Are you a software developer who wants the best way to reduce anxiety after a stressful day at work? Consider CBD gummies for anxiety. Observer has a list of the best CBD gummies for those interested.

Installing 32bit AutoCAD Civil 3D 2009 on 64bit Windows 7, Windows 8 and Windows 10

Posted on August 19, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD® Civil 3D® 2009”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Civil 3D® 2009. It cannot be installed on 64-bit Windows”

Installing AutoCAD Civil 3D 2009 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Civil 3D CD to your hard drive, to a folder path c:\Autodesk\Civil3d2009
2. Next, copy Disk 2 of your Civil 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Civil3d2009 folder
3. Same again for Disk 3
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Civil3d2009), now click OK. Wait until all of the files have extracted, when they do, the Civil 3D 2009 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool
1. Select the 1st tab titled “AutoCAD 32bit Installer Converter“
2. Using the ‘…’ button, select the c:\Autodesk\Civil3d2009 folder and click OK
3. Once you have c:\Autodesk\Civil3d2009 selected , click the “Convert…” button to convert the media.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Civil3d 2009 folder, then click “Fix Old Program…“.
Now you can happily run your Civil 3D 2009 32bit on Windows 10, Windows 7 and Windows 8 64bit.

Installing the Civil 3d 2009 sp3

We recommend that you download and install the latest sp3 from Autodesk which can be found here – AutoCAD Civil 3d 2009 sp3

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD Architecture 2016 on Windows 7, Windows 8 and Windows 10

Posted on August 19, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of 32bit AutoCAD Architecture 2016 on 64bit Windows…

“This operating system is not supported by AutoCAD® Architecture®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Architecture® 2016. It cannot be installed on 64-bit Windows”

Installing 32bit AutoCAD Architecture 2016 on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Architecture 2016 install media to your hard drive, to a folder path c:\Autodesk\ADT2016
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\ADT2016 folder
If you have a single self extracting exe downloaded from Autodesk called something like Architecture_2016_English_Win_32_64bit_en-us_Setup.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\ADT2016), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD Architecture 2016 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\ADT2016 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
1. Once installed, we recommend you disable the AutoCAD Communication Center/InfoCenter toolbar as it uses a lot of memory, causes slow startup and most people don’t use it anyway!
Now you can happily run your AutoCAD Architecture 2016 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10!

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

Try uninstalling the July 2014 Microsoft security update

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing AutoCAD Architecture 2010 32bit on Windows 7, Windows 8 and Windows 10

Posted on August 17, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD ADT 2010…

“This operating system is not supported by AutoCAD® Architecture”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Architecture® 2010. It cannot be installed on 64-bit Windows”

Installing AutoCAD Architecture 2010 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

IMPORTANT NOTE: Autodesk no longer supply License Activation codes for this version of AutoCAD. The best way is to transfer your existing license to the new PC but there are other options, we document them here

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Start the Converter App and note the user interface
2. Select the 1st tab named “AutoCAD 32bit Installer Converter“
  1. Using the “. . .” button, select your AutoCAD installation CD
  2. Next, click the “Convert“ button and follow instructions
  3. Now go to step 4
If you have a single self extracting exe downloaded from Autodesk…
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\adt2010), now click OK. Wait until all of the files have extracted, when they do, note that the ADT 2010 setup will automatically launch – make sure you close the setup and move to the next step
2. Start the Converter App and note the user interface
3. Using the “. . .” button, select the path c:\Autodesk\adt2010
4. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup.
2. Next, just install as normal.
Once the installation process is complete…
1. be sure to fully close the AutoCAD setup.
2. Wait for the Converter to finish and print “Success”
Now you can happily run your AutoCAD Architecture 2010 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10 64bit!

Troubleshooting:

If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
If your AutoCAD crashes while interacting with the Ribbon click here
If you are unable to activate your product, or the activation process crashes:
1. Try uninstalling the July 2014 Microsoft security update
2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
If your Windows hangs on startup after installing please refer to this help blog

Installing Map 3D 2015 32bit on Windows 7, Windows 8 and Windows 10

Posted on August 14, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map3D 2015…

“This operating system is not supported by AutoCAD® Map 3D®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Map 3D® 2015. It cannot be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2015 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2015
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2015 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Map3d2015), now click OK. Wait until all of the files have extracted, when they do, note that the Map 3D 2015 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2015 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Map 3d 2015 folder, then click ‘Fix Old Program‘.
Now you can happily run your Map 3D 2015 32bit on Windows 7, Windows 8 and Windows 10 64bit!

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD LT 2013 on Windows 7, Windows 8 and Windows 10

Posted on August 14, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation…

“This operating system is not supported by AutoCAD LT®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD LT® 2013. It cannot be installed on 64-bit Windows”
“FATAL ERROR: (0x7ff87b2f0005) c:\program files\autodesk\autocad lt 2013\acsceneoe.dbx“

Installing AutoCAD LT 2013 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Make sure all previous installed versions of AutoCAD 2013 are uninstalled first.
Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD LT 2013 CD to your hard drive, to a folder path c:\Autodesk\AutoCADLT2013
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADLT2013 folder
If you have a single self extracting exe downloaded from Autodesk called something like AutoCAD_LT_2013_English_Win_32bit.exe
1. Simply run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\AutoCADLT2013), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD LT 2013 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab named ‘AutoCAD 32bit Installer Converter‘
1. pick the c:\Autodesk\AutoCADLT2013 folder
2. click the ‘Convert‘ button.
Once the conversion process is complete
1. Click ‘Install/Run Setup‘ to start setup
2. Install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete…
1. go back to the Converter, select the 3rd tab named ‘Old AutoCAD Program Reviver‘
2. Pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD LT 2013 folder
3. Click ‘Fix Old Program‘.
Now you can happily run your AutoCAD LT 2013 32bit on Windows 7, Windows 8 and Windows 10!

Installing AutoCAD LT 2013 Service Packs

There are 2 sp’s for AutoCAD LT 2013, these are the the 32bit versions of the sp’s

Here’s sp1 – AutoCAD LT 2013 sp1 – install as normal
Here’s sp2 – AutoCAD LT 2013 sp2 – install as normal

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing 32bit AutoCAD LT 2012 on Windows 7, Windows 8 and Windows 10

Posted on August 14, 2015 by simonbooth

These instructions solve issues around installing/running your old AutoCAD LT 2012 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these

“This operating system is not supported by AutoCAD® LT 2012”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® LT 2012. It cannot be installed on 64-bit Windows”

You can automatically solve these problems using our Longbow Converter App, it fixes and manages the AutoCAD LT 2012 installation so that you can be up and running again… Just follow these instructions:

How to install AutoCAD LT 2012

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal

Installing AutoCAD LT 2012 Service Packs

We recommend that you download and install the latest Service Packs from Autodesk which can be found here

AutoCAD LT 2012 sp1 – install as normal
AutoCAD LT 2012 sp2 – install as normal

Troubleshooting

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing Mathcad 2000 Pro on Windows 7, Windows 8 and Windows 10

Posted on July 27, 2015 by simonbooth

If you are having trouble installing Parametric Technology Corporation’s Mathcad 2000 Pro with errors like this…

Windows 16bit setup error – “This app can’t run on your PC“

then read on…

How to install Mathcad 2000

Purchase a copy of the Longbow Reviver tool here
Using Windows Explorer
1. Copy your Mathcad 2000 CD to your hard drive, to a folder path c:\InstallCDs\Mathcad2000
Start the Longbow Reviver tool
1. select the 1st tab named “Old Installer Reviver”
2. using the ‘…’ button, select folder c:\InstallCDs\Mathcad2000\Mathcad. At this point, the Reviver tool should display a message telling you that setup.exe was found, if so…
3. Click the “Fix and Run Old Installer” button
4. Read and understand all the prompts that appear, then continue by clicking OK.
Now, I know it’s unheard of these days, but at this point expect to wait up to 45 minutes for your full Mathcad 2000 setup.exe program to appear….
1. 1. Be patient, grab lunch maybe… 🙂
  2. Once the Mathcad 2000 Professional setup application finally displays all in Blue stop and read the next step…
In the setup program click through setup as normal, except when you get to the path for the installation – make sure you update the entry from c:\…\Mathcad 2000 Professional to c:\Mathcad2000
Now carry on with the install
1. Do not reboot if prompted to do so
2. Note, we did not Register when testing this install
Once Mathcad 2000 Professional is installed
1. Be sure to fully quit the setup
2. go back to the Reviver tool
  1. select the 2nd tab named “Old Program Reviver”
  2. Using the ‘…’ button, pick the newly installed c:\Mathcad2000 folder
  3. click “Fix Old Program”
  4. Say “Yes” if the Reviver tool asks if you want to re-register…
Now you can happily run your Mathcad 2000 Professional on Windows 7, Windows 8 or Windows 10

MathCAD 2000 Pro Update

There is an update for MathCAD Pro 2000, here’s how to install it

Download the MathCAD 2000 Pro Update from here
Unzip to folder c:\InstallCDs\MathCAD2000sp
Start the Longbow Reviver tool
1. select the 1st tab named “Old Installer Reviver”
2. using the ‘…’ button, select folder c:\InstallCDs\MathCAD2000sp. At this point, the Reviver tool should display a message telling you that setup.exe was found, if so…
3. Click the “Fix and Run Old Installer” button
4. Read and understand all the prompts that appear, then continue by clicking OK.
Wait up to 45 minutes for your full Mathcad 2000 setup.exe program to appear, then install as normal

Troubleshooting

If setup never appears, Boot your computer into Safe Mode using these instructions and try the steps above again,
If you are getting a WinHelp() error when pressing F1 to try and access the Help system then simply install the WinHelp (WinHlp32.exe) module from Microsoft

Installing Autodesk Land Development Desktop R2 on Windows 7, Windows 8 and Windows 10

Posted on July 24, 2015 by simonbooth

Installing AutoCAD Land Development Desktop R2 (LDDT R2 is AutoCAD 2000 based) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

Obtain your copy of the Longbow Converter here – you will need version 8.50 or newer
Using Windows Explorer, copy your entire LDDT R2 2000 installation CD to your hard drive, specifically to a folder path of c:\Autodesk\lddt2000
Start the Longbow Converter tool, select the 2nd tab, pick the c:\Autodesk\lddt2000 folder, and click Run. Read and understand all the prompts before pressing OK.
For AutoCAD 2000 versions, the Migration Wizard almost instantly pops up, simply click Install 2000 as normal. Now, I know it’s unheard of these days, but at this point expect to wait at least 45 minutes for your Land Desktop R2 setup.exe program to fully appear. Once the setup starts, stop and read the next step…
In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\landdt2000 (not .\Autodesk Land Development Desktop as usually prompted)**
1. Ignore the fact the the shortcut cannot be created, you will need to create this by hand once the installation is finished.
2. Do not reboot if prompted to do so
Once installed, using Windows Explorer, navigate to c:\Autodesk\lddt2000\data and run the MDAC_TYP.exe program, with these instructions
1. When the “Microsoft Data Access Components 2.0” license agreement pops up, if you agree with the terms, click ‘Yes’
2. At the next dialog, simply click “Continue”
3. When the option dialog to do a Complete install or a Custom install, click “Custom”
4. At the next dialog, un-check “Microsoft Remote Data Services” and then click “Continue”
5. Exit the setup when finished.
Next, go back to the Converter tool, select the 3rd tab, pick the newly installed c:\landdt2000 folder and click “Fix”
Now you must run your AutoCAD Land Development Desktop R2 2000 as is as a first time initialization, it will start up in raw AutoCAD mode (using Windows Explorer, simply navigate to c:\landdt2000 and double click acad.exe)
1. If you want to startup in LDT mode, simply create a shortcut to c:\landdt2000\acad.exe and set the Target property to c:\landdt2000\acad.exe /p lddt.arg
2. If you want to startup in Map mode, simply create a shortcut to c:\landdt2000\acad.exe and set the Target property to c:\landdt2000\acad.exe /p map.arg
Now you can run your Land Desktop R2 on Windows 7, Windows 8, and Windows 10, but be sure to read the Troubleshooting guide below…

The LDT 2000 Service Pack

First download the stand-alone LandDesktop R2 2.01 sp from here and save to c:\Autodesk\sp
Next, start the Converter, select the 3rd tab “Old AutoCAD Program Reviver” select the c:\Autodesk\sp folder, then click Fix.
1. If asked if this is a service pack by the Converter tool, say yes.
Now run the land201.exe as normal from Windows Explorer.

Troubleshooting:

If you are getting an “Out of memory error” when you start a new drawing, try creating a new project, and use a previous drawing to ‘Save As’ a template for use instead.

If your AutoCAD 2000 setup is not starting after 45 minutes, try rebooting, then restart the steps above. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try installing AutoCAD 2000 from Windows Safe Mode

Plotting – if you are having plotting issues, either
- Install the AutoCAD 2000 plotupdate patch
- Download Autodesk DWG TrueView 2015 – it’s free and allows the latest plotters and plotting configurations.
If you are getting a WinHelp() error when pressing F1 to try and access the Help system then simply install the WinHelp (WinHlp32.exe) module from Microsoft
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing AutoCAD 2002 Express Tools on Windows 7, Windows 8 and Windows 10

Posted on July 21, 2015 by simonbooth

If you are having trouble installing AutoCAD 2002 Express Tools with “This app cannot run on your PC” then read on…

Installing AutoCAD 2002 Express Tools (et1-9.exe) on Windows 7, Windows 8 and Windows 8.1 32bit or 64bit can be very easily defined in these short steps.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

Obtain your copy of the Longbow Converter here
Next, make sure you have AutoCAD 2002 already installed – follow these steps Installing AutoCAD 2002 on Windows 7, Windows 8 and Windows 10
Unzip this zip file to c:\Autodesk
Start the Longbow Converter tool, select the 2nd tab, pick the newly created c:\Autodesk\ExpressTools2002 folder, and click Run. Read and understand all the prompts before pressing OK.
Now, I know it’s unheard of these days, but at this point expect to wait at least 45 minutes for your AutoCAD 2002 Express Tools setup.exe program to fully appear. Once the setup starts, stop and read the next step…
In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acad2002Et (not Program Files (x86)\AutoCAD Express Tools 2002 as usually prompted)**
1. Do not reboot if prompted to do so
Now you can happily run your Express Tools inside of AutoCAD 2002, simply start AutoCAD 2002 and to use Express Tools 2002 as normal..

Troubleshooting:

If your Express Tools 2002 setup is not starting after 45 minutes, try rebooting, then restart the steps above. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try the same steps as above in Windows Safe Mode

Installing AutoCAD 2000 Express Tools Volume 9 on Windows 7, Windows 8 and Windows 10

Posted on July 21, 2015 by simonbooth

If you are having trouble installing AutoCAD 2000 Express Tools with “This app cannot run on your PC” then read on…

Installing AutoCAD 2000 Express Tools Volume 9 (et1-9.exe) on Windows 7, Windows 8, Windows 8.1 and Windows 10 32bit or 64bit can be very easily defined in these short steps.

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

Obtain your copy of the Longbow Converter here
Next, make sure you have AutoCAD 2000 already installed – follow these steps Installing AutoCAD 2000 on Windows 7, Windows 8, Windows 8.1 and Windows 10
Unzip this zip file to c:\Autodesk
Start the Longbow Converter tool, select the 2nd tab, pick the newly created c:\Autodesk\Express Tools 2000 Volume 9 folder, and click Run. Read and understand all the prompts before pressing OK.
Now, I know it’s unheard of these days, but at this point expect to wait at least 45 minutes for your AutoCAD 2000 Express Tools setup.exe program to fully appear. Once the setup starts, stop and read the next step…
In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acad2000Et (not Program Files (x86)\AutoCAD Express Tools as usually prompted)**
1. Do not reboot if prompted to do so
Now you can happily run your Express Tools inside of AutoCAD 2000 running on Windows 7, Windows 8 and Windows 10 – using Windows Explorer, simply navigate to c:\acad2000 and double click acad.exe to start AutoCAD 2000 and to use Express Tools 2000

Troubleshooting:

If your Express Tools 2000 setup is not starting after 45 minutes, try rebooting, then restart the steps above. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try the same steps as above in Windows Safe Mode

Installing Autodesk Land Desktop 2005 on Windows 7, Windows 8 and Windows 10

Posted on July 15, 2015 by simonbooth

Installing AutoCAD LDT 2005 on Windows 7, Windows 8, Windows 8.1 and Windows 10 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
Copy your LDT 2005 installation CD media to your hard drive, to a folder path c:\Autodesk\ldt2005
1. NOTE: If you have more LDT specific CD’s (not Survey or Civil as these are installed separately), simply copy the contents of each CD directly over the top of Disk 1, basically, overwrite all files in your previously copied c:\Autodesk\ldt2005 folder with the files from each of the CDs
Next, start the Longbow Converter tool
1. select the 2nd tab named “Old AutoCAD Installer Reviver“
2. pick the c:\Autodesk\ldt2005 folder (where you copied your LDT CDs to on your hard drive)
3. click the Run Old Installer button.
  1. Read and understand all the prompts before pressing OK.
  2. Once the setup starts, stop and read the next step…
In the setup program, navigate through each setup dialog as normal, with these exceptions… (if you cannot move past the first screen in the setup, see Trouble Shooting below)…
1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\ldt2005 (not C:\Program Files (x86)\Autodesk Land Desktop 2005 that is defaulted)**.
3. If asked to reboot after the install, say NO
Once installed
1. do not reboot
2. make sure you fully close the AutoCAD setup program (because the Converter is waiting for the setup program to fully close) then
3. go back to the Converter tool
4. select the 3rd tab named “Old AutoCAD Program Reviver“
5. pick the newly installed c:\ldt2005 folder
6. click the Fix Old Program button.
Now you can run your Autodesk LDT 2005 on Windows 7, Windows 8 and Windows 10, both 32bit and 64bit.
1. NOTE: When starting AutoCAD, if you see a warning dialog when you run saying “This program has known compatibility issues“, simply click “Don’t show this message again” and then click “Run the Program…“

Troubleshooting:

– If you are seeing this error when running either the “Import LandXML” or “Export LandXML” commands

LandXML Export – Run-time error ‘429’ ActiveX component can’t create object

then LDT 2005 Fixed VBA Modules into the same folder as your acad.exe (using the instructions above, it should be c:\ldt2005)

– If you are unable to activate your product, or the activation process crashes immediately on startup:

Try uninstalling the July 2014 Microsoft security update
Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
If all else fails, call Autodesk – they can authorize your software for you; you will need to give them proof of purchase, your serial number and request code.

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing Inventor R11 (2007) on Windows 7, Windows 8 and Windows 8.1

Posted on June 15, 2015 by simonbooth

***** NOTE: This solution is currently broken, we are actively trying to resolve it – more soon *****

Installing Inventor 2007 on Windows 7, Windows 8 or Windows 8.1 32bit or 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here – you will need V8.11 or newer
Copy your entire Inventor R11/Inventor 2007 CD to your hard drive, to a folder path c:\Autodesk\inventor2007
Start the Longbow Converter tool, select the 2nd tab, pick the c:\Autodesk\inventor2007 folder, and click “Run Old Installer”. Read and understand all the prompts before pressing OK. Once the setup starts, stop and read the next step…
In the setup program, navigate through each setup dialog as normal, with these exceptions…
1. When you click the Install Autodesk Inventor 11 link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – if this happens, simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
2. I recommend that you do not install Vault or Autodesk Data Management Server – disable these options in the setup
3. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\inventor2007\ (not Program Files (x86)\Autodesk\)**
4. If there are any errors installing .NET Framework Runtime 1.1 sp1 – simply ignore and continue.
5. You may see an error “error 26001. Cannot connect to Internet Information Server. (-2147221164) ” – I’m not sure what causes this problem, most likely Autodesk has shutdown the service, but you should simply click “Ignore” if you see this message.
6. You may see an additional error popup “Error 29001. Vault management error: The request failed with HTTP status 404: Not Found.” – simply ignore by clicking “OK”
Once installed, make sure you fully close the Autodesk Inventor 11 setup program (because the Converter is waiting for the setup program to fully close) then go back to the Converter tool, select the 3rd tab, pick the newly installed c:\inventor2007 folder and click “Fix Old Program”.
Next, before running your Inventor 2007, install all the sp’s in chronological order (NOTE if you cannot install the sp’s, see the Troubleshooting section below)
Now you can run your Autodesk Inventor 11 on Windows 7, Windows 8 and Windows 8.1, both 32bit and 64bit.
1. NOTE: When starting Inventor 11, if you see a warning dialog when you run saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program…”

Troubleshooting:

– If you cannot install your Inventor 11 Service Packs because of an error “The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may be a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch” – rather than try and solve this issue, the easiest solution is:

To go back to your old Windows XP machine and make sure that all of the sp’s are installed on your old Windows XP machine’s installation of inventor 11
Next, simply copy all of the Inventor 11 program files and folders from your old Windows XP machine to a USB drive – copy the “contents” of C:\Program Files\Autodesk\Inventor
Now transfer the USB to your new machine and copy the files that were on your old Windows XP machine’s C:\Program Files\Autodesk\Inventor folder into your newly installed c:\inventor2007 folder – you should see a question if you should overwrite all files, say YES

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of Inventor please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Upgrading your existing AutoCAD to Windows 10 and Windows 11

Posted on June 13, 2015 by simonbooth

So you have an old PC with a working copy of AutoCAD and you want to upgrade to Windows 10? STOP and read this whole blog first before you wipe your working PC…

Autodesk License Activation for older versions of AutoCAD

That’s right, Autodesk no longer support versions of AutoCAD (at the time of writing 2014 or earlier) which means that they will not give you a new authorization code. That means you will have to activate your AutoCAD license without Autodesk – you do have some options:

First try activation via this offline process that Autodesk recently added
If you have an activation code, try an Offline Activation
Transfer your existing AutoCAD license from your old PC to your new PC. Your AutoCAD install CD comes with utility to do the job, see below…
NOTE: A good idea (before transfering the AutoCAD license from your old PC to the new PC) is to setup AutoCAD to run in offline mode then clone your old PC hard drive. This ensures you have a backup of your old PC with a valid license.

NOTE: Apparently, the license transfer will fail if your license is invalid. Some examples we heard about failing are: it’s a USA license running in a different country or it’s an Education License or you used a serial number that was compromised
1. AutoCAD 2009 or older – transfer license using the Autodesk Portable License Transfer Utility
  
  NOTE: AutoCAD 2006/2007 users – you MUST install this patch so you do not lose your activation through a bug in the software once it is transferred to the new PC
2. AutoCAD 2010 or newer – transfer license using the License Transfer Utility
If you have an Autodesk Network licensing setup, keep it. Apparently, if you have this you are completely safe from shutdown and you can move to new systems without problems.
Call Autodesk an explain your situation, we heard some people managed to get an activation code because their existing one was lost through software fault.
Go back to an older version of AutoCAD. AutoCAD R13, R14, 2000, 2000i, 2002, 2004 and some versions of 2005 don’t require online activation therefore, as long as you have the original activation codes, they can still be used.
- They all run perfectly on Windows 10, but you will need to install them using our Converter App (click for install instructions R13 R14 2000 2000i 2002 2004 2005)
- If you have DWG files saved by newer versions of AutoCAD then simply use the free Autodesk DWGTrueview App (which is a cut down version of AutoCAD) to convert your DWG file save versions back to an earlier version.
For information purposes only: There is an AutoCAD Keygen application online called “X-Force” which you can use to generate your authcode. NOTE: using a keygen is highly illegal when using hacked serial numbers, we don’t recommend it. Some ask if it is still illegal to use a keygen with a paid/valid serial number? You need to do your own legal checks on that question before using a keygen.

Is it possible to protect your working AutoCAD from losing its license?

Yes. The latest version of our Converter App (12.30 or newer) has a new “Block Internet Connection” feature which disables all internet access to and from your AutoCAD, this makes it impossible for your AutoCAD license to be deactivated at some point in the future (with the disadvantage that you lose any internet based features in AutoCAD)

Windows XP and Windows Vista AutoCAD users upgrading to Windows 10

For those of you who are still running AutoCAD on Windows XP and want to upgrade to Windows 10, you will need to

Get a new Windows 10 PC, preferably one without (or disabled) Intel onBoard graphics.
Once you have a Windows 10 PC, run Windows Update until there are no more updates left to be installed.
Next, install your AutoCAD using the Converter app…
1. click on the version of AutoCAD you have (it explains all that you need to do) : AutoCAD R14 AutoCAD 2000 AutoCAD 2000i AutoCAD 2002 AutoCAD 2004 AutoCAD 2005 AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 32bit AutoCAD 2009 32bit AutoCAD 2010 32bit AutoCAD 2011 32bit AutoCAD 2012 32bit AutoCAD 2013 32bit AutoCAD 2014 32bit
2. NOTE: If you can’t find your version listed, use the “Search” at the top left of this page
3. Transfer the AutoCAD license as described above

Windows 7, Windows 8 and Windows 8.1 AutoCAD users upgrading to Windows 10

Here’s how to upgrade your PC to Windows 10 so that you can carry on using AutoCAD…

Transfer your existing AutoCAD license from your old PC to your new PC. Your AutoCAD install CD comes with utility to do the job, see below… (A good idea is, before you transfer the AutoCAD license from your old PC to the new PC clone your old PC hard drive. This ensures you have a backup of your old PC with a valid license)
1. AutoCAD 2009 or older – transfer license using the Autodesk Portable License Transfer Utility
  
  NOTE: AutoCAD 2006/2007 users – you MUST install this patch so you do not lose your activation through a bug in the software once it is transferred to the new PC
2. AutoCAD 2010 or newer – transfer license using the License Transfer Utility
Next, uninstall all AutoCAD versions on your system; it’s very important that you do this, if you don’t the Autodesk licensing system may get corrupted when you upgrade to Windows 10 at which point you will have to wipe the computer and start again.
Now Upgrade to Windows 10
Obtain the latest Longbow Converter supporting Windows 10 here
Next, install your AutoCAD using the Converter app…
1. click on the version of AutoCAD you have (it explains all that you need to do) : AutoCAD R14 AutoCAD 2000 AutoCAD 2000i AutoCAD 2002 AutoCAD 2004 AutoCAD 2005 AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 32bit AutoCAD 2009 32bit AutoCAD 2010 32bit AutoCAD 2011 32bit AutoCAD 2012 32bit AutoCAD 2013 32bit AutoCAD 2014 32bit
2. If you can’t find your version listed, use the “Search” at the top left of this page
3. AutoCAD 2006/2007 users – you MUST install this patch so you do lose your license activation randomly

What happens if you already upgraded to Windows 8.1 with your existing AutoCAD installation – most likely your AutoCAD will not run, nor will you be able to repair it. The best thing to get your AutoCAD running again is to carry out a Windows Reset.

Users of 32bit AutoCAD versions 2002 thru 2013 and running or Windows 7 upgrading to Windows 8.1

If you have a working Windows 7 machine and you are thinking to upgrade to Windows 8.1 best just stay where you are. Better to upgrade to Windows 10, aside from being a free upgrade, it seems to be a much better platform too.

With that said, if you must upgrade your working Windows 7 system to Windows 8.1, then it is of course possible using our Longbow Converter tool – you ***must*** first uninstall all AutoCAD products before doing the upgrade. Once Windows 8.1 has been installed, just use the Longbow Converter to re-install your 32bit AutoCAD software as before.

What happens if you already upgraded to Windows 8.1 with your existing AutoCAD installation – most likely your AutoCAD will not run, nor will you be able to repair it. The best thing to get your AutoCAD running again is to carry out a Windows Reset.

Users of 64bit AutoCAD versions 2002 thru 2013 and running or Windows 7 upgrading to Windows 8.1

With that said, if you must upgrade your working Windows 7 system to Windows 8.1, then it is of course possible using our Longbow Converter tool – you ***must*** first uninstall all AutoCAD products before doing the upgrade. Once Windows 8.1 has been installed, install your 64bit AutoCAD products as normal then use the Longbow Converter to fix all 64bit AutoCAD 2008 thru 2013 Windows 8 issues

Downloading full 32bit AutoCAD installation media from Autodesk

Posted on May 29, 2015 by simonbooth

Here are download links to Autodesk’s full 32bit AutoCAD versions (from Autodesk so totally safe)

AutoCAD 32bit

Autodesk Viewers

Free AutoCAD DWG & DWF Viewers

Installing 32bit AutoCAD Mechanical 2008 on Windows 7, Windows 8 and Windows 10

Posted on May 28, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Mechanical 2008…

“This operating system is not supported by AutoCAD® Mechanical®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Mechanical® 2008. It cannot be installed on 64-bit Windows”

Installing 32bit AutoCAD Mechanical 2008 on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs (if not check (3) below):
1. Using Windows Explorer, copy Disk 1 of your AutoCAD Mechanical 2008 CD to your hard drive, to a folder path c:\Autodesk\AutoCADM2008
2. If you have more CD’s, copy them all directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\AutoCADM2008 folder
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\AutoCADM2008), now click OK. Wait until all of the files have extracted, when they do, the AutoCAD Mechanical 2008 setup will automatically launch – simply close it and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\AutoCADM2008 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Simply install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Mechanical 2008 folder, then click Fix
Now you can happily run your AutoCAD Mechanical 2008 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10!

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Install 32bit AutoCAD 2016 on Windows 7, Windows 8 and Windows 10

Posted on May 28, 2015 by simonbooth

These instructions solve issues around installing/running your old AutoCAD 2016 on newer versions of 64bit Windows 7, Windows 8 and Windows 10. Some common issues are error messages like these…

“This operating system is not supported by AutoCAD® 2016”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® 2016. It cannot be installed on 64-bit Windows”

How to install AutoCAD 2016

Obtain your purchased copy of the Longbow Converter here
Start the Converter App and note the user interface
Select the 1st tab named “AutoCAD 32bit Installer Converter“
1. Using the “. . .” button, selection your AutoCAD installation CD
2. Next, click the “Convert“ button and follow instructions
Once the conversion process is complete
1. click Install/Run Setup to start setup
2. Simply install as normal, remembering to…
  1. Close the setup program when the installation is complete.
  2. Now back in the Converter app and make sure it’s completed the final stage of processing using the “Old AutoCAD Program Reviver” tab
Now run your AutoCAD as normal
Once installed, we recommend you disable the AutoCAD Communication Center/InfoCenter toolbar as it uses a lot of computer memory and causes slow startup and most people don’t use it anyway!

Troubleshooting

– If your AutoCAD starts with a blank white screen…

Try turning down your screen resolution, if this doesn’t help…
- from the Converter tool, pick the Tools->Clean Compatibility settings

– If you are unable to activate your product, or the activation process crashes:

Try uninstalling the July 2014 Microsoft security update

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing AutoCAD R14 on Windows 7, Windows 8 and Windows 10

Posted on May 28, 2015 by simonbooth

As an existing AutoCAD R14 user, you most likely cannot do without your beloved AutoCAD R14. With the latest hardware and required move to new Windows versions, trying to install your AutoCAD R14 gives an error like this one…

Windows 16bit setup error – This app can’t run on your PC, check software publisher

“FATAL ERROR: HEAP ERROR”

MEM_BAD_POINTER

You can solve these problems easily using our Longbow Converter App – fix and manage your AutoCAD R14 on new versions of Windows 7, 8 and 10 64bit

How to install AutoCAD R14

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

Obtain your copy of the Longbow Converter here
NOTE: We recommend turning off Windows UAC before installing AutoCAD R14
Start the Longbow Converter application…
1. Place your AutoCAD R14 CD in the CDRom Drive
2. Select the 2nd tab named “Old AutoCAD Installer Reviver“
3. Using the “. . .” button, select your AutoCAD R14 installation CD
4. Next, click the “Run Old Installer” button and follow the onscreen instructions
  1. Now, I know it’s unheard of these days, but at this point expect to wait up to 45 minutes for your AutoCAD R14 setup.exe program to appear, be patient…
5. Once the setup starts, stop and read the next steps all the way to the end! By the way, if your AutoCAD R14 setup does not start after 45 minutes, read the Troubleshooting section below.
In the AutoCAD R14 setup program…
1. navigate through each setup dialog as normal, with these exceptions…
  1. Make sure you do a Typical Install (not a Full Install)
  2. When you get to the installation folder input dialog **it’s vitally important to make sure you install to c:\acadR14 (not .\AutoCAD R14 as usually prompted)**
Now carry on with the install
1. Do not reboot once the install is complete
2. Ignore any errors related to not being able to create the shortcut e.g. “Cannot Create folder ‘AutoCAD R14’“, you will have to create a shortcut on your computer Desktop to your c:\acadR14\acad.exe by hand.
3. Again, do not reboot if prompted to do so
Once your AutoCAD R14 setup has completed the installation…
1. Make sure you fully close the setup program.
2. Once the setup is closed the Converter will automatically fix the c:\acadr14 program files. You should see “Success!” displayed in the 3rd tab named “Old AutoCAD Program Reviver“
3. Reboot your PC
Now you can happily run your AutoCAD R14 on Windows 7, Windows 8, or Windows 10 32bit or 64bit…
1. Using Windows Explorer, navigate to c:\acadR14 and double click acad.exe

Troubleshooting

If your AutoCAD R14 setup is not starting after 45 minutes…
1. First try turning off UAC, rebooting, then restart the steps above.
2. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try installing R14 from Windows Safe Mode
If you are getting either a Bad Mem Pointer error and or a Smartheap handler recursively re-entered error when you start your AutoCAD R14 then you need to re-run all the steps above, taking care to do each step precisely as it says, most likely you are missing from step 5 or you have not installed to c:\acadR14 as stated in step (7) above.
When starting AutoCAD, if you receive an ‘acad.exe – System Error’ message: The program can’t start because ac1st15.dll is missing from your computer. Try reinstalling the program to fix this problem. If you carried out step (7) above, then try rebooting your PC
If you are getting a WinHelp() error when pressing F1 to try and access the Help system then simply install the WinHelp (WinHlp32.exe) module from Microsoft
Issues with Calcomp Digitizer – Calcomp Digitizer not working
If the setup displays an error message
InstallError (IUO)
(X) not enough space(IUO)

try unplugging any External USB drives
Plotting issues? If you get an error splwow64.exe “The application was unable to start correctly” with error “0xc0000005”
1. Make sure your Anti-virus and/or Windows Firewall is not blocking splwow64.exe
2. If the problem persists
  1. First, note that you need the latest version of the Converter App
  2. Start the Converter App
  3. Select the 3d tab “Old AutoCAD Program Reviver”
  4. Click the Tools Menu->Reduced Power Mode
  5. Using the “…” button, pick your acad.exe folder e.g. c:\acadr14
  6. Click “Fix Old Program” and follow prompts
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing AutoCAD Architecture 2007 on Windows 7, Windows 8 and Windows 10

Posted on May 18, 2015 by simonbooth

Installing AutoCAD Architectural Desktop 2007 (ADT 2007) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

Obtain your copy of the Longbow Converter here
Copy your AutoCAD Architectural Desktop 2007 CD to your hard drive, to a folder path c:\Autodesk\adt2007
1. If you have more CD’s, copy them all directly over the top of Disk 1, basically, overwrite all files in your previously copied c:\Autodesk\adt2007 folder
Start the Longbow Converter tool, select the 2nd tab, pick the c:\Autodesk\adt2007 folder, and click Run. Read and understand all the prompts before pressing OK. Once the setup starts, stop and read the next step…
In the setup program, navigate through each setup dialog as normal, with these exceptions…
1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\adt2007 (not Program Files (x86)\AutoCAD Architectural Desktop 2007)**.

Once installed, make sure you fully close the AutoCAD Architectural Desktop setup program (because the Converter is waiting for the setup program to close) then go back to the Converter tool, select the 3rd tab, pick the newly installed c:\adt2007 folder and click Fix.
Next, run your AutoCAD Architectural Desktop 2007
1. NOTE: If you see a warning dialog when you run saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program without getting help”
You can now happily run your AutoCAD Architectural Desktop 2007 on Windows 7, Windows 8, Windows 8.1 and Windows 10!

Installing AutoCAD Architectural Desktop 2007 Service Pack 1

English Users, Download your English AutoCAD 2007 sp1 from here
Now copy your newly downloaded sp (for English users the filename is adt2007swlsp1enu.exe) to folder path c:\Autodesk\sp
Start the Converter, select the 3rd tab, pick the c:\Autodesk\sp folder and click Fix.
Now run the adt2007swlsp1enu.exe from Windows explorer to install as normal.

Troubleshooting:

– If your ADT menuing system does not appear correctly for some reason, start AutoCAD, type CUILOAD at the command line, pick Browse and navigate to %APPDATA%\Autodesk\ADT 2007\enu\Support, pick the adt.cui file, then click Load

– If you are unable to activate your product, or the activation process crashes:

Try uninstalling the July 2014 Microsoft security update
Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
Perhaps you have a SATA drive – Activation problems with AutoCAD 2006 and AutoCAD 2007

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Rollback your Windows System using Windows System Restore

Posted on May 14, 2015 by simonbooth

You may find one day that your perfectly working AutoCAD suddenly no longer works anymore – why could this be? Well, the main reason is due to some newly installed application conflicting with you existing installation. The best way to solve this problem is to use Windows System Restore…

Here’s how:

Windows 7 Users – How to use Windows System Restore for Windows 7
Windows 8 Users – How to use Windows System Restore for Windows 8 and click on ‘Restore your PC to an earlier point in time’

Installing AutoCAD 2000 on Windows 7, Windows 8 and Windows 10

Posted on May 1, 2015 by simonbooth

Most current AutoCAD 2000 users are very used to the software package and cannot do without it. With the latest hardware and required move to new Windows versions, trying to install your AutoCAD 2000 gives an error like this one…

Windows 16bit setup error – This app can’t run on your PC

Or maybe this error…

Setup Halted System requirements error Wrong OS, AutoCAD supports Windows NT 4.0, Windows NT 5.0, Windows 95 and Windows 98

Error while trying to install AutoCAD 2000

…all is not lost, just read on…

How to install AutoCAD 2000

A quick word of advice: best to follow the instructions below precisely and to the letter, including folder names and paths, that way you will reduce the risk of having any problems…

Obtain your copy of the Longbow Converter here
Before starting, we recommend turning off Windows UAC
Now, start the Longbow Converter tool by double clicking the Longbow Converter shortcut on your Desktop… .
1. Insert your AutoCAD 2000 CD
2. Select the 2nd tab titled “Old AutoCAD Installer Reviver” by clicking on it
3. Next, using the ‘…’ button select your AutoCAD 2000 CD
4. Now click the “Run Old Installer” button.
  1. Read, understand and follow all the prompts.
For AutoCAD 2000, the Migration Wizard almost instantly pops up
1. simply click “Install 2000” as normal.
2. Now, I know it’s unheard of these days, but at this pointexpect to wait at least 45 minutes for your AutoCAD 2000 setup.exe program to fully appear – please be patient
3. Once the setup starts, stop and read the next step…
In the setup program, navigate through each setup dialog as normal, except when you get to the installation folder, **it’s vitally important to make sure you install to c:\acad2000 (not Program Files (x86)\AutoCAD 2000 as usually prompted)** e.g.
$Setting AutoCAD 2000 custom install directory to c:\acad2000$
Setting AutoCAD 2000 custom install directory to c:\acad2000
1. Once you have set the Destination Folder to c:\acad2000, install as normal
  1. Ignore the error message that the shortcut cannot be created “Cannot create folder AutoCAD 2000“, you will need to create the program shortcut by hand once the installation is finished.
2. Do not reboot if prompted to do so
Once setup has completed…
1. Make sure to fully close the setup program
2. Back in the Converter app, make sure it has completed the final stage of processing using the “Old AutoCAD Program Reviver” tab – it should display “SUCCESS” in green…
Now Reboot your PC
Your AutoCAD 2000 is ready to run as it is right now, simply use Windows Explorer, navigate to c:\acad2000 and double click acad.exe (if you want a shortcut on the Desktop you will have to manually create it).

Installing AutoCAD 2000 Express Tools

If you rely on AutoCAD 2000 Express Tools or you are seeing “Missing Application: RTEXT” Proxy dialog when you are loading on a drawing, here are the instructions for installing Express Tools Volume 9 for AutoCAD 2000

Installing AutoCAD 2000 ObjectDBX Classes Object Enabler

Download AutoCAD 2000 ObjectDBX Classes Object Enabler from here
Unzip to folder path c:\Autodesk
Start the Converter
1. select the 2nd tab named “Old AutoCAD Installer Reviver“
2. Using the “…” button, pick the c:\Autodesk\AutoCAD 2000 – ObjectDBX Classes Object Enabler folder
3. click ‘Run Old Installer‘
4. Install as normal

Installing AutoCAD 2000 AEC Object Enabler 2.11

Download AutoCAD 2000 AEC Object Enabler 2.11 from here
Unzip your newly downloaded sp to folder path c:\Autodesk\AutoCAD2000-AEC211
Start the Converter
1. select the 2nd tab named “Old AutoCAD Installer Reviver“
2. Using the “…” button, pick the c:\Autodesk\AutoCAD2000-AEC211 folder
3. click ‘Run Old Installer‘
4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal

Installing AutoCAD 2000 Architectural Object Enabler 3.02

Download AutoCAD 2000 Architectural Object Enabler 3.02 from here
Unzip and install as normal

Installing AutoCAD 2000 Service Pack 1

Download AutoCAD 2000 sp1 from here
1. Unzip the downloaded zip file to folder path c:\Autodesk\sp
Start the Converter
1. select the 2nd tab named “Old AutoCAD Installer Reviver“
2. pick the c:\Autodesk\sp\AutoCAD 2000 sp1 folder
3. click ‘Run Old Installer‘
4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal

Installing AutoCAD 2000 Service Pack 2

Download AutoCAD 2000 sp2 from here
Unzip the downloaded zip file to folder path c:\Autodesk\sp
Start the Converter
1. select the 2nd tab named “Old AutoCAD Installer Reviver“
2. pick the c:\Autodesk\sp\AutoCAD 2000 sp2 folder
3. click ‘Run Old Installer‘
4. Wait for the setup to appear, it could take up to 45 minutes, then install as normal

Installing AutoCAD 2000 3D Graphics System Update 1

If you use 3D a lot in AutoCAD 2000, you should read on to install the 3DUpdate…

Download AutoCAD 2000 3D Graphics System Update1 from here
Unzip your newly downloaded sp to folder path c:\Autodesk\update
Start the Converter, select the 2nd tab, pick the c:\Autodesk\update folder and click ‘Run’
Wait for the setup to appear, it could take up to 45 minutes, then install as normal.

NOTE: Some users have found that the 3D Graphics System Update runs through the install as normal but doesn’t actually update the modules. If you suspect this is true, contact Longbow Software Support.

Troubleshooting

If your AutoCAD 2000 setup is not starting after 45 minutes
- try rebooting, then restart the steps above. If it is still failing, most likely it’s because of another application on your system which is preventing our setup routine from starting (perhaps anti-virus, or similar) – try installing AutoCAD 2000 from Windows Safe Mode
If when you start AutoCAD, you see error messages about missing missing aclst15.dll or missing ACUTIL15.dll or missing ACDB15.dll or missing acge15.dll
- In the Converter app Using the 3rd tab, pick your c:\acad2000 folder and click ‘Fix’. Then reboot…
- If this doesn’t fix the problem, contact Longbow Software Support.

Plotting – if you are having plotting issues, either
- Install the AutoCAD 2000 plotupdate patch
- Download Autodesk DWG TrueView 2015 – it’s free and allows the latest plotters and plotting configurations.
If you see Proxy Warning Dialogs when you open a DWG using AutoCAD 2000, you need to install the service packs as described above.
If you are getting a WinHelp() error when pressing F1 to try and access the Help system then simply install the WinHelp (WinHlp32.exe) module from Microsoft
Issues with Calcomp Digitizer – Calcomp Digitizer not working
If you still see the error “Wrong OS, AutoCAD supports Windows NT 4.0, Windows NT 5.0, Windows 95 and Windows 98” even after converting
- Copy the AutoCAD 2000 CD fresh to your computer, then start from step (1) again
- If you still get the error, you need the latest version of the Longbow Converter tool
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing AutoCAD Architecture 2005 on Windows 7, Windows 8 and Windows 10

Posted on April 13, 2015 by simonbooth

Installing AutoCAD Architectural Desktop 2005 (ADT 2005) on Windows 7, Windows 8, Windows 8.1 or Windows 10 32bit or 64bit can be very easily defined in these short steps…

Obtain your copy of the Longbow Converter here
Copy your AutoCAD Architectural Desktop 2005 installation CD to your hard drive, to a folder path c:\Autodesk\adt2005
1. If you have more than one CD, simply copy them all directly over the top of the first CD, basically, overwrite all CD1 files in your previously copied c:\Autodesk\adt2005 folder with CD2
Start the Longbow Converter tool
1. Select the 2nd tab named “Old AutoCAD installer Reviver“
2. Pick the c:\Autodesk\adt2005 folder
3. Click the “Run Old Installer” button.
  1. Read and understand all the prompts before pressing OK. Once the setup starts, stop and read the next step…
In the setup program, navigate through each setup dialog as normal, with these exceptions…
1. When you click the Install link from your setup you may see a dialog box appear saying – “This program has compatibility issues” – simply check the “Don’t show this message again” and then click the “Run the program without getting help”.
2. When you arrive at the installation folder path setup dialog, **it’s vitally important to make sure you install to c:\adt2005 (not Program Files (x86)\AutoCAD Architectural Desktop 2005 as prompted by default)**.

Once installed, make sure you fully close the AutoCAD Architectural Desktop setup program (because the Converter is waiting for the setup program to close) then
1. Go back to the Converter tool
2. Select the 3rd tab named “Old AutoCAD Program Reviver”
3. Pick the newly installed c:\adt2005 folder and click the “Fix” button at the bottom.
Next, run your AutoCAD Architectural Desktop 2005
1. NOTE: If you see a warning dialog when you run saying “This program has known compatibility issues”, simply click “Don’t show this message again” and then click “Run the Program without getting help”
You can now run your AutoCAD Architectural Desktop 2005 on Windows 7, Windows 8, Windows 8.1 and Windows 10 but first we recommend you install the following Service Packs…

Installing AutoCAD Architectural Desktop 2005 Service Pack 1

English Users obtain AutoCAD Architecture ADT 2005 sp1 from here
Now copy your newly downloaded sp (for English users the filename is adt2005swlsp1enu.exe) to folder path c:\Autodesk\sp
Start the Converter, select the 3rd tab, pick the c:\Autodesk\sp folder and click Fix.
Now run the adt2005swlsp1enu.exe from Windows explorer to install as normal.

Troubleshooting:

– If your ADT menuing system does not appear correctly for some reason, start AutoCAD, type CUILOAD at the command line, pick Browse and navigate to %APPDATA%\Autodesk\ADT 2005\enu\Support, pick the adt.cui file, then click Load

– If you are unable to activate your product, or the activation process crashes:

Try uninstalling the July 2014 Microsoft security update
Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
If all else fails, call Autodesk – they can authorize your software for you; you will need to give them proof of purchase, your serial number and request code.

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing Map 3D 2013 32bit on Windows 7, Windows 8 and Windows 10

Posted on March 26, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map3d 2013…

“This operating system is not supported by AutoCAD® Map 3D®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Map 3D® 2013. It cannot be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2013 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2013
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2013 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Map3d2013), now click OK. Wait until all of the files have extracted, when they do, note that the Map 3D 2013 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2013 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Map 3d 2013 folder, then click ‘Fix’.
Now you can happily run your Map 3D 2013 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit.

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing Map 3D 2012 32bit on Windows 7, Windows 8 and Windows 10

Posted on March 26, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map 3D 2012…

“This operating system is not supported by AutoCAD® Map 3D®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Map 3D® 2012. It cannot be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2012 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2012
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2012 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Map3d2012), now click OK. Wait until all of the files have extracted, when they do, note that the Map 3D 2012 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2012 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\Autodesk\AutoCAD Map 3d 2012 folder, then click ‘Fix’.
Now you can happily run your Map 3D 2012 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10 64bit.

Troubleshooting:

– If your AutoCAD crashes while interacting with the Ribbon click here

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing Map 3D 2011 32bit on Windows 7, Windows 8 and Windows 10

Posted on March 26, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map 3D 2011…

“This operating system is not supported by AutoCAD® Map 3D® 2011”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Map 3D® 2011. It cannot be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2011 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2011
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2011 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Map3d2011), now click OK. Wait until all of the files have extracted, when they do, note that the Map 3D 2011 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2011 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Map 3d 2011 folder, then click ‘Fix’.
Now you can happily run your Map 3D 2011 32bit on Windows 7, Windows 8 and Windows 10 64bit.

Troubleshooting:

– If you are unable to activate your product, or the activation process crashes:

– If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD

Installing Map 3D 2010 32bit on Windows 7, Windows 8 and Windows 10

Posted on March 26, 2015 by simonbooth

NOTE: This blog post specifically solves issues related to these error messages on installation of AutoCAD Map 3D 2010…

“This operating system is not supported by AutoCAD® Map 3D®”
“You cannot install this product on the current operating system”
“You are attempting to use a 32-bit installer on a 64-bit operating system”
“This is a 32-bit AutoCAD® Map 3D® 2010. It cannot be installed on 64-bit Windows”

Installing AutoCAD Map 3D 2010 32bit on Windows 7, Windows 8, Windows 8.1 or Windows 10 64bit can be very easily defined in these short steps…

NOTE: These steps do not bypass normal Autodesk licensing/authorization, you should expect to use your own serial numbers in the normal way.

Obtain your copy of the Longbow Converter here
If you have CDs:
1. Using Windows Explorer, copy Disk 1 of your Map 3D CD to your hard drive, to a folder path c:\Autodesk\Map3d2010
2. Next, if you have a second CD, copy Disk 2 of your Map 3D CD directly over the top of Disk 1, overwrite all files in your previously copied c:\Autodesk\Map3d2010 folder
3. Same again for Disk 3, if there is one
If you have a single self extracting exe downloaded from Autodesk
1. Run the exe, it will ask to unzip to a folder inside of c:\Autodesk, make a note of the folder for later use (we’ll refer to it from here as c:\Autodesk\Map3d2010), now click OK. Wait until all of the files have extracted, when they do, note that the Map 3D 2010 setup will automatically launch – make sure you close the setup and move to the next step.
Now, start the Longbow Converter tool, select the 1st tab, pick the c:\Autodesk\Map3d2010 folder, and click the Convert button.
Once the conversion process is complete, click Install/Run Setup to start setup. Next, just install as normal.
Windows 8, Windows 8.1 and Windows 10 users: Once the installation process is complete, go back to the Converter, select the 3rd tab, pick the newly installed C:\Program Files (x86)\AutoCAD Map3d 2010 folder, then click ‘Fix’.
Now you can happily run your Map 3D 2010 32bit on Windows 7, Windows 8, Windows 8.1 and Windows 10 64bit.

Troubleshooting:

If your installed AutoCAD is hanging on startup then read this post first AutoCAD Freezes on startup (AutoCAD visible but the menus don’t appear)
if your AutoCAD hangs on startup (stuck at the “Checking License…” message, try installing the 32bit version of AutoCAD 2010 on 64bit Windows – we’ve actually found the 32bit AutoCAD 2010 running on 64bit Windows is much more stable and actually faster than the 64bit version of AutoCAD 2010.
If your AutoCAD crashes while interacting with the Ribbon click here
If you are unable to activate your product, or the activation process crashes:
1. Try uninstalling the July 2014 Microsoft security update
2. Try downgrading your Internet Explorer (IE) from version 11 to version 10 by following the instructions detailed here
If you have crashing problems using the File->Open or File->Save dialogs inside of AutoCAD please read this blog entry on the File->Open or File->Save Crash in AutoCAD
If your Windows hangs on startup after installing please refer to this help blog

by Simon Booth

How to install AutoCAD LT 2012

Installing AutoCAD LT 2012 Service Packs

Troubleshooting

How to install Mathcad 2000

MathCAD 2000 Pro Update

Troubleshooting

Autodesk License Activation for older versions of AutoCAD

Is it possible to protect your working AutoCAD from losing its license?

Windows XP and Windows Vista AutoCAD users upgrading to Windows 10

Windows 7, Windows 8 and Windows 8.1 AutoCAD users upgrading to Windows 10

Users of 32bit AutoCAD versions 2002 thru 2013 and running or Windows 7 upgrading to Windows 8.1

Users of 64bit AutoCAD versions 2002 thru 2013 and running or Windows 7 upgrading to Windows 8.1

AutoCAD 32bit

Autodesk Viewers

How to install AutoCAD 2016

Troubleshooting

“FATAL ERROR: HEAP ERROR”

MEM_BAD_POINTER

How to install AutoCAD R14

Troubleshooting

How to install AutoCAD 2000

Installing AutoCAD 2000 Express Tools

Installing AutoCAD 2000 ObjectDBX Classes Object Enabler

Installing AutoCAD 2000 AEC Object Enabler 2.11

Installing AutoCAD 2000 Architectural Object Enabler 3.02

Installing AutoCAD 2000 Service Pack 1

Installing AutoCAD 2000 Service Pack 2

Installing AutoCAD 2000 3D Graphics System Update 1

Troubleshooting