…”

Installing AutoCAD Mechanical 2007 Service Packs

AutoCAD Mechanical 2007 has 2 service packs, don’t install the sp1, instead all you need to do is install sp2… Here’s how:

  1. Download AutoCAD Mechanical 2007 sp2
  2. Unzip the acm2007_swl_sp2.zip into c:\Autodesk\sp2
  3. Start the Converter, select the 3rd tab, pick the c:\Autodesk\sp2 folder then click ‘Fix’
  4. Once fixed, simply run the c:\Autodesk\sp2\acm2007_swl_sp2.exe to install as normal

Troubleshooting:

– If you cannot navigate to the next page in the Setup (because clicking on the install links does nothing)…

  1. Having completed steps 1 through 3 above, Start Windows Explorer and navigate to c:\Autodesk\mdt2007\bin\acadfeui\acadm then run Setup.exe
  2. Once setup.exe starts, resume the instructions above starting at step 4

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2015 (c) Longbow Software

Installing AutoCAD Architecture 2006 on Windows 7, Windows 8 and Windows 10

Posted on by

Follow these instructions to solve issues around installing/running your old AutoCAD 2006 on newer versions of 64bit Windows 7, Windows 8 and Windows 10

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

How to install AutoCAD ADT 2006 

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Longbow Converter tool
    1. Insert your AutoCAD CD into your CDRom drive
    2. select the 2nd tab named “Old AutoCAD Installer Reviver“
    3. Using the “…” button, path the to your AutoCAD CD
    4. Click “Run Old Installer”
      1. Read and follow all the prompts
      2. Once the AutoCAD setup starts, stop and read the next step…
  3. In the setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues”
      1. simply check the “Don’t show this message again”
      2. then click the “Run the program without getting help” button
    2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\adt2006 (not Program Files (x86)\AutoCAD Architecture 2006)**.
  4. Once installed
    1. Do not reboot if asked to do so
    2. Make sure to fully close the setup program when the installation is complete.
    3. Back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  5. Finally, reboot your PC and run your AutoCAD as normal
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues”
      1. Click “Don’t show this message again”
      2. then click “Run the Program…”

Install AutoCAD ADT 2006 Service Pack 1

  1. English Users, Download your English AutoCAD 2006 sp1 from here
    1. Non-English users, Download your language specific AutoCAD 2006 sp1 from here
  2. Now copy your newly downloaded sp (for English users the filename is adt2006swlsp1enu.exe) to folder path c:\Autodesk\sp
  3. Start the Converter, select the 3rd tab, pick the c:\Autodesk\sp folder and click Fix.
  4. Now run the adt2006swlsp1enu.exe from Windows explorer to install as normal.

Troubleshooting

– If your ADT menuing system does not appear correctly for some reason, start AutoCAD, type CUILOAD at the command line, pick Browse and navigate to %APPDATA%\Autodesk\ADT 2006\enu\Support, pick the adt.cui file, then click Load

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2019 (c) Longbow Software

Installing Robolab Lego RCX Mindstorms on Windows 10, Windows 7, Windows 8 and Windows 8.1

Posted on by

This blog post is specifically for installing Robolab Lego RCX on Windows 7, Windows 8 and Windows 8.1…

Installing Lego RCX Windows 10, Windows 7, Windows 8 or Windows 8.1 can be very easily defined in these short steps.

  1. Obtain your copy of the Longbow Reviver here
  2. Using Windows Explorer, copy your Lego RCX  CD to c:\RobolabCD
  3. Rename the PC-Install.exe to setup.exe
  4. Now, start the Longbow Reviver tool, on the “Old Installer Reviver” tab click the “Disable Windows 64bit Device Driver Signing Verification” checkbox, so that it is set.
  5. Now reboot.
  6. When your computer has started up again, start the Longbow Reviver tool again, select the “Old Installer Reviver” tab, pick the c:\RobolabCD folder then click the Fix and Run Old Installer button.
  7. Once the conversion process is complete, the Robolab installer dialog will appear. Simply install as normal to the normal c:\Robolab folder.
  8. Once the installation process is complete, make sure you fully quit the Robolab installer then switch back to the Longbow Reviver tool, select the “Old Program Reviver” tab, pick the newly installed c:\Robolab folder, then click Fix Old Program
  9. Your Robolab Lego RCX is now ready for use.
Copyright 2015 (c) Longbow Software

Installing 64bit AutoCAD LT 2009 on Windows 8 and Windows 10 64bit

Posted on by

Your 64bit AutoCAD LT 2009 was not designed to run in Windows 10 (this version of Windows is newer than AutoCAD LT 2009). In order for your AutoCAD LT 2009 to run as it did in previous versions of Windows, you need to follow these easy steps…

Install 64bit AutoCAD LT 2009

  1. Make sure all previous installed versions of AutoCAD LT 2009 are uninstalled first.
  2. Obtain your copy of the Longbow Converter here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using your mouse, right click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter“
    3. Next, using the “…” button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once you have completed the AutoCAD installation process…
    1. close the setup program then start the Converter software
    2. Select the 3rd tab “Old AutoCAD Program Reviver”
      1. Using the “…” button, pick the newly installed C:\Program Files\Autodesk\AutoCAD LT 2009 folder
      2. then click “Fix Old Program“
  5. Next install the AutoCAD LT 2009 Update 3 from here 
  6. Now you can happily run your AutoCAD LT 2009 64bit on Windows 10

Troubleshooting

– If your AutoCAD crashes while interacting with the Ribbon click here

– If your AutoCAD is running really slowly, try disabling your integrated graphics card so you can run your high-performance card instead

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2020 (c) Longbow Software

Installing AutoCAD Mechanical Desktop 2007 from an Inventor 11 CD on Windows 7, Windows 8 and Windows 10.

Posted on by

If you have an Autodesk Inventor 11 CD, you may simply need to install AutoCAD MDT 2007 from that CD…

Installing AutoCAD Mechanical 2007 from your Inventor 11 CD on Windows 10, Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

  1. Obtain your copy of the Longbow Converter here (you need V7.29 or newer)
  2. Next, copy your Autodesk Inventor 11 CD to your hard drive, to folder path  c:\Autodesk\Inventor2007
  3. Start the Longbow Converter tool
    1. Select the 2nd tab titled “Old AutoCAD Installer Reviver“
    2. Using the ‘…’ button, pick the folder where you just copied your Inventor 11 CD to c:\Autodesk\Inventor2007
      1. The Converter should say “Inventor 2007 Setup found, …”
    3. Next, click the ‘Run Old Installer‘ button.
      1. Read and understand all the prompts before pressing OK. Once the setup starts, stop and read the next step…
  4. In the setup program.
    1. navigate through each setup dialog as normal, except when you get to the Products Install dialog – Uncheck *all* products except “Autodesk Mechanical Desktop 2007“
    2. Install as normal
    3. If asked to Reboot, do not reboot
  5. Once installed, make sure you fully close the setup application (because the Converter is waiting for the setup program to fully close)
    1. Go back to the Converter tool and select the 3rd tab titled “Old AutoCAD Program Reviver“
    2. Using the ‘…’ button, pick the newly installed c:\Program Files (x86)\Autodesk\MDT 2007 folder
    3. Next, click the ‘Fix Old Program‘ button.
  6. Now you can run your Autodesk Mechanical Desktop 2007 on Windows 10, Windows 7 and Windows 8, both 32bit and 64bit.
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program…”

Troubleshooting

– If you are unable to activate your product, or the activation process crashes:

Installing AutoCAD LT 2004 on Window 7, Windows 8 and Windows 10

Posted on by

NOTE: We currently only support US unlocked versions of 2004 on 64bit OS. European or locked US support 2004 is limited only to 32bit Windows 7, 8 and Windows 10.

Installing AutoCAD LT 2004 on Windows 7, Windows 8, Windows 8.1 and Windows 10 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

  1. Obtain your copy of the Longbow Converter here
  2. Copy your AutoCAD LT 2004 CD to your hard drive, to a folder path c:\Autodesk\acadlt2004 
  3. Start the Longbow Converter tool
    1. Select the 2nd tab ‘Old AutoCAD Installer Reviver‘
    2. Pick the c:\Autodesk\acadlt2004 folder
    3. click the ‘Run’ button.
      1. Read and understand all the prompts before pressing OK. Once the setup starts, stop and read the next step…
  4. In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acadlt2004 (not Program Files (x86)\AutoCAD LT 2004**
    1. If you see an error in install “.NET Runtime Optimization Service has stopped working” – simply ignore by clicking the “Close Program” button
    2. Do not reboot if asked to do so
  5. Once installed
    1. go back to the Converter tool, select the 3rd tab ‘Old AutoCAD Program Reviver‘,
    2. pick the newly installed c:\acadlt2004 folder
    3. click the ‘Fix Old Program‘ button.
  6. Now you can run happily your AutoCAD LT 2004 in Windows 7, Windows 8 or Windows 10 both 32bit and 64bit.
    1. NOTE: If you see a warning dialog when you run saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program…”
Installing AutoCAD LT 2004 Sp1a
To install the sp for your AutoCAD…
  1. Download your AutoCAD LT 2004 Sp1a
  2. Copy the service pack exe installer to folder path c:\Autodesk\sp
  3. Start the Converter, select the 3rd tab, pick the c:\Autodesk\sp folder and click Fix.
  4. Now you can run the service pack exe installer from Windows explorer as normal
Troubleshooting:
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
Copyright 2016(c) Longbow Software

Installing AutoCAD ADT 2004 on Windows 7, Windows 8 and Windows 10

Posted on by

Follow these instructions to solve issues around installing/running your old AutoCAD 2004 on newer versions of 64bit Windows 7, Windows 8 and Windows 10

How to install AutoCAD Architecture 2004 

  1. Obtain your purchased copy of the Longbow Converter here
  2. Start the Longbow Converter tool
    1. Insert your AutoCAD CD into your CDRom drive
    2. Select the 2nd tab named “Old AutoCAD Installer Reviver“
    3. Using the “…” button, path the to your AutoCAD CD
    4. Click “Run Old Installer”
      1. Read and follow all the prompts
      2. Once the AutoCAD setup starts, stop and read the next step…
  3. In the AutoCAD setup program, navigate through each setup dialog as normal, with these exceptions…
    1. When you arrive at the installation folder path setup dialog…
      1. **it’s vitally important to make sure you install to c:\acad2004 (not Program Files (x86)\AutoCAD 2004)**.
    2. While installing…
      1. If you see an error in install “.NET Runtime Optimization Service has stopped working” – simply ignore by clicking the “Close Program” button
      2. Do not reboot if asked to do so
    3. Once installed
      1. Do not reboot if asked to do so
      2. Make sure to fully close the setup program when the installation is complete.
      3. Back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
  4. Finally, reboot your PC and run your AutoCAD as normal
    1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues”
      1. Click “Don’t show this message again”
      2. then click “Run the Program…”

Troubleshooting

  1. If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2020 (c) Longbow Software

Installing 64bit AutoCAD 2012 on Windows 8 and Windows 10

Posted on by

AutoCAD 2012 was not designed to run in Windows 10 (Windows 10 was released after AutoCAD 2012) and inevitably you will run into issues such as the infamous Ribbon crashing issue, slow startup problems, text scaling issues, etc.

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2012 installation so that you can be up and running again… Just follow these easy instructions:

How to install 64bit AutoCAD 2012

  1. First, uninstall any existing AutoCAD 2012 installations on your computer
  2. Next obtain a copy of the Longbow Converter App, download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using your mouse, right-click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter“
    3. Next, using the “. . .“  button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the AutoCAD installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!“
  5. Now you can run your AutoCAD as normal

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2018 (c) Longbow Software

Installing 64bit AutoCAD 2011 on Windows 10

Posted on by

AutoCAD 2011 was not designed to run in Windows 10 (Windows 10 was released after AutoCAD 2011) and inevitably you will run into issues such as the infamous Ribbon crashing issue, slow startup problems, text scaling issues, etc.

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD 2011 installation so that you can be up and running again… Just follow these easy instructions:

How to install 64bit AutoCAD 2011

  1. First, uninstall any existing AutoCAD 2011 installations on your computer
  2. Next, obtain the Longbow Converter App (V11.15 or higher), download here
  3. Start the Converter tool
    1. Pick the 1st tab named “AutoCAD 32bit Installer Converter“
    2. Using your mouse, right-click the tab text “AutoCAD 32bit Installer Converter” so that it changes to “AutoCAD 64bit Installer Converter“
    3. Next, using the “. . .“  button, select your AutoCAD installation CD and follow the instructions presented by the Converter tool user interface.
  4. Once the conversion process is complete
    1. click Install/Run Setup to start setup
    2. Once you have completed the AutoCAD installation process…
      1. Completely close the setup program
      2. Go back to the Converter App and make sure it states “Success!“
  5. Now you can run your AutoCAD as normal

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Copyright 2018 (c) Longbow Software